Smartlife YT60245 Weather Station Instructions

YT60245 Weather Station

Specifications:

• Model Number: YT60245
• Main Features:
  • Outdoor temperature/humidity reading, weather index
  • Wind direction & speed
  • Indoor temperature/humidity reading
  • Weather forecast
  • Time & date, moon phase, weekday
  • Light intensity
  • UV index
  • Rain
  • Barometer

Product Usage:

Setting Up the Display Console:

1. Powering Up the Display Console

   • Plug the power adapter into the power jack located at the back
     of the display console.

   • Insert 3 new AAA alkaline batteries (not included) for
     backup.

2. Pairing the Wireless 7-in-1 Sensor

   • When the display console is turned on, it will automatically
     enter pairing mode.

   • If the connection fails, refer to the re-pairing sensor
     section.

   • Once paired, outdoor temperature/humidity, wind speed, wind
     direction, UV index, light intensity, and rainfall readings will be
     displayed.

3. Re-pairing Sensor

   • If connection fails or the display console is reset, press and
     hold the 17CHANNEL button for over 2 seconds to re-enter pairing
     mode.

4. Wi-Fi Connection Status

   • The Wi-Fi signal on the LCD display indicates the connection
     status to your Wi-Fi router.

   • Flashing icon: attempting to connect; Solid icon:
     connected.

5. Time Server Connection Status

   • After internet connection, display console will connect to the
     time server to obtain UTC time.

   • Change time zone in CLOCK settings to display correct local
     time.

Operating Instructions:

Clock

1. Setting the Clock

   • In Normal time display, press and hold 10SET for over 2 seconds
     to enter time setting mode.

   • Use buttons 13WIND/+ and 14BARO/-/ to adjust values.

   • Hold buttons 13WIND/+ and 14BARO/-/ for over 2 seconds to
     adjust values rapidly.

FAQ:

Q: How do I change the batteries in the display console?

A: To change the batteries, open the battery compartment at the
back of the display console and replace with 3 new AAA alkaline
batteries.

Q: What should I do if the Wi-Fi connection signal is not

stable?

A: Ensure that the display console is within range of your Wi-Fi
router. Try restarting your router and re-establishing the
connection on the console.

Model number: YT60245 Main Features:

Outdoor temperature/humidity reading, weather index Wind direcon & speed Indoor temperature/humidity reading Weather forecast Time & date, moon phase, Weekday Light intensity UV index Rain Barometer
SETTING UP THE DISPLAY CONSOLE

POWERING UP THE DISPLAY CONSOLE

Plug the power adapter into the power jack located in the back of the display console. Insert 3 new AAA alkaline batteries (not included) for backup.
Once the display console is turned on, it will automatically enter pairing mode.

PAIRING THE WIRELESS 7-IN-1 SENSOR

Once your display console powers on, it should automatically search for and connect to

the wireless sensors. If the display console does not connect within the first 5 minutes,

refer to the following section, “RE-PAIRING SENSOR”.

You will see the icon

of an antenna scrolling in the temperature and humidity

(outdoor) section of the display.

Once the pairing process completes, the antenna icon will appear solid (not flashing),

and the readings for outdoor temperature and humidity, wind speed, wind direction, UV,

light intensity, and rainfall will appear in their designated sections of the LCD display.

RE-PAIRING SENSOR
If the connection fails or the display console is reset, then press and hold the 17CHANNELbutton over 2 seconds to enter pairing mode, and the display console will re-register all the sensors that have already been registered to it before, (i.e. the display console will not lose the connection of the sensors that you’d paired up before.)

5VSOPOZPVSTNBSUQIPOFnT#MVFUPPUIBOE8J’J 0QFOUIFo 4NBSUMJGF”11 pBOEMPHJOZPVSSFHJTUFSFEBDDPVOU ‘PSUIFEJTQMBZDPOTPMF
1SFTTBOEIPME} #”30 ~CVUUPOPWFSTFDPOET
UIF-$% EJTQMBZPGUIFDPOTPMFXJMMTIPXUIFMFUUFSo “1pUIBUJUIBTFOUFSFEJOUPUIFQBJSJOH NPEF”UUIJTUJNFJUXJMMCFSFBEZGPSUIF8J’JTFUUJOHTUPCFBEKVTUFE *OTJEFUIFEFWJDFMJTUTQBHFPG4NBSUMJGF”QQ
UBQo “EEEFWJDF pPSopUPBEEUIF QBJSUIFOFXEFWJDF
JUXJMMTDBOBVUPNBUJDBMMZ

WI-FI CONNECTION STATUS
When the display console successfully connects to your Wi-Fi router, the Wi-Fi signal will appear on the LCD display. If the Wi-Fi signal is not stable or the display console is trying to connect to the router, the icon will flash. If the icon disappeared, it means the display console is not connected to the Wi-Fi router.

Flashing: the display console is attempting to connect to your wireless router

Solid: the display console has been connected to your wireless router.

