audiority Flanger Electric Matter User Guide

: August 5, 2024
: audiority

Table of Contents

audiority Flanger Electric Matter
Electric Matter
Electric Matter
FILE LOCATIONS
USER AREA AND REDEEM CODES
CHANGELOG
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

audiority Flanger Electric Matter

Electric Matter

(AAX, AU, CLAP, VST2, VST3) produced by Luca Capozzi (Audiority Srls), April 2022

Current Manual version: v1.3
The Electric Matter is a faithful simulation of the Electro-Harmonix® Deluxe Electric Mistress™, a late 70’s BBD flanger and filter matrix pedal. This flanger, featuring a Reticon SAD1024 BBD chip, has been used by countless artists for either subtle, to make leads dreamy and divine, or more prominent to emulate Leslie rotors. Compared to the classic version, the Deluxe models feature a different LFO and VCO circuit, leading to a wider range of settings. Our Electric Matter goes further by fixing the tone sucking and volume drop often related to these hardware units. Please, read carefully both product specifications and system requirements before purchasing any Audiority product.

All product names used in this website (www.audiority.com) are trademarks of their respective owners, which are in no way associated or affiliated with Audiority. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Audiority’s sound model development. Electric Mistress, Deluxe Electric Mistress, and Electro-Harmonix are registered trademarks of New Sensor Corp.

Electric Matter

produced by Audiority, April 2022.

Credits

Code & DSP: Luca Capozzi (Audiority Srls), April 2022
GUI Design: Luca Capozzi Published by Audiority Srls Copyright © 2022-2024 – Audiority Srls – All rights reserved.

Specifications

BBD Analog Flanger simulation
Color, Range and Rate controls
Filter Matrix mode
Tempo Sync
Stereo Spread
Through-Zero Mode
Vintage Mode
Pre and Post effect gain
Mix control
Resizable interface

System Requirements

Windows 7 64bit or later
Intel i5 or equivalent
4 GB RAM
Screen resolution: 1024×768
VST2, VST3, AU, CLAP 64-bit host
PT11 or higher, AAX 64-bit host

MAC (Intel)

OSX 10.13 or later
Intel i5 or equivalent
4GB RAM
Screen resolution: 1024×768
VST2, VST3, AU, CLAP 64-bit host
PT11 or higher, AAX 64-bit host

MAC (Silicon)

macOS 11.0 or later
M1 or higher
4 GB RAM
Screen resolution: 1024×768
VST2, VST3, AU, CLAP 64-bit host
PT11 or higher, AAX 64-bit host

FILE LOCATIONS

Mac
All presets, license, IR files and settings are located in:/Users/Shared/Audiority/ AAX, CLAP and VST plugins will be placed in their own Audiority sub-folder located in:

AAX: /Library/Application Support/Avid/Audio/Plug-Ins/Audiority
CLAP: /Library/Audio/Plug-Ins/CLAP/Audiority
VST: /Library/Audio/Plug-Ins/VST/Audiority
VST3: /Library/Audio/Plug-Ins/VST3/Audiority

All presets, licenses, IR files, and settings are located to: C:\Users\Public\Public Documents\Audiority AAX, CLAP and VST plugins will be placed in their own Audiority sub-folder, usually located in:

AAX: C:\Program Files\Avid\Audio\Plug-Ins\Audiority
CLAP: {Your CLAP Path}\Audiority
VST: {Your VST Path}\Audiority
VST3: {Your VST3 Path}\Audiority

PLUGIN ACTIVATION

Once you install and open the plugin for the first time, it will be in Demo Mode until a license file is loaded. In Demo Mode the plugin will output 3 seconds of silence every minute. You can activate the plugin either OFFLINE or ONLINE.

OFFLINE ACTIVATION
If you purchased the plugin from our site, you should have received an email to download the installers and the license file. Save the license file you got with your purchase email (or via our User Area) anywhere on your computer.
Then, to activate the plugin, click on the Audiority logo and select “Register”. The Registration window will pop up allowing you to load the license file you got while purchasing the plugin by clicking the “Load License” button. Alternatively, you can drag and drop the license file on the registration window.

