MOCEMTRY CN-C08A Airflow Styler User Manual
- August 6, 2024
- MOCEMTRY
Table of Contents
MOCEMTRY CN-C08A Airflow Styler
Product Specifications
- Temperature Settings: 280°F to 430°F
- Heating Time: 50 seconds
- Curling Method: Top to end of hair
- Fan Function: Cooling fan for curling
- Noise Level: Mild noise from cooling fan
- Power: Long press to power on/off
Product Usage Instructions
Curling Your Hair
- Set your desired temperature and wait until the light stops flashing.
- Turn on the cooling fan by quick pressing the button.
- Open the plates and insert a small section of hair.
- Glide from the top of your hair to the ends at a slow consistent pace.
- Repeat the process until you achieve your desired curls.
Tips for Longer Lasting Curls
- Prep your hair by ensuring it is completely dry and not conditioned.
- Section small parts of hair for proper heating.
- Curl hair at a slow pace for tight curls.
- Allow curls to cool before releasing them.
- Use hairspray or styling products for a longer hold.
- Avoid brushing out curls for a natural look.
Temperature Adjustment
There are 5 temperature settings ranging from 280°F to 430°F. Refer to the provided picture to select your desired temperature.
Troubleshooting
- If you experience a burning smell, ensure your hair is not too close to the plates.
- If the device doesn’t seem hot enough, check if it is powered on and at the desired temperature.
- If the device is noisy, it is normal due to the cooling fan operation. Contact us for any unusual noises.
- If you feel there is not enough airflow, ensure the device is powered on and operating correctly.
Frequently Asked Questions
Q: How do I know the device’s status based on the lights?
A: Blinking white light indicates power off. Steady white light indicates power on. Blue light on indicates cooling fan on. Blue light off indicates cooling fan off. Blinking temperature light indicates heating up. Steady temperature light indicates temperature ready.
Troubleshooting
We hope this guide will help you. If you have further quesons, please don’t
hesitate to contact us. Our 24/7 customer service team will always be there
for you. Customer service via email: duanqingmei2021@163.com
I can’t get it to curl my hair.
The airflow styler works from the top to the end of you hair, unlike a
tradional curling iron that works upward. Please follow the instrucons to
ensure successful curling result 1. Set your personalized temperature and wait
ll the light stops flashing. 2. Turn on the cooling fan.
Quick press to adjust temperature Quick press to turn on cooling fan
Long press to power on
3. Open the plates and insert a small secon of hair.
4. Hold the curler vercally and rotate 180°
5.Glide from hair top to hair ends, maintain a slow consistent pace while you
work downward to the ends.
6. Repeat the process unl you achieve your desired look.
It doesn’t hold curls.
A cool airflow styler is supposed to hold curls longer than a regular curling
iron. However, fine straight hair are naturally more difficult to hold curls
than coarse hair whether you go for temporary curling or perms. If you have
fine so straight hair, here are some ps for longer hold:
1. PREP YOUR HAIR
Keep your hair completely dry and not condioned before curling and avoid humid
bathroom. Curls hold the best with day-old hair.
2. SECTION SMALL
Take small secons of hair(1-2 inch wide) in plates so they can be properly
heated.
3. CURL HAIR AT A SLOW PACE
Twist the iron and glide hair from roots to ends. Maintain a slow pace for ght
curls.
4. ALLOW LOCKS TO COOL
Hold the curl in palm or pin it in place before it has fully cooled. Do not
shake it out while it’s hot.
5. OPT FOR A HAIRSPRAY
Apply hairspray or a styling product with firm hold to make curls last for a
long me.
6. SHAKE YOUR NATURAL LOOK
Run your fingers through curls for a tousled and voluminous effect. Don’t
brush them out.
I don’t know which temperature I’m at.
There are 5 temperature sengs ranging from 280 to 430. Please refer to the
following picture and find your suitable temperature seng
My hair smells like burned./ It fries my hair.
1. Please choose the suitable temp seng for your personal hair type. Choose a
lower seng if you have thin, fine or bleached hair to avoid overheang, and
choose a higher seng if you have thick, curly or dark hair to ensure effecve
styling. 2. Do not heat the same hair strand for too long. Do not repeat
straightening or curling the same hair strand more than 3 mes. Overexposing
hair to excessive heat will dehydrate your hair and cause damage. 3. The cool
airflow, ionic technology and tourmaline ceramic plates provide triple
protecon to your hair. But you can always apply heat protectant spray on your
hair before styling to provide extra protecon.
It doesn’t get hot enough.
Please note that the barrel will not get hot so you can touch it for safe
styling. The plates will heat up and create the curl, not the barrel. It’s
noisy when I turn on the device.
When the temperature reaches your chosen heat level, the cooling fan will turn
on automacally and create some mild noise. The cooling fan only works for
curling, not straightening. You can turn it off if it’s not necessary.
However, if you hear a squeaky noise, please contact us for replacement or
refund.
There’s not a lot of air.
The device heats up in 50s. If you don’t find it heang up, please check if you
have switched on power, or if you have accidentally powered it off. Press the
power buon for 2-3 seconds to power on the device.
Blinking white light indicates power off. Steady white light indicates power
on. Blue light on indicates cooling fan on. Blue light off indicates cooling
fan off. Blinking temperature light indicates heang up. Steady temperature
light indicates temperature ready.
Temperature Indicator Cooling Fan Indicator
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>