audiority Heavy Pedal mkII Metal Distortion Pedal Plugin User Manual

: June 6, 2024
: audiority

Table of Contents

Heavy Pedal mkII
Heavy Pedal mkII
Specifications
PLUGIN ACTIVATION
Plugin Parameters
CHANGELOG
Documents / Resources

Heavy Pedal mkII Metal Distortion Pedal Plugin
User Manual

Heavy Pedal mkII

(VST2, VST3, AU, AAX)
produced by Luca Capozzi (Audiority Srls), May 2019
Current Manual version: v2.0 (April 2021)
Heavy Pedal is an analog modeled simulation of the infamous BOSS® HM- 2TM, Swedish Chainsaw distortion stompbox introduced in the mid-80s and that sculpted the guitar tone of many metal guitarists.
Please, read carefully both product specifications and system requirements before purchasing any Audiority product.
All product names used in this website (www.audiority.com) are trademarks of their respective owners, which are in no way associated or affiliated with Audiority. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Audiority’s sound model development.
BOSS, HM-2 and Roland are registered trademarks of Roland Corporation U.S.

Heavy Pedal mkII

produced by Audiority, May 2019.
Credits
Code & DSP: Luca Capozzi (Audiority Srls), May 2019
GUI Design: Luca Capozzi
Published by Audiority Srls
Copyright © 2019-2021
Audiority Srls All rights reserved.

Specifications

– Independent Tone, Distortion and Level controls
– Pre and Post effect gain
– Mix control
– Noise Gate
– 9 different pedal circuits
– Resizable interface

System Requirements
PC

Windows 7 64bit or later
Intel i5 or equivalent
2 GB RAM
Screen resolution: 1024×768
VST2, VST3, AU 64-bit host
PT11 or higher, AAX 64-bit host

MAC (Intel)

OSX 10.8 or later
Intel i5 or equivalent
2 GB RAM
Screen resolution: 1024×768
VST2, VST3, AU 64-bit host
PT11 or higher, AAX 64-bit host

MAC (Silicon)

macOS 11.0 or later
M1 or higher
2 GB RAM
Screen resolution: 1024×768
VST2, VST3, AU 64-bit host
PT11 or higher, AAX 64-bit host

FILE LOCATIONS
Mac

All presets, license, IR files, and settings are located in: /Users/Shared/Audiority/
AAX and VST plugins will be placed in their own Audiority sub-folder located in:
AAX: /Library/Application Support/Avid/Audio/Plug-Ins/Audiority
VST: /Library/Audio/Plug-Ins/VST/Audiority
VST3: /Library/Audio/Plug-Ins/VST3/Audiority

PC
All presets, license, IR files, and settings are located to:
C: UsersPublicPublic DocumentsAudiority AAX and VST plugins will be placed in their own Audiority sub-folder, usually located in:
AAX: C: Program FilesAvidAudioPlug-InsAudiority
VST: {Your VST Path}Audiority
VST3: {Your VST3 Path}Audiority

PLUGIN ACTIVATION

Once you install and open the plugin for the first time, it will be in Demo Mode until a license file is loaded. In Demo Mode the plugin will output 3 seconds of silence every minute.
You can activate the plugin either OFFLINE or ONLINE.
OFFLINE ACTIVATION
If you purchased the plugin from our site, you should have received an email to download the installers and the license file. Save the license file you got with your purchase email (or via our User Area) anywhere on your computer.
Then, to activate the plugin, click on the Audiority logo and select “Register”. The Registration window will pop up allowing you to load the license file you got while purchasing the plugin by clicking the “Load License” button.
NOTE: If you purchased the plugin from one of our dealers, please check the “USER AREA AND REDEEM CODES” section below.
ONLINE ACTIVATION

If you are registered to our User Area, then you can activate the plugin online.
Insert your Username (or email address), your password, and click the “Login” button. The license file will be automatically delivered in your computer and the plugin will be activated.
USER AREA AND REDEEM CODES
If you purchased from one of our dealers, then you should have received an email with a redeem code. This code is required to deposit a license in your User Area account and let you download the license file or activate the plugin online. If you don’t have a User Area account yet, please follow these steps:

Go to https://www.audiority.com/register and fill out the signup form.
IMPORTANT: Please be sure to register with the e-mail address you use for your purchases, otherwise your products will not show. Since we use reCAPTCHA for registration only, please temporarily disable any ad blocker you are using.
Once registered, log in to your account by clicking the User Area section of our site. Click the REDEEM section of your account and paste the code you received via email from our dealer.
After submitting the code, a license will be deposited in your account and will be shown in the “MY PLUGINS” section of your User Area.
Now you can click “License File” and save the license anywhere on your computer and ready to be loaded through the plugin registration window. You can also skip this part and activate your plugin online (see the previous section of this manual).

USER PATHS SETTING
By selecting “Settings” from the logo menu, you can change the path for Presets, License, and IR folders. You can also disable our Newsfeed from here.
Note: Please do not move the Settings folder from its default location.

Plugin Parameters

TOOLBAR The Toolbar allows you to manage the plugin presets, register the plugin and set some global parameters. By clicking the AUDIORITY logo, in the top left corner of the Toolbar, you’ll be able to visit our website and social profiles, register the plugin, change the interface size and customize the paths for license and preset files. The HQ button will enable oversampling, useful to reduce aliasing when the signal saturates. Use the Randomize and Reset buttons to experiment with random presets or restore it to its saved version.

PARAMETERS

LEVEL
L (COLOR MIX)
H (COLOR MIX)
DIST| Controls the output volume of the pedal.
Post distortion active low-end tone control stage. Set it to a minimum to cut the bass of the sound and to the max to boost around 85Hz.
Post distortion active high-end tone control stage. Set it to a minimum to cut the highs of the sound and to the max to boost them.
Sets the distortion amount. Set it to the minimum to get some light dirt to use the pedal as a booster, or to the max for a fully distorted tone.
---|---

GLOBAL CONTROLS (bottom right)

TYPE
GATE
IN
OUT
MIX| Switch between different circuit models. Check the next paragraph for more details.
Noise gate threshold.
Pre-effect gain.
Post effect gain.
Dry/wet signal mixer.
---|---

RESIZING CONTROLS (Audiority logo menu)

Small Size
Default Size
Big Size
Resizing Corner| Reduce the size of the plugin interface.
Resets the plugin interface to its original size.
Increase the size of the plugin interface.
You can resize from the bottom right corner of the GUI
---|---

Circuit Types (MODS)
We implemented different versions of the pedal circuit, each one with different tonal characteristics. Below you’ll find a description of the circuit type, along with a spectrum of the original pedal (RED) and the simulated circuit (BLUE).
DEFAULT Our first circuit version follows the original schematic including some measurements done to the hardware. 808 MOD
A brighter version of the circuit with less distortion. We removed D3, D4 and D5 from the first distortion stage and replaced D8 and D9 with a couple of MA150 diodes.
MIJ Japan
A closer perceptive approach to the hardware pedal. We further tuned the component values to get better EQ shapes, coupled with an impulse response of the hardware on steady-state (with both EQ knobs at noon). SWEDE!
There’s only ONE set! This version of the circuit locks the EQ to its highest values while applying an impulse response of the hardware pedal with EQ knobs fully clockwise.
WAMPLER
Mod is based on Brian Wampler’s book “How to Modify Guitar Pedals”. Brighter than the original pedal circuit, with removed D4 and D5 diodes. D3, D8 and D9 has been replaced with a 1N4001 and two 1N34A respectively. ZED
This version of the circuit features different EQ configurations to get a warmer and a bit scooper tone compared to the Default circuit. Diodes D4 and D5 has been removed while D3, D8, and D9 have been replaced with 1N4001 and two 1N4148 respectively.
mkII New Mods
FILTH Custom modification based on the MIJ Japan, with increased bias and saturation on the gain stages. Diodes D3 and D$ has been replaced with DA90 germanium diodes, while D8-D9 has been replaced with a 1N4001 and two DA90. FX-56
This mod has been based on a DOD FX-56B. Less scooped than the original HM2 and diodes used are 1N4148. SMM-1 This mod is based on the Arion SMM-1, which is very close to the original HM2. D8 and D9 has been replaced with DA90 diodes.
TIPS To get the best results, place this plugin BEFORE your amp simulator! Use it as a booster by setting DIST to a minimum and using LEVEL to control the outgoing signal volume. Some artists place another distortion before this one, to retain its characteristic EQ while having a different saturation.

CHANGELOG

v2.0 (April 2021)

NEW: Updated Framework
NEW: Universal 2 Binary for Apple Silicon Macs
NEW: Revamped GUI
NEW: Corner Resizer (bottom right corner of the UI)
NEW: New circuit models
FIX: Silence triggered randomly in some configurations
FIX: Footer labels now show parameter values when using the mouse wheel
CHANGE: HQ is now global (per session)
BREAKING CHANGE: Improved non-linear models
BREAKING CHANGE: New Noise Gate

v1.1 (November 2019)

NEW: Mac OSX Catalina support
NEW: Notifications system
FIX Edit command visible to end-user
FIX Wrong VST3 category

v1.0.1 (May 2019) 

FIX: crash when enabling HQ with some circuit types
FIX volume loss when switching to HQ
UPD: Performance improvements

v1.0 (May 2019) 
Original release
Audiority Srls EULA (End-User License Agreement)
The software that accompanies this license is supplied under a license agreement. By installing this software you are agreeing to the Audiority License Agreement. If you do not agree with these terms, do not install the software. You may obtain a refund within 14 days through the dealer where you purchased the software, or if purchased at any of Audiority’s online stores, by contacting info@audiority.com.
The terms of this license agreement are as follows:
By installing the software, you confirm your acceptance of the Audiority Srls End User License Agreement. This is a non-exclusive, single-user License.
This End User License Agreement (“Agreement”) is between Audiority Srls and you. IMPORTANT PLEASE READ THIS LICENSE AGREEMENT CAREFULLY BEFORE INSTALLING THIS SOFTWARE.
By using the Audiority Srls Software you accept these terms. The Audiority Srls Software may be distributed with software or components from third parties (“Third-Party Software”). Use of Third-Party Software is also subject to the terms of this EULA.

Limited Use License.
The Software is licensed, not sold, by Audiority or its Third-Party Software suppliers (“Suppliers”) to the original end-user for use only on the terms set forth in the Agreement. If and only if your Software is purchased through an Audiority Authorized Dealer or Distributor, Audiority, as Licensor, grants you, as an end-user Licensee, a non-exclusive license to use the Software (which includes computer software, updates, and any bug fixes subsequently delivered and associated media, printed materials and “online” or electronic documentation).
Title.
The Software is owned by Audiority or its Suppliers as applicable and is protected by copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. Audiority (or its Suppliers, as applicable) retains title to and ownership of the Software and all copies, as well as any rights not specifically granted. This Agreement only gives you certain rights to use the Software and related documentation, which may be revoked if you do not follow these terms.
Limited Rights to Install and Use the Software.
(i) Permitted use and restrictions. You may install the Software into the memory of no more than three computers for your internal business use or your own personal enjoyment but may not redistribute or electronically transfer the Software to someone else’s computer or operate it in a time-sharing or service-bureau operation.
(ii) Reverse engineering and copying limitations. You may make one copy of the Software for backup purposes only (and replacement backup copies in the event of loss of or damage to a backup copy), provided you include all copyright notices contained on the original media on the backup copy. You may not modify, translate, adapt, reverse engineer, decompile, create other works from, or disassemble the Software or any portions thereof (except and to the extent that applicable law expressly permits reverse engineering, decompilation or disassembly).
(iii) Technical limitations. The Software may include technological measures that are designed to prevent or detect unlicensed use of the Software. Circumvention of these technological measures is prohibited, except and only to the extent that applicable law expressly permits, despite this limitation. Any attempt to circumvent technical limitations may render the Software or certain features unusable or unstable and may prevent you from updating or upgrading the Software.
(iv) No reconfiguration. The Software is licensed for installation and uses only in the manner it was provided to you, as configured by an automated installation program provided with the Software, or as described in Audiority’s Documentation. You may not separate the components contained in the Software or otherwise reconfigure the Software to circumvent technical limitations on the use of the Software or to otherwise exceed the scope of your license.
Export and Renting Restrictions.
You may not export, convey, rent, sublicense, or otherwise distribute the Software or any rights therein to any person or entity.
License Transfer.
Except if otherwise stated within this EULA, Licensee may resell the software to a third party or transfer the software permanently if the Licensee purchased the Software from any Audiority store or from any Audiority Dealer. Audiority reserves all rights to deny any requests for the transfer of this license, and may institute transfer fees and policies as it sees fit at the time of any request for the transfer of this license if the Licensee purchased the license from another Licensee. By transfering a license, the third party agrees in writing with this EULA and Licensee ceases all use of the software, completely removes all installed copies of the software from its computer and if the software was not purchased via download deletes or transfers the original data storage to the third party (if Licensee is not obliged to a longer storage by law). NFR (not for resale) copies, including freeware products, free bonus products, and giveaway copies, cannot be resold. Following the respective request from Licensee via its email address registered with Audiority, and payment of the Transfer Fee, the license file of the Product will be transferred by Audiority to the third party, and at the same time, the registration of Licensee for the software purchased will be deleted. The current and updated Transfer Fee can be found at this address https://www.audiority.com/faq/#1509113035751-cec03c9c-5c77
Excluded Products. Audiority and its Suppliers give NO warranty for Software free of charge, including Software designated as “demo”, “limited release,” “pre-release,” “loan,” “beta” or “test.” This Software is provided “AS IS.”
Limitation of Liability.
AUDIORITY AND ITS SUPPLIERS SHALL HAVE NO LIABILITY TO YOU WHETHER IN CONTRACT, TORT, NEGLIGENCE OR PRODUCTS LIABILITY, FOR ANY CLAIM, LOSS, OR DAMAGE, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOSS OF USE, BUSINESS INTERRUPTION, LOST DATA, OR LOST FILES, OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE SOFTWARE OR DOCUMENTATION, OR THE PERFORMANCE OR OPERATION OF THE SOFTWARE, EVEN IF AUTHORITY OR ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL AUTHORITY’S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE EXCEED THE AMOUNT PAID BY YOU FOR THE SOFTWARE.
Termination.
To the extent permitted by law, and without prejudice to any other rights Audiority may have, Audiority may terminate your license if you materially breach these terms and conditions
Third-Party Software and Information.
This EULA governs any Third-Party Software distributed by Audiority. Audiority may include information about third-party products and services, including links to Web sites run by others. Audiority is not responsible for and does not endorse or sponsor, this third-party information.
Miscellaneous.
This Agreement constitutes the entire agreement between the parties with respect to the use of the Software and Documentation and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No amendment to or modification of this Agreement will be binding unless in writing and signed by a duly authorized representative of Audiority.
Should you have any questions concerning this Agreement, please contact Audiority Srls at info@audiority.com
Copyright ©2010-2021 Audiority Srls. All rights reserved.
Last updated on August 1, 2018

Thank You
We wanna thank you for buying the Audiority Heavy Pedal mkII plugin.
We hope you will enjoy it as much as we did.
If you have any questions, concerns, technical issues or even for just say ‘Hello’, get in touch with us at: info@audiority.com or check out our site at www.audiority.com Cheers, Luca Follow us on Facebook Twitter SoundCloud YouTube Instagram Official
Facebook Support: Audiority Audiophiles Audiority User Area: (registration is required to access the UA and download installers and license files)
Audiority User Area

Documents / Resources

| audiority Heavy Pedal mkII Metal Distortion Pedal Plugin [pdf] User Manual
Heavy Pedal mkII, Metal Distortion Pedal Plugin, Heavy Pedal mkII Metal Distortion Pedal Plugin
---|---