TIME SERVER CONNECTION STATUS
After the display console has connected to the internet, it will attempt to connect to the internet time server to obtain the UTC time. Once the connection succeeds and the display console’s time has updated. The icon “SYNC” will appear on the LCD.
To display the correct time for your specific time zone, you will need to change the time zone in the CLOCK setting mode from 00 to your time zone (eg.GMT+1). If you don’t know your time zone, you can look it up online.

OPERATING INSTRUCTIONS
CLOCK

Setting the Clock

In Normal time display, press and hold 10SETover 2 seconds to enter time setting mode.

Press and release 13WIND/+ and 14BARO/-/ to adjust the values.

Hold 13WIND/+ and 14BARO/-/ over 2 seconds to adjust the values rapidly.

Press and release 10SETto confirm and move to the next item.

To exit the setting mode any time, press 18

LIGHT/SNOOZEbutton.

Setting Order

1. BEEP On/Off 4. Time Zone 7. Year 10. 12/24 Hour Format 13. Temperature Unit 16. Light Intensity Unit 19. Hemisphere

2. NTP On/Off 5. DST On/Off 8. Month 11. Hour 14. Pressure Unit 17. Rainfall Unit 20. End of setting

3. Language 6. M-D/D-M Date Format 9. Day 12. Minute 15. Relative Pressure Calibration 18. Wind Speed Unit

1.) Press and hold 10SETbutton entering the settings. Beep ON flashes. Press 13WIND/+ or 14BARO/-/ to change between Beep on and Beep off. Press 10SETto select NTP on/off.
2.) When NTP ON flashes, press 13WIND/+ or 14BARO/-/ to change between NTP on and NTP off. Press 10SETto select Language.
3.) When Language flashes, press 13WIND/+ or 14BARO/-/ to change between weekday languages. Press 10SETto select time zone.
4.) When Time Zone flashes, press 13WIND/+ or 14BARO/-/ to set time zone. Press 10SETto select DST on/off.
5.) When DST ON flashes, press 13WIND/+ or 14BARO/-/ to change between DST on and DST off. Press 10SETto select date format.
6.) When D–M flashes, press 13WIND/+ or 14 BARO/-/ to switch between M-D and D-M date format. Press 10SETto select year.
7.) When year flashes, press 13WIND/+ or 14BARO/-/ to adjust the calendar year. Press 10SETto select month.
8.) When month flashes, press 13WIND/+ or 14BARO/-/ to adjust the calendar month. Press 10SETto select day.
9.) When Day flashes, press 13WIND/+ or 14BARO/-/ to adjust the calendar day. Press 10SETto select 12/24-hour format.
10.) When 12 H flashes, press 13WIND/+ or 14 BARO/-/ to change between 12 hour and 24 hour format. Press 10SETto select hour.
11.) When hour flashes, press 13WIND/+ or 14 BARO/-/ to adjust the hour. Press 10SETto select minute.
12.) When minute flashes, press 13WIND/+ or 14BARO/-/ to adjust the minute. Press 10SETto select temperature unit.
13.) When flashes, press 13WIND/+ or 14BARO/-/ to change between and . Press 10SETto select pressure unit.
14.) When pressure unit flashes, press 13WIND/+ or 14BARO/-/ to change between hPa, inHg and mmHg. Press 10SETto select relative pressure calibration.
15.) When Relative Pressure flashes, press 13WIND/+ or 14 BARO/-/ to adjust the relative pressure. Press 10SETto select Light intensity unit.
16.) When Light intensity unit flashes, press 13WIND/+ or 14BARO/-/ to change unit between Klux, fc and w/m2. Press 10SETto select rainfall unit. When Rain unit flashes, press 13WIND/+ or 14BARO/-/ to change unit
17.) between in and mm. Press 10SETto select windspeed unit. When Windspeed unit flashes, press 13WIND/+ or 14BARO/-/ to change
18.) unit between in and mm. Press 10SETto select hemisphere. When NTH flashes, press 13WIND/+ or 14BARO/-/ to change hemisphere
19.) between NTH (northern) and STH (southern). Press 10SETto save and exit the setting. It will return to the normal mode display.