NOTE: If you purchased the plugin from one of our dealers, please check the “USER AREA AND REDEEM CODES” section below.

ONLINE ACTIVATION

Insert your Username (or email address), your password and click the “Login” button. The license file will be automatically delivered in your computer and the plugin will be activated.

USER AREA AND REDEEM CODES

If you purchased from one of our dealers, then you should have received an email with a redeem code. This code is required to deposit a license in your User Area account and let you download the license file or activate the plugin online.
If you don’t have an User Area account yet, please follow these steps:

Go to https://www.audiority.com/register and fill out the signup form. If you are registered to our User Area, then you can activate the plugin online.
Once registered, log in to your account by clicking the User Area section of our site. Click the REDEEM section of your account and paste the code you received via email from our dealer.
After submitting the code, a license will be deposited in your account and will be shown in “MY PLUGINS” section of your User Area.
Now you can click “License File” and save the license anywhere on your computer and ready to be loaded through the plugin registration window. You can also skip this part and activate your plugin online (see previous section of this manual).

USER PATHS SETTING

By selecting “Settings” from the logo menu, you can change the path for the Presets, License, and IR folders. You can also disable our Newsfeed from here.

Note: Please do not move the Settings folder from its default location.

Plugin Parameters

TOOLBAR
The Toolbar allows you to manage the plugin presets, register the plugin, and set some global parameters. By clicking the AUDIORITY logo, in the top left corner of the Toolbar, you’ll be able to visit our website and social profiles, register the plugin, change the interface size and customize the paths for license and preset files. The HQ button will enable oversampling, useful for reducing aliasing when the signal saturates. Use the Randomize and Reset buttons to experiment with random presets or restore them to their saved version. Press CTRL+DOUBLE CLICK on any knob to manually assign a new value.

PARAMETERS

COLOR Adjusts the intensity of the flanger effect
RANGE Adjusts the lower limit of the flanger sweep
RATE Controls the speed of the flange modulation. This is disabled when FILTER MATRIX is enabled
FILTER MATRIX When enabled, the modulation is disconnected from the circuit, freezing the flanger and creating a matrix of filters. Use the RANGE knob to change the filter position and COLOR to set the depth of filtering

GLOBAL CONTROLS (Footer)

VINTAGE Switch between Deluxe (standard version for this plugin) and vintage 18V versions of this pedal
TZ / THRU-0 Sets Through-Zero Mode, where the dry signal is time aligned with the flanged one. It provides a different flanger color.
SYNC Syncs the modulation speed to the host
INPUT / OUTPUT Pre/Post effect gain
MIX Dry/wet signal mixer
SPREAD Widen the stereo image by phase shifting the right channel LFO. Won’t have any effect when the plugin is on a mono track.

RESIZING CONTROLS (Audiority logo menu)

Small / Default / Big Size Reduce, reset, or increase the size of the plugin interface.
Resizing Corner You can resize from the bottom right corner of the GUI
RIGHT-CLICK OPTIONS: Each one of the knobs can be locked so it won’t change its value. This is very useful when you load the plugin on an AUX/SEND channel. To lock a knob, simply RIGHT CLICK it and select LOCK PARAMETER.

