audiority VST2 Chorus Ensembler Owner’s Manual

audiority VST2 Chorus Ensembler

Product Information

The Chorus Ensembler is a BBD Analog Chorus/Vibrato simulation plugin produced by Luca Capozzi (Audiority Srls) in June 2022. It comes in AAX, AU, CLAP, VST2, and VST3 formats and is available for purchase on the Audiority website. The current manual version is v1.1.

The Chorus Ensembler features chorus intensity, vibrato rate and depth, input impedance, preamp only/effect operative modes, tempo sync, classic or full stereo modes, stereo spread, pre and post-effect gain, mix control, and a resizable interface. It also comes with a global control footer that includes a vintage mode option.

Please note that all product names used on the Audiority website are trademarks of their respective owners and are not associated or affiliated with Audiority.

System Requirements
The Chorus Ensembler plugin is compatible with both PC and Mac (Intel/Silicon) systems. It requires a DAW that supports AAX, AU, CLAP, VST2, or VST3 plugins.

Plugin Activation
If you purchased the plugin from the Audiority website, you can activate it online by logging into your user account. If you purchased it from one of Audiority’s dealers, you will need to redeem a code to activate the plugin.

To redeem a code:

1. Register for an account on the Audiority website if you don’t already have one.
2. Log in to your account and click the “User Area” section.
3. Click the “Redeem” section and paste the code you received via email from the dealer.
4. A license will be deposited into your account and will be shown in the “My Plugins” section of your User Area.

You can then download the license file or activate the plugin online.

Product Usage Instructions

The Chorus Ensembler plugin is used to add chorus and vibrato effects to audio tracks. Here are some steps to get started:

1. Open your DAW and create a new audio track.
2. Insert the Chorus Ensembler plugin onto the track.
3. Adjust the input impedance, chorus intensity, vibrato rate and depth, and pre/post-effect gains to your liking.
4. Select either the classic or full stereo mode depending on your preference.
5. Use the mix control to blend the dry and wet signals.
6. Enable tempo sync if desired.
7. Use the stereo spread control to adjust the width of the stereo image.
8. Toggle between chorus and vibrato modes using the effect mode switch.
9. Use the vintage mode option in the global control footer to add a vintage feel to your audio.

Chorus Ensembler

(AAX, AU, CLAP, VST2, VST3)
produced by Luca Capozzi (Audiority Srls), June 2022

Current Manual version: v1.1

The Chorus Ensembler is a faithful simulation of the Boss® CE-1™, a mid 70’s BBD chorus and vibrato pedal. This is the first product Roland® marketed as Boss®, becoming one of the most sought after pedals thanks to its warm and organic character. Compared to the classic version where, in stereo mode, the chorus is split between dry (left channel) and wet (right channel), our Chorus Ensembler goes further by providing a STEREO switch allowing full chorus on both channels.

Please, read carefully both product specifications and system requirements before purchasing any Audiority product.

All product names used in this website (www.audiority.com) are trademarks of their respective owners, which are in no way associated or affiliated with Audiority. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Audiority’s sound model development. BOSS, CE-1 and Roland are registered trademarks of Roland Corporation U.S.

Credits
Code & DSP: Luca Capozzi (Audiority Srls), June 2022 GUI Design: Luca Capozzi

Published by Audiority Srls
Copyright © 2022 – Audiority Srls – All rights reserved.

Specifications

• BBD Analog Chorus/Vibrato simulation
• Chorus Intensity
• Vibrato Rate and Depth
• Input Impedance
• Preamp only/Effect operative modes
• Tempo Sync
• Classic or Full Stereo modes
• Stereo Spread
• Pre and Post effect gain
• Mix control
• Resizable interface

System Requirements

PC

• Windows 7 64bit or later
• Intel i5 or equivalent
• 4 GB RAM
• Screen resolution: 1024×768
• VST2, VST3, AU, CLAP 64-bit host
• PT11 or higher, AAX 64-bit host

MAC (Intel)

• OSX 10.9 or later
• Intel i5 or equivalent
• 4GB RAM
• Screen resolution: 1024×768
• VST2, VST3, AU, CLAP 64-bit host
• PT11 or higher, AAX 64-bit host

MAC (Silicon)

• macOS 11.0 or later
• M1 or higher
• 4 GB RAM
• Screen resolution: 1024×768
• VST2, VST3, AU, CLAP 64-bit host
• PT11 or higher, AAX 64-bit host

FILE LOCATIONS

Mac

All presets, license, IR files and settings are located in:
/Users/Shared/Audiority/

AAX, CLAP and VST plugins will be placed in their own Audiority sub-folder located in:

• AAX: /Library/Application Support/Avid/Audio/Plug-Ins/Audiority
• CLAP: /Library/Audio/Plug-Ins/CLAP/Audiority
• VST: /Library/Audio/Plug-Ins/VST/Audiority
• VST3: /Library/Audio/Plug-Ins/VST3/Audiority

PC

All presets, license, IR files and settings are located to:
C:\Users\Public\Public Documents\Audiority

AAX, CLAP and VST plugins will be placed in their own Audiority sub-folder, usually located in:

• AAX: C:\Program Files\Avid\Audio\Plug-Ins\Audiority
• CLAP: {Your CLAP Path}\Audiority
• VST: {Your VST Path}\Audiority
• VST3: {Your VST3 Path}\Audiority

PLUGIN ACTIVATION

Once you install and open the plugin for the first time, it will be in Demo Mode until a license file is loaded. In Demo Mode the plugin will output 3 seconds of silence every minute.

You can activate the plugin either OFFLINE or ONLINE.

OFFLINE ACTIVATION
If you purchased the plugin from our site, you should have received an email to download the installers and the license file. Save the license file you got with your purchase email (or via our User Area) anywhere on your computer.

Then, to activate the plugin, click on the Audiority logo and select “Register”. The Registration window will pop up allowing you to load the license file you got while purchasing the plugin by clicking the “Load License” button. Alternatively, you can drag and drop the license file on the registration window.

NOTE:
If you purchased the plugin from one of our dealers, please check the “USER AREA AND REDEEM CODES” section below.

ONLINE ACTIVATION
If you are registered to our User Area, then you can activate the plugin online.

Insert your Username (or email address), your password and click the “Login” button. The license file will be automatically delivered in your computer and the plugin will be activated.

USER AREA AND REDEEM CODES

If you purchased from one of our dealers, then you should have received an email with a redeem code. This code is required to deposit a license in your User Area account and let you download the license file or activate the plugin online.
If you don’t have an User Area account yet, please follow these steps:

1. Go to https://www.audiority.com/register and fill out the signup form.
2. Once registered, log in to your account by clicking the User Area section of our site. Click the REDEEM section of your account and paste the code you received via email from our dealer.
3. After submitting the code, a license will be deposited in your account and will be shown in “MY PLUGINS” section of your User Area.
4. Now you can click “License File” and save the license anywhere on your computer and ready to be loaded through the plugin registration window. You can also skip this part and activate your plugin online (see previous section of this manual).

USER PATHS SETTING

By selecting “Settings” from the logo menu, you can change the path for Presets, License and IR folders. You can also disable our Newsfeed from here.

Note:
Please do not move the Settings folder from its default location.

Plugin Parameters

TOOLBAR
The Toolbar allows you to manage the plugin presets, register the plugin and set some global parameters. By clicking the AUDIORITY logo, in the top left corner of the Toolbar, you’ll be able to visit our website and social profiles, register the plugin, change the interface size and customize the paths for license and preset files.

The HQ button will enable oversampling, useful to reduce aliasing when the signal saturates. Use the Randomize and Reset buttons to experiment with random presets or restoring it to its saved version. Press SHIFT+DOUBLE CLICK on any knob to manually assign a new value.

PARAMETERS

• INPUT IMPEDANCE (HIGH/LOW) Sets the preamp section of the pedal. Keep it on HIGH for general use. Switch to LOW to engage a mic preamp boosting the signal by +23dB
• LEVEL CONTROL Adjusts the input signal level
• CHORUS INTENSITY Adjusts the speed and depth of the chorus modulation
• VIBRATO DEPTH Adjusts the depth of the vibrato modulation
• VIBRATO RATE Adjusts the speed of the vibrato modulation
• POWER Turns the entire effect on and off. Use this as a full bypass
• EFFECT MODE (NORMAL/EFFECT) Switch between preamp only (NORMAL) and effect modes. Use this to disable the modulation by keeping the warmth and character of the pedal
• CHORUS/VIBRATO Switch between the two effects
• LEFT LED Peak level indicator. It starts blinking when the signal saturates
• RIGHT LED In EFFECT mode, blinks according to the modulation speed. In NORMAL mode is always on.

GLOBAL CONTROLS (Footer)

• VINTAGE MODE The original hardware saturates pretty quickly, but sometimes you don’t want that. Use this to set the plugin behave like the original hardware (VINTAGE) or have a cleaner version (MILD) or a modern unsaturated version (CLEAN). NOTE FOR v1.0 USERS: The option MILD is equal to VINTAGE OFF on v1.0
• STEREO Sets the plugin as full stereo, with full chorus on both channels. Keep this off if you want to replicate the
• ORIGINAL stereo behaviour of the pedal (dry and wet split across the channels).
• SYNC Syncs the modulation speed to the host
• INPUT/OUTPUT Pre/Post effect gain
• MIX Dry/wet signal mixer
• SPREAD Widen the stereo image by shifting the BBD speed. Won’t have any effect when the plugin is on a mono track. This control shows up only if STEREO is enabled.

