CerebralFit GY-PDT1 Neuradiant 1070nm Brain Photobiomodulation Device User Manual

June 9, 2024
CerebralFit

CerebralFit GY-PDT1 Neuradiant 1070nm Brain Photobiomodulation Device

CerebralFit-GY-PDT1-Neuradiant-1070nm-Brain-Photobiomodulation-Device-
PRODUCT

Product Information: CerebralLight 1070

The CerebralLight 1070 is a personal brain stimulation device designed to support peak performance and brain health. The device uses nutraceutical and electroceutical technology to provide specific types of stimulation through four default programs. It comes with a helmet, control box, power adapters, foam headpiece, fixation sponges, connection cables, and a user manual.

Please note that the product is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease. Also, exceeding the recommended daily use is not recommended.

Getting Started

Remove the helmet and components from the case. Take the Velcro strips from the adhesive paper and apply them to the inside of the helmet as shown in the diagram. Apply the sponges or foam headpiece onto the Velcro strips if fitted during use. Use Velcro on the clear plastic inside the helmet.

Packing List & AccessoriesCerebralFit-GY-PDT1-Neuradiant-1070nm-Brain-
Photobiomodulation-Device-FIG 3

  • Helmet Fixation Sponges
  • Handbag Instruction Manual
  • Power Adapters Quick Start Guide
  • Control Box Connection Cables
  • Foam Headpiece Velcro

Set up

  1. Fitting Guide
    Remove the helmet and components from the case. Take the Velcro strips from the adhesive paper and apply onto the inside of the helmet as shown in the diagram. Apply the sponges or foam headpiece onto the Velcro so the unit is fitted during use. Do not place any Velcro on the clear plastic inside the helmet.CerebralFit-GY-PDT1-Neuradiant-1070nm-Brain-Photobiomodulation-
Device-FIG 4

  2. Turn on the Device
    Connect the helmet with the controller, connect the controller with the first power adapter.
    Connect the controller with the second power adapterCerebralFit-GY-PDT1
-Neuradiant-1070nm-Brain-Photobiomodulation-Device-FIG 5

Turn on the Device

Connect the helmet with the controller, using the first power adapter. Connect the controller with the second power adapter using the second power adapter.

Consultation

Customers who purchased the CerebralLight 1070 with the 4 quadrant function will be provided with a code to access clinical protocols and an appointment link to arrange for their 90-day personalized consultation.

A 1-hour consultation is offered to those who purchased the CerebralLight 1070 and is designed to ensure safe and effective use of the device for improving general health and wellness. We will answer questions on the use of the different programs, answer specific questions you may have, and construct a ‘real world’ set of metrics that will define clinical progress. To book your consultation, please email us at: messages@cerebralfit.com
Customers who purchased the CerebralLight 1070 with the 4 quadrant function will be provided with a code to access the clinical protocols and an appointment link to arrange your 90-day personalized consultation.

Programs

The CerebralLight 1070 provides four default programs designed to support specific types of stimulation. Each program is unique and made up of three main inputs; time, pulse rate, and intensity.
Do not exceed the recommended daily use.
The four default programs are designed to provide specific types of stimulation to support the establishment of specific physical and mental states. We recommend using the device twice a day, morning and evening We do not recommend exceeding this daily use.

Program Inputs
Each program is unique and made up of three main inputs; time, pulse rate, and intensity which are out- lined below.

Time
The amount of time the program will run from start to finish. The unit will make a beep at the start and end of the chosen program. The maximum time for a program is 30 minutes.

Pulse Rate
The pulse rate is the frequency that the light flashes every second. At 10Hz the light will flash 10 times per second, similarly at 40Hz it will be 40 times per second. The maximum pulse rate is 9999 Hz.

Intensity
This reflects the duty cycle of the light or the amount of time in which the light will be on for every pulse. For example, if the light pulses at an intensity of 25% once a second, it means that the light will remain on for only 0.25 seconds. With full intensity of 100%, no pulse rate can be set.

Program Descriptions

Understanding the default ProgramsCerebralFit-GY-PDT1-Neuradiant-1070nm-
Brain-Photobiomodulation-Device-FIG 9 CerebralFit-GY-PDT1-Neuradiant-1070nm-
Brain-Photobiomodulation-Device-FIG 10

Peace
This program uses a 10Hz pulse rate associated with alpha brain waves, fostering a relaxed and restful state of consciousness. The light intensity is low so that you can enjoy a longer exposure time of 9 minutes. This program can be used with meditation activities or other integrative mind-body awareness practices to calm the central nervous system further.CerebralFit-
GY-PDT1-Neuradiant-1070nm-Brain-Photobiomodulation-Device-FIG
11

Focus
The Focus program uses a 40Hz pulse rate associated with gamma brain waves. Gamma brain waves have shown improved cognitive functioning, including short- term memory, reaction time, mental flexibility, and positive neurophysiological effects. The recommended duration is 6 minutes. We encourage starting with 3 minutes, pausing to notice how you feel before 8continuing with the second 3-minute sessionCerebralFit-GY-PDT1-Neuradiant-
1070nm-Brain-Photobiomodulation-Device-FIG 12