CHANGELOG

v1.3 (Feb 2024)

NEW: Updated Framework
FIX: Range knob not smoothed
CHANGE: Improved Through-Zero label
CHANGE: Vintage Mode excluded from randomizer
BREAKING CHANGE: Minimum macOS version is now 10.13

v1.2 (May 2023)

NEW: Updated Framework
NEW: CLAP plugin format
NEW: AAX Native Silicon
NEW: Vintage mode

v1.1.1 (Apr 2022)

FIX: Spread value not correctly shown on GUI
FIX: Footer parameters should not be randomizable

v1.1 (Apr 2022)

NEW: Stereo Spread parameters
NEW: Through-Zero Mode

v1.0 (Apr 2022)

Original release

Audiority Srls – EULA (End-User License Agreement)
The software that accompanies this license is supplied under a license agreement. By installing this software you are agreeing to the Audiority License Agreement. If you do not agree with these terms, do not install the software. All software download purchases are non-refundable. However, if you haven’t downloaded a license file (or used a redeem code), you may obtain a refund within 14 days through the dealer where you purchased the software, or if purchased at any of Audiority’s online stores, by contacting support@audiority.com. The terms of this license agreement are as follows: By installing the software, you confirm your acceptance of the Audiority Srls End User License Agreement. This is a revocable, non-exclusive, single-user License. This End User License Agreement (“Agreement”) is between Audiority Srls and you.

IMPORTANT – PLEASE READ THIS LICENSE AGREEMENT CAREFULLY BEFORE INSTALLING THIS SOFTWARE. By using the Audiority Srls Software you accept these terms. The Audiority Srls Software may be distributed with software or components from third parties (“Third-Party Software”). Use of Third-Party Software is also subject to the terms of this EULA.