RESIZING CONTROLS (Audiority logo menu)

• Small/Default/Big Size Reduce, reset or increase the size of the plugin interface.
• Resizing Corner You can resize from the bottom right corner of the GUI

RIGHT-CLICK OPTIONS:
Each one of the knobs can be locked so it won’t change its value.

This is very useful when you load the plugin on an AUX/SEND channel. To lock a knob, simply RIGHT CLICK it and select LOCK PARAMETER.

CHANGELOG

v1.1 (Jan 2023)

• NEW: Updated Framework
• NEW: CLAP plugin format
• NEW: AAX Native Silicon
• NEW: Clean mode
• CHANGE: Vintage mode is now a three-way selector

v1.0 (Jun 2022)

• Original release

Audiority Srls – EULA (End-User License Agreement)
The software that accompanies this license is supplied under a license agreement. By installing this software you are agreeing to the Audiority License Agreement. If you do not agree with these terms, do not install the software. All software download purchases are non-refundable. However, if you haven’t downloaded a license file (or used a redeem code), you may obtain a refund within 14 days through the dealer where you purchased the software, or if purchased at any of Audiority online stores, by contacting [email protected].

The terms of this license agreement are as follows:

• By installing the software, you confirm your acceptance of the Audiority Srls End User License Agreement.
• This is a revocable, non-exclusive, single-user License.
• This End User License Agreement (“Agreement”) is between Audiority Srls and you.
• IMPORTANT – PLEASE READ THIS LICENSE AGREEMENT CAREFULLY BEFORE INSTALLING THIS SOFTWARE.

By using the Audiority Srls Software you accept these terms. The Audiority Srls Software may be distributed with software or components from third- parties (“Third-Party Software”). Use of Third-Party Software is also subject to the terms of this EULA.

1. Limited Use License.
   The Software is licensed, not sold, by Audiority or its Third-Party Software suppliers (“Suppliers”) to the original end user for use only on the terms set forth in the Agreement. If and only if your Software is purchased through a Audiority Authorized Dealer or Distributor, Audiority, as Licensor, grants you, as an end user Licensee, a non-exclusive license to use the Software (which includes computer software, updates and any bug fixes subsequently delivered and associated media, printed materials and “online” or electronic documentation).

2. Title.
   The Software is owned by Audiority or its Suppliers as applicable, and is protected by copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. Audiority (or its Suppliers, as applicable) retains title to and ownership of the Software and all copies, as well as any rights not specifically granted. This Agreement only gives you certain rights to use the Software and related documentation, which may be revoked if you do not follow these terms.

3. Limited Rights to Install and Use the Software.

4. Permitted use and restrictions.
   You may install the Software into the memory of no more than three computers for your internal business use or your own personal enjoyment, but may not redistribute or electronically transfer the Software to someone else’s computer or operate it in a time-sharing or service-bureau operation.

5. Reverse engineering and copying limitations.
   You may make one copy of the Software for backup purposes only (and replacement backup copies in the event of loss of or damage to a backup copy), provided you include all copyright notices contained on the original media on the backup copy. You may not modify, translate, adapt, reverse engineer, decompile, create other works from, or disassemble the Software or any portions thereof (except and to the extent that applicable law expressly permits reverse engineering, decompilation or disassembly). This includes, but it’s not limited to, analytical captures, impulse responses, profiles and/or machine learning
   training/validation/prediction.

6. Technical limitations.
   The Software may include technological measures that are designed to prevent or detect unlicensed use of the Software. Circumvention of these technological measures is prohibited, except and only to the extent that applicable law expressly permits, despite this limitation. Any attempt to circumvent technical limitations may render the Software or certain features unusable or unstable, and may prevent you from updating or upgrading the Software.

7. No reconfiguration.
   The Software is licensed for installation and use only in the manner it was provided to you, as configured by an automated installation program provided with the Software, or as described in Audiority’s Documentation. You may not separate the components contained in the Software or otherwise reconfigure the Software to circumvent technical limitations on the use of the Software or to otherwise exceed the scope of your license.

8. Export and Renting Restrictions.
   You may not export, convey, rent, sublicense, or otherwise distribute the Software or any rights therein to any person or entity.

9. Feedback.
   Audiority shall have a royalty-free, worldwide, transferable, sublicenseable, irrevocable, perpetual license to use or incorporate into the Software any suggestions, ideas, enhancement requests, feedback, recommendations or other information provided by You relating to the features, functionality or operation of the Software (“Feedback”); provided, however, that Audiority shall have no obligation to use or incorporate into the Software any Feedback, and You shall have no obligation to provide Feedback.

10. Registration Information.
    Audiority uses named licenses for its products. When You activate the Software, Audiority may collect your name and email address and other contact information that You choose to provide (“Registration Information”). You agree to provide your real full name (or company name) to Audiority in order to comply with the requirements needed to generate such licenses. Audiority reserves all rights to terminate a license in any moment if the information provided are incorrect and/or fake (pseudonyms, anonymous or fake names like “John Doe” are not allowed) without any notice. You agree that Audiority may use this Registration Information to contact You regarding your purchase and to deliver notifications relative to your use of the Software. Audiority does not collect or retain any financial information from or about You (such as payment card information).

11. License Transfer.
    Except if otherwise stated within this EULA, Licensee may resell the software to a third party or transfer the software permanently if the Licensee purchased the Software from any Audiority store or from any Audiority Dealer. Audiority reserves all rights to deny any requests for the transfer of this license, and may institute transfer fees and policies as it sees fit at the time of any request for the transfer of this license, if the Licensee purchased the license from another Licensee.
    By transferring a license, the third party agrees in writing with this EULA and Licensee ceases all use of the software, completely removes all installed copies of the software from its computer and – if the software was not purchased via download – deletes or transfers the original data storage to the third party (if Licensee is not obliged to a longer storage by law). NFR (not for resale) copies, including freeware products, free bonus products, and giveaway copies, cannot be resold. Following respective request from Licensee via its email address registered with Audiority, and payment of the Transfer Fee, the license file of the Product will be transferred by Audiority to the third party, and at the same time the registration of Licensee for the software purchased will be deleted. The current and updated
    Transfer Fee can be found at this address https://www.audiority.com/faq/#1509113035751-cec03c9c-5c77.

12. Excluded Products.
    Audiority and its Suppliers give NO warranty for Software free of charge, including Software designated as “demo”, “limited release,” “pre-release,” “loan,” “beta” or “test.” This Software is provided “AS IS.”

13. Limitation of Liability.
    AUDIORITY AND ITS SUPPLIERS SHALL HAVE NO LIABILITY TO YOU WHETHER IN CONTRACT, TORT, NEGLIGENCE OR PRODUCTS LIABILITY, FOR ANY CLAIM, LOSS, OR DAMAGE, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOSS OF USE, BUSINESS INTERRUPTION, LOST DATA, OR LOST FILES, OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE SOFTWARE OR DOCUMENTATION, OR THE PERFORMANCE OR OPERATION OF THE SOFTWARE, EVEN IF AUDIORITY OR ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL AUDIORITY’S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE EXCEED THE AMOUNTS RECEIVED FROM YOU FOR YOUR LICENSE OF THE SOFTWARE.

14. Termination.
    To the extent permitted by law, and without prejudice to any other rights Audiority may have, Audiority may terminate your license if you materially breach these terms and conditions.

15. Third-Party Software and Information.
    This EULA governs any Third-Party Software distributed by Audiority. Audiority may include information about third party products and services, including links to Web sites run by others. Audiority is not responsible for, and does not endorse or sponsor, this third-party information.

16. Miscellaneous.
    This Agreement constitutes the entire agreement between the parties with respect to the use of the Software and Documentation, and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No amendment to or modification of this Agreement will be binding unless in writing and signed by a duly authorized representative of Audiority.

Should you have any questions concerning this Agreement, please contact Audiority Srls at [email protected] Copyright ©2010-2023 Audiority Srls. All rights reserved. Last updated on Jan 25th, 2023.

Thank You
We wanna thank you for buying Audiority Chorus Ensembler plugin. We hope you will enjoy it as much as we did.

If you have any question, concerns, technical issues or even for just say ‘Hello’, get in touch with us at:
[email protected] or checkout our site at www.audiority.com
Cheers,
Luca

Follow us on:

• Facebook
• Twitter
• SoundCloud
• YouTube
• Instagram

Official Facebook Support:

Audiority U sers
Audiority User Area: (registration is required to access the UA and download installers and license files)
Audiority User Area

Copyright © 2022-2023 – Audiority Srls – All rights reserved.

References

• Stream Audiority music | Listen to songs, albums, playlists for free on SoundCloud
• Audiority - Professional Audio Plugins VST, AAX, AU, CLAP
• Audiority - Professional Audio Plugins VST, AAX, AU, CLAP
• User Area - Audiority
• FAQ - Audiority
• Register - Audiority
• Audiority Srls (@audioritysound) • Instagram photos and videos

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>