DREO DR-HTF002S Smart Tower Fan User Manual
- June 17, 2024
- DREO
Table of Contents
- DREO DR-HTF002S Smart Tower Fan
- IMPORTANT SAFETY INSTRUCTIONS
- ASSEMBLING YOUR TOWER FAN
- Package Contents
- CONNECTING TO YOUR TOWERFAN
- KNOWING YOUR TOWERFAN
- Additional Features
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- DREO CUSTOMER CARE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DREO DR-HTF002S Smart Tower Fan
Your support means the world to us. We hope you enjoy our product as much as we did creating it.
EXTEND YOUR WARRANTY FOR FREE
Visit dreo.com/warranty to extend your warranty
for free by registering your product. If you have any product issues, we
always stand ready to help.
IMPORTANT SAFETY INSTRUCTIONS
General Safety
- The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a sale way and understand the hazards involved Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
- Use the appliance as described In the user manual only. Any other use not recommended In the user manual may cause fire, electrical shock, or personal Injury. Ensure that the fan Is switched off from the supply mains before removing the guard.
- This appliance is not intended for use by persons [including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructon concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Operation Safety
- Place the appliance on a flat, dry surface before use.
- Do not immerse in water and any other liquids.
- Do not use the appliance until the base is installed.
- Do not insert your fingers, pencil and any other objects into the grilles while in operation.
- Do not dismantle, repair, or modify. All servicing should be performed by qualified personnel.
Electricity Safety
- Make sure that the voltage of your electricity supply ls the same as that indicated on the appliance.
- Always unplug before cleaning or leaving the appliance unused for a long period. Keep your hands dry when plugging. plugging.
- Do not operate any fan with a damaged cord or plug. Discard the fan or return it to an authorized service facility for examination and/or repair.
- Do not run cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange cord away from the traffic area and where it will not be tripped over.
- WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- WARNING – If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS
Gentle Reminder
Specifications
ASSEMBLING YOUR TOWER FAN
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach
the parts by following the steps below.
Package Contents
CONNECTING TO YOUR TOWERFAN
Before connecting the appliance to your mobile device, please scan the QR code on the left or go to the app store and search “Oreo”, then select and download the app.
You can use the Oreo app to connect your Smart Tower fan to Amazon Alexa or Google Home. Please follow’ the in-app instructions to set up your voice assistant
NOTE: You must create an Oreo account to access voice assistants.
-
Launch Oreo and sign in or create an account by following in-app instructions.
-
Enable Bluetooth on your mobile device and plug in your tower fan.
-
Tap + Add Device and select the tower fan you want to link.
-
Hold the Oscillation button for 5 seconds to start WiFi connection settings.
(Tip: The WiFi icon ‘ ‘ will keep flashing when pairing.) -
Follow in-app i nstructions to complete Wi-Fi connections.
-
You’re now ready to control the appliance on your app. (Tip: To restart connection settings, hold the Oscillati on button again for 5 seconds.)
KNOWING YOUR TOWERFAN
Control Panel
LED Display
General Operations
Working Modes
Sleep Mode (Mute Auto On}
Fan speed decreases every 30 minutes .. Speed decreases by two levels at most
and will remain constant if at level 1:
- For level 6: 6 -5-4
- For level 5: 5 -4-3
- For level 4: 4 -.3-2
- For level 3: 3 -2-1
- For level 2: 2 -1
- For level 1: 1
Additional Features
Getting the Most out of Your Tower Fan
- Remove any tall obstacles that might block the airflow from the fan.
- Combine with your AC unit to get cooler air throughout the room.
- Position the tower fan closer to you to get more direct airflow.
- Place a bucket of ice in front of the fan for an extra cooling boost.
Note: When the fan is on standby, long press the Mode button and Fan Speed button 10s to turn off the WiFi connection and enter Low Power Standby Mode.
Remote Control
Battery Replacement
- Press the locking button to pop out the battery holder.
- Replace with the same battery type with the(+) side facing up.
- Push in the holder until securely locked into place.
Note: If the indicator on the remote control doesn’t turn on anymore, please consider replacing the battery.
WARNING
Chemical Burn Hazard Keep batteries away from children. This product contains
a lithium button/coin cell battery. If a new or used lithium button/coin cell
battery is swallowed or enters the body, it can cause severe internal burns
and can lead to death in as little as 2 hours. Always completely secure the
battery compartment. If the battery compartment does not close securely, stop
using the product, remove the battery, and keep it away from children. If you
think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention. The batteries must be disposed of
properly, including keeping them away from children. Even used cells may cause
injury.
CLEANING AND MAINTENANCE
Outer Surface
Gently wipe off the dust with a soft, dry cloth.
Grilles & Blades
Remove the dust using a vacuum or air duster.
Base
The base can be disassembled in the reverse order of assembly.
CAUTION
- Always unplug the fan before any cleaning or maintenance.
- Do not immerse in water or get water inside the motor housing.
- Do not use any chemical agents when cleaning the fan.
- Store in a cool, dry place and cover it to protect from dust.
TROUBLESHOOTING
My fan won’t turn on!
Make sure that the cord is connected to a powered outlet and the mains voltage
corresponds with the voltage indicated on the fan.
My fan is shaky and wobbling!
- Place the fan on a flat, level surface.
- Incorrect installation might also cause shakiness. Please refer to the assembly instructions on.
Note that the power cord must be run through all rear keepers.
My fan is making vibration and noise!
- Place the fan on a flat, level surface.
- Be sure not to insert anything into the air inlet and outlet.
If your problem is not listed or still persists, please contact our Customer Support.
- Correct Disposal of this product
This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources To return your used device, please use the return and collection system or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
DREO CUSTOMER CARE
Default 24-Month Warranty
This appliance is covered by an Oreo warranty for 24 months from the date of its original purchase.
Extend Your Warranty
Extend your warranty by registering your new appliance on our website
https://dreo.com/warranty.
The warranty will not apply in cases of:
- Accidents, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purposes.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by OREO. We can only provide after-sales service for products that are sold by OREO or OREO-authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
We’re Here to Help!
- eu-support@dreo.com
- www.dreo.com
- 1=1, Shenzhen Hesung Innovation Technology Co., LTD 26F, Bldg A7, Creative City, Shenzhen, China
- www.dreo.com
DR-HTF002S
Looking for help?
Contact us to get expert support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>