Limited Use License.
The Software is licensed, not sold, by Audiority or its Third-Party Software suppliers (“Suppliers”) to the original end-user for use only on the terms outlined in the Agreement. If and only if your Software is purchased through an Audiority Authorized Dealer or Distributor, Audiority, as Licensor, grants you, as an end-user Licensee, a non-exclusive license to use the Software (which includes computer software, updates, and any bug fixes subsequently delivered and associated media, printed materials and “online” or electronic documentation).
Title.
The Software is owned by Audiority or its Suppliers as applicable and is protected by copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. Audiority (or its Suppliers, as applicable) retains title to and ownership of the Software and all copies, as well as any rights not specifically granted. This Agreement only gives you certain rights to use the Software and related documentation, which may be revoked if you do not follow these terms.
Limited Rights to Install and Use the Software.
Permitted use and restrictions.
You may install the Software into the memory of no more than three computers for your internal business use or your enjoyment, but may not redistribute or electronically transfer the Software to someone else’s computer or operate it in a time-sharing or service bureau operation.
Reverse engineering and copying limitations.
You may make one copy of the Software for backup purposes only (and replacement backup copies in the event of loss of or damage to a backup copy), provided you include all copyright notices contained on the original media on the backup copy. You may not modify, translate, adapt, reverse engineer, decompile, create other works from, or disassemble the Software or any portions thereof (except and to the extent that applicable law expressly permits reverse engineering, decompilation, or disassembly). This includes but is not limited to, analytical captures, impulse responses, profiles, and/or machine learning training/validation/prediction.
Technical limitations.
The Software may include technological measures that are designed to prevent or detect unlicensed use of the Software. Circumvention of these technological measures is prohibited, except and only to the extent that applicable law expressly permits, despite this limitation. Any attempt to circumvent technical limitations may render the Software or certain features unusable or unstable and may prevent you from updating or upgrading the Software.
No reconfiguration.
The Software is licensed for installation and use only in the manner it was provided to you, as configured by an automated installation program provided with the Software, or as described in Audiority’s Documentation. You may not separate the components contained in the Software or otherwise reconfigure the Software to circumvent technical limitations on the use of the Software or to exceed the scope of your license.
Export and Renting Restrictions.
You may not export, convey, rent, sublicense, or otherwise distribute the Software or any rights therein to any person or entity.
Feedback.
Audiority shall have a royalty-free, worldwide, transferable, sublicensable, irrevocable, perpetual license to use or incorporate into the Software any suggestions, ideas, enhancement requests, feedback, recommendations, or other information provided by You relating to the features, functionality, or operation of the Software (“Feedback”); provided, however, that Audiority shall have no obligation to use or incorporate into the Software any Feedback, and You shall have no obligation to provide Feedback.
Registration Information.
Audiority uses named licenses for its products. When You activate the Software, Audiority may collect your name email address, and other contact information that You choose to provide (“Registration Information”). You agree to provide your real full name (or company name) to Audiority to comply with the requirements needed to generate such licenses. Audiority reserves all rights to terminate a license at any moment if the information provided is incorrect and/or fake (pseudonyms, anonymous, or fake names like “John Doe” are not allowed) without any notice. You agree that Audiority may use this Registration Information to contact You regarding your purchase and to deliver notifications relative to your use of the Software. Audiority does not collect or retain any financial information from or about You (such as payment card information).
License Transfer.
Except if otherwise stated within this EULA, the Licensee may resell the software to a third party or transfer the software permanently if the Licensee purchased the Software from any Audiority store or any Audiority Dealer. Audiority reserves all rights to deny any requests for the transfer of this license and may institute transfer fees and policies as it sees fit at the time of any request for the transfer of this license if the Licensee purchased the license from another Licensee.
By transferring a license, the third party agrees in writing with this EULA and the Licensee ceases all use of the software, completely removes all installed copies of the software from its computer, and – if the software was not purchased via download – deletes or transfers the original data storage to the third party (if Licensee is not obliged to longer storage by law). NFR (not for resale) copies, including freeware products, free bonus products, and giveaway copies, cannot be resold. Following a respective request from the Licensee via its email address registered with Audiority, and payment of the Transfer Fee, the license file of the Product will be transferred by Audiority to the third party, and at the same time, the registration of the Licensee for the software purchased will be deleted. The current and updated Transfer Fee can be found at this address https://www.audiority.com/faq/#1509113035751 -cec03c9c-5c77
Excluded Products.
Audiority and its Suppliers give NO warranty for Software free of charge, including Software designated as “demo”, “limited release,” “pre-release,” “loan,” “beta” or “test.” This Software is provided “AS IS.”
Limitation of Liability.
AUTHORITY AND ITS SUPPLIERS SHALL HAVE NO LIABILITY TO YOU WHETHER IN CONTRACT, TORT, NEGLIGENCE, OR PRODUCT LIABILITY, FOR ANY CLAIM, LOSS, OR DAMAGE, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOSS OF USE, BUSINESS INTERRUPTION, LOST DATA, OR LOST FILES, OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE SOFTWARE OR DOCUMENTATION, OR THE PERFORMANCE OR OPERATION OF THE SOFTWARE, EVEN IF AUTHORITY OR ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL AUDIORITY’S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE EXCEED THE AMOUNTS RECEIVED FROM YOU FOR YOUR LICENSE OF THE SOFTWARE.
Termination.
To the extent permitted by law, and without prejudice to any other rights Audiority may have, Audiority may terminate your license if you materially breach these terms and conditions.
11. Third-Party Software and Information.
This EULA governs any Third-Party Software distributed by Audiority. Audiority may include information about third-party products and services, including links to Web sites run by others. Audiority is not responsible for and does not endorse or sponsor, this third-party information.
Miscellaneous.
This Agreement constitutes the entire agreement between the parties concerning the use of the Software and Documentation and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No amendment to or modification of this Agreement will be binding unless in writing and signed by a duly authorized representative of Audiority.

Thank You
We wanna thank you for buying the Audiority Electric Matter plugin. We hope you will enjoy it as much as we did. If you have any questions, concerns, technical issues, or even just say ‘Hello’, get in touch with us at: info@audiority.com or check out our site at www.audiority.com Cheers, Luca

Follow us on

Official Facebook Support:
Audiority Users

Audiority User Area: (registration is required to access the UA and download installers and license files)
Audiority User Area

Join our Discord server
Audiority Discord

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>

audiority Flanger Electric Matter User Guide

audiority Flanger Electric Matter

Electric Matter

Electric Matter

FILE LOCATIONS

USER AREA AND REDEEM CODES

CHANGELOG

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

audiority User Manuals

Related Manuals