Setting the Alarm In normal time display, press 10SETbutton to switch display alarm time (alarm time
mode). In alarm time display, press and hold 10SETbutton over 2 seconds to enter alarm
setting mode. Hour of alarm starts to flash. Press 13WIND/+button or 14BARO/-/ button to set required alarm hours.
Hold 13WIND/+button or 14BARO/-/ button to adjust alarm hours quickly. Press 10SETbutton to select minute of Alarm. Minute of alarm starts to flash. Press 13WIND/+button or 14BARO/-/ button to set required alarm minutes.
Hold 13WIND/+button or 14BARO/-/ button to adjust alarm minutes quickly. Press 10SETbutton to save all settings and exit to normal display mode.
Deactivate/Activate Alarm In alarm time display, press 11TEMP/ button to select the Alarm on or off. If the alarm is on, its corresponding alarm icon will be shown on the display. When the alarm is ringing, press any buttons except 18 LIGHT/SNOOZEbutton to
stop the alarm signal. It is not necessary to reactivate the alarm. It will ring again this time next day.
Snooze Function When the alarm rings, press 18 LIGHT/SNOOZEbutton to pause the alarm. The snooze indicator icon keep flashing. The alarm will resume after 5 minutes.
TEMPERATURE
Temperature/Humidity Trend
Tendency arrows allow you to quickly determine of temperature and humidity are rising and falling in a one-hour update period.
PRESSURE
In normal mode, press 14 BARO/-/ button switch between absolute and relative pressure.
WIND
Selecting Wind Display Mode In normal display mode, press 13WIND/+button to switch between current average wind speed, gust wind speed and wind direction.
RAIN
Select the Rainfall Display Mode In normal display mode, press 12RAINbutton to switch between Rain Rate, Rain Event, Rain Hourly ,Rain Daily, Rain Weekly, Rain Monthly and Rain Total.

Reset the Total Rainfall Record In normal display mode, press and hold 12RAINbutton over 2 seconds to reset the rain record.
WEATHER
Weather Index When reading the Weather Index display, you can press 11TEMP/ button to cycle through different weather indexes in the following order: Feels Like > Heat Index > Wind Chill
Weather Forecast The built-in barometer can notice atmospheric pressure changes, and based on the data collected, can predict the weather conditions. There are 6 weather icons — Sunny, Partly Cloudy, Cloudy, Rainy, Stormy and Snowy.

Ice Alert When outdoor temperature is lower than 1/33.8, the snowflake icon the LCD display.

will appear on

MAX/MIN
In normal display mode, press 16MAX/MINbutton switching between maximum and minimum value.

To View the Accumulated MAX/MIN
Display Feel like, Wind Chill, Heat Index, Dew Point Max/Min Values 1.) When the max values are displayed, press 11TEMP/ button to interchange viewing
the Outdoor temperature ¹ Feel like ¹ Wind Chill ¹ Heat Index¹Dew Point ¹ Outdoor temperature. 2.) When the min values are displayed, press 11TEMP/ button to interchange viewing the outdoor temperature ¹ Feel like ¹ Wind Chill ¹ Heat Index¹Dew Point ¹ Outdoor temperature.
Display Wind Speed, Wind Gust Max Values
When the max values are displayed, press 13WIND/+ button to interchange viewing between the AVERAGE and GUST wind speeds.
Display Rain Rate, Daily Rain, Weekly Rain and Monthly Rain Max Values
When the max values are displayed, press 12RAINbutton to interchange viewing Rain Rate ¹ Daily Rain ¹ Weekly Rain ¹ Monthly Rain.

Display Absolute and Relative pressure Max/Min Values 1.) When the max values are displayed, press 14BARO/-/ button to interchange
viewing between Absolute and Relative pressure. 2.) When the min values are displayed, press 14BARO/-/ button to interchange
viewing between Absolute and Relative pressure.
Display indoor and other channels sensor temperature & humidity Max/Min values 1.) When the max values are displayed, press 17CHANNELbutton to interchange viewing
indoor and paired outdoor sensor(s) temperature and humidity. 2.) When the min values are displayed, press 17CHANNELbutton to interchange viewing
indoor and paired outdoor sensor(s) temperature and humidity.

To Clear the MAX/MIN Data Record To clear the max value, press and hold 16MAX/MINbutton over 2 seconds while max
values are displayed. To clear the min value, press and hold 16MAX/MINbutton over 2 seconds while min
values are displayed.
HI/LO ALERT SETTING
To View the Alert Setting In normal display mode, press 15ALERTbutton switching between Hi alert and Low
alert setting value.

To Set the Alert
In normal display mode, press and hold 15ALERTbutton over 2 seconds to enter the alert setting mode.
Press 13WIND/+button and 14BARO/-/ button to adjust the value up or down, then press 11TEMP/ button to turn on/off the alert.
Press 15ALERTbutton to confirm and jump to next setting. The icon or will display when the alert is on.

To exit the alert setting mode at any time, press the 18

LIGHT/SNOOZE button.

To Silence the Hi/Lo Alert Alarm

Press the 18

LIGHT/SNOOZE button on top of the display console to silence the

alarm, or it will automatically turn off after one minute.

BACKLIGHT

Display Backlight

With DC Adapter

The backlight can only be continuously on when the DC adapter is permanently on. When

the DC adapter is disconnected, the backlight can be temporarily turned on.

Press 18

LIGHT/SNOOZEbutton to adjust the backlight brightness, High, Low and

Without DC Adapter

Press 18

LIGHT/SNOOZEbutton temporarily turn on the backlight for 15 seconds.

Manufacturer: FUJIAN YOUTONG INDUSTRIES CO.,LTD. Address: North part of 1st, 2nd~3rd floor, Building 1#, M9511 industries park, No.18, Majiang Road, Mawei DISTRICT, Fuzhou City, Fujian, China
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/ TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm(8 inches)during normal operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>