Energize
The Energize program boosts cortical blood flow, giving more oxygen to the brain. The 20Hz Beta brain waves help to increase attention and clarity. This pulse rate is also associated with increased adenosine triphosphate (ATP) production. The duration of this program is slightly shorter as the intensity is higher, giving you a short burst of energyCerebralFit-GY-PDT1-Neuradiant-
1070nm-Brain-Photobiomodulation-Device-FIG 13

Glow
Encourages renewal and revitalization of cellular health, increasing blood flow and aiding removal of waste products. This program can be used for supporting general brain wellness, and for recovery after a period of ill health. This program also has cosmetic and dermatological applications as it improves the blood flow to the skin by stimulating elastin that improves skin appearance and enhancing blood flow to the scalp and thus promoting hair growth resulting in a truly healthy glow. This program does not use pulsing as the intensity is set to 100%.CerebralFit-GY-PDT1-Neuradiant-1070nm-Brain-
Photobiomodulation-Device-FIG 14

Custom Program

These are individualized programs developed in consultation with a qualified clinician. Each program is customized to efficiently achieve your personal wellness goals.CerebralFit-GY-PDT1-Neuradiant-1070nm-Brain-
Photobiomodulation-Device-FIG 15

Clinical Protocols & 4 Quadrant Functionality
Clinical Protocols are exclusively for use with the 4 quadrant feature which can only be used when purchased with 3 months of consultation with a qualified clinician. If you have bought the CerebralLight1070 and wish to upgrade the device, please contact Cerebral-Light at messages@cerebralfit.com.

There is growing recognition in the neuroscience community regarding the role of brain networks as being a primary driver in overall brain performance. Efficient communication among and between brain networks is a principal focus in developing effective digital neurotherapeutic (DN) applications. CerebralLight is contributing to the advancement of DN applications with the introduction of the CerebralLight 1070 with 4 quadrant function, by providing independently programmable pulse frequency, intensity, and duration to four key brain quadrants (front, back, left, right) and thereby allowing users to define specific regions for customized stimulation protocols.

The image below is the control settings for the 4 quadrant feature and should be used under the guidance of a qualified clinician.CerebralFit-GY-PDT1
-Neuradiant-1070nm-Brain-Photobiomodulation-Device-FIG
16

In order to optimize the benefit for each user, we include a personalized consultation process. The consultation process has 3 basic components; assessment, protocol design and implementation, as well as continuous integration. Each individual has their own case history, resources, and expectations and therefore the goal of the consultation is to understand and incorporate those factors into the CerebralLight 1070 protocol(s) they’ll be using.

The initial consultation will include a thorough review of the personal assessment materials the user will have previously completed and returned to Neuronic. The review of past experiences and concerns will support the consultant in advising on the photobiomodulation protocol design, establish ‘real world’ metrics for evaluating progress, and suggestions for obtaining further consultation or support. At this time, users will be instructed and practice the safe and efficient use of the CerebralLight 1070 and how to modify a protocol.

Safety Guidelines

Please follow the safety guidelines in the user manual to avoid injury or damage to the device.

General Guidelines
Photobiomodulation demonstrates a dose-response curve which means that there is a ‘sweet spot’ wherein the stimulation has the most positive impact on our cells and tissues. Too little stimulation provides little benefit, and too much stimulation can cause a diminishment of response. We therefore strongly suggest that users accept two basic principles:

  • More is not necessarily better. We’ve seen many instances wherein the best results come after relatively small amounts of stimulation, especially when it is delivered with the right pulse frequency and intensity.
  • Indications that you have had too much light stimulation can occur during or shortly after (30 seconds to 10 minutes) completing a protocol. They can also appear after a few hours. If you know you are particularly sensitive to energetic or pharmaceutical stimulation in general, then we suggest that you use the device for a few minutes initially and build up the usage gradually. If indications persist, consult your healthcare professional and contact Neuronic for additional support.

Helmet & Adapter Use Precautions
Please only use the adapter and transformer provided by the manufacturer to ensure the normal operation of the device. The company is not responsible for product failure caused by self-assembly or disassembly of the product. Please discontinue using the device if wet or there is visible damage to the helmet, adapter or cables, this includes usage in conditions of high humidity or temperature.

Our company does not bear any responsibility for the damage or any accidents caused by improper use.

Service Guarantee

Please refer to the user manual for information on the service guarantee.

You can return the device within the first 30 days for free. Additionally, we have an 80% refund policy, valid for one month from the time of purchase. Our product is covered with a 12-month warranty.

Disclaimers

Please refer to the user manual for disclaimers related to the product.

Our product cannot guarantee the same effects on each individual. There are no known side effects of using our device. Still, we advise you to consult your local doctor and conduct your independent research before purchasing our device.
These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure or prevent any disease.
Please note this is not a medical device. The focus of our consultation(s) is on the safe and effective use of the CerebralLight 1070 photobiomodulation device and is not to be considered medical advice, nor is it in any way to be considered a replacement for consultation with your current medical or other qualified healthcare providers.

Appendix

Please refer to the appendix in the user manual for additional information related to the product.

Product Parameters

Product Name      Neuradiant 1070nm

Model Number     GY-PDT1| Wave Length     1070nm
LED Numbers       256 pcs| Power                50mw/pc
Total Power         15W| Optical Power    24mw/cm2
Input Voltage       100-240 V| Work Voltage     5V ~ 6A
Input Current      800mA| Frequency