sbc S226800018 Levo Gen 2 Motor Battery Cable User Guide
- June 13, 2024
- SBC
Table of Contents
sbc S226800018 Levo Gen 2 Motor Battery Cable
Product Information
- Product Name : Levo Gen 2 Motor Battery Cable
- Part Number : S226800018
- Contents of Service Part Kit : ELE WIRING, LEVO (GEN.2), MOTOR-BATTERY HARNESS, 150MM
- Replaces : Part S206800004 – ELE WIRING, LEVO (GEN.2), MOTOR-BATTERY HARNESS, 220MM LENGTH, W/O COVER
Product Usage Instructions
This product is intended for professional bicycle mechanics. If you need assistance or are unsure about any of the steps required to complete the installation, it is recommended to contact Specialized Rider Care or visit your local Specialized Authorized Retailer.
- Step 1: Ensure that you have the correct service part kit, which includes the Levo Gen 2 Motor Battery Cable with a length of 150mm.
- Step 2: Follow the motor port diagram provided in the user manual to identify the specific motor ports and their corresponding components.
- Step 3: Connect the Levo Gen 2 Motor Battery Cable to the appropriate motor port. Make sure the connection is secure.
- Step 4: If there are any unused motor ports, seal them with the blind plug provided. The blind plug does not have pins and is specifically designed for this purpose.
- Step 5: Install the speed sensor and rear light components as indicated by the user manual. Use the specified torque values for tightening the screws.
- Step 6: Install the front light and display (HMI) components following the instructions provided in the user manual.
Note: It is important to periodically check for updates and addendums to the user manual. Visit www.specialized.com or contact Rider Care to ensure you have the latest version of the manual.
Important: Always refer to the user manual and follow the manufacturer’s instructions for proper installation and usage of the Levo Gen 2 Motor Battery Cable.
PART
MOTOR PORT DIAGRAM
SERVICE PART KIT CONTENTS
| Part | Description | Spec | Torque |
|---|---|---|---|
| S2268000018 | ELE WIRING, LEVO (GEN.2), MOTOR-BATTERY HARNESS, 150MM | N/A | N/A |
WARNING! This Service Part Guide is intended for professional bicycle
mechanics. All assembly of Service parts should be carried out by an
Authorised Specialized Retailer.
If you are unsure about any of the steps required to complete the
installation, contact Specialized Rider Care or visit your local Specialized
Authorized Retailer.
VERSIONS
This part replaces part
S206800004 – ELE WIRING, LEVO (GEN.2), MOTOR-BATTERY HARNESS, 220MM LENGTH,
W/O COVER
SPECIALIZED BICYCLE COMPONENTS 15130 Concord Circle, Morgan Hill, CA
95037 408-779-6229 0000199310_SPG_R1
08/23
We may occasionally issue updates and addendums to this document. Please
periodically check www.specialized.com or
contact Rider Care to make sure you have the latest version.
SPECIALIZED BICYCLE COMPONENTS
- 15130 Concord Circle, Morgan Hill, CA 95037 408-779-6229
- 0000199310 SPG R1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>