YUHAO ST1 Smart Watch User Manual
- August 3, 2024
- YUHAO
Table of Contents
YUHAO ST1 Smart Watch
Specifications:
- Model: NGXMOTM
- Features: Touchscreen, Heart Rate Monitor, Activity Tracker
- Compatibility: iOS and Android
- Water Resistance: Yes
- Battery Life: Up to 2 days
Product Usage Instructions
Charging:
To charge the smartwatch, connect the provided charging cable to the watch and
a power source. Make sure the contacts are aligned correctly.
Power On/Off:
To power on the smartwatch, press and hold the side button until the logo
appears. To power off, press and hold the side button and follow on-screen
prompts.
Syncing with Smartphone:
Download and install the companion app on your smartphone.
Follow the app instructions to pair the smartwatch via Bluetooth for
notifications and data sync.
Using Features:
Swipe on the touchscreen to navigate menus. Use the touch gestures or buttons
to access features like heart rate monitoring, activity tracking,
notifications, and more.
Charging
- Please align the magnetic attraction wire with the metal plate of the bottom case, and the magnet will automatically attract and charge the positive and negative poles.
- Please ensure that the charging contacts are free of dirt and impurities. If they are wiped clean, otherwise they cannot be charged.
- Insert USB into a 5V500MA adapter, and it will be fully charged in 2-3 hours.
Mobile client download
Scan the QR code below to download and install the mobile client
- Smart watch boot: charge or press and hold the smart watch side button for 3 seconds to boot.
- Install the APP: scan the QR code on the right side of the phone, or download and install the ‘GloryFit APP in Apple App Store, Google App Store and App Store.
Important: Watch connection instructions
Note: As shown in the above figure, if the connection is unsuccessful. 1. You can restart the watch, or return Glory Fit and reconnect (you can also disassemble, download, and install Glory Fit again). 2. If there is no prompt in Figure 3,open the control interface on the watch end, click on the phone icon to turn blue, and then bind it again.
Function Introduction
Full touch: slide down to enter the control center, slide up to view information notifications, slide left to access shortcut functions, slide right to enter the main menu interface, hold down the main screen for 3 seconds to switch the dial mode
Key: Short press to turn off/on screen function, long press to turn on/off. Short press to return to the dial on the menu interface.
Devices that support Android 5.0, iOS 9.0 and above Bluetooth 4.0. Android 6.0 and above devices turn on GPS to use.
Core function: Strong flashlight
Flashlight
After the watch face interface is pulled down,click the flashlight icon, the
icon is blue for the ON state, and gray for the off
Basic functions
Control Center
- Function overview: There are two pages in total, which can be viewed by swiping left and right
Call function
- Contacts: You can sync your phone’s contacts to contacts in the background (up to 100 people)
Dial pad: Dial the phone number normally to make outgoing calls (this function requires audio Wireless function to connect normally)
Sound and vibration
Vibration intensity setting, media audio switch (only sound from watch music
playback when turned on), mute switch
Daily activity data
Display the number of steps, distance, calories recorded on the day, and the
step data of the last seven days (swipe up on the interface to see)
heart rate
24-hour heart rate data and 7-day heart rate data can be displayed (you can
see it by swiping up the interface) heart rate data (can be seen by swiping on
the interface)
sleep
Sleep monitoring period: 20:00-12:00 (no longer recorded after waking up at
6:00)
motion
Sport mode options: There are more than a hundred available
frequently asked question
The watch won’t turn on
- Please press and hold the power button for more than 3 seconds
- The watch will automatically turn on after a long charging time.
The watch does not charge
- You can replace the charging head for testing, or plug in the computer USB for testing
- When the battery is seriously depleted, you need to charge it for 10-40 minutes and then press the power button to see if it is turned on and charged
Wireless is not connected or cannot be connected
- Please try to restart the watch/APP and reconnect it
- Please try to restart your phone or connect it again after Wireless on your phone
- Do not connect your phone to other Wireless devices at the same time
There is no notification information on the watch
- APP the relevant program information in the message reminder is enabled
- Message reminders are enabled in the relevant program settings
- The drop-down notification menu on the mobile phone needs to be turned on For more frequently asked questions, please check the App [My > FAQ]
Notes:
- The rated input voltage and current of this device is 5V1A,it is strictly forbidden to use chargers above 5V (9V12V, etc.),if you use the charger of the above specifications, the smartwatch will have a charging failure, please note.
- This product is an electronic consumer monitoring product, non-medical, and the measurement data is for reference only.
- No vibration is normal when the power is low, and the vibration returns to normal when it is fully charged.
Turn on the flashlight to find the laser pen and currency verification light
Please note that,
This product is equipped with 365m ultraviolet light Avoid prolonged direct
light contact with eyes and skin This product has laser function, Banned
directeyes Children cannot try it ou
This product comes with a laser pen function
MAX OUTPUT POWER<1000mv
WAVELENGTH 650nm$ 10
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.
Frequently Asked Questions (FAQ):
Q: How do I reset my smartwatch?
A: To reset the smartwatch, go to Settings > System > Reset. Follow the
on-screen prompts to reset the device to factory settings.
Q: Is the smartwatch waterproof?
A: Yes, the smartwatch is water-resistant. However, it is not recommended
for swimming or diving.
Q: How do I change the watch face?
A: In the settings or watch face menu on the smartwatch, you can select
and customize different watch faces according to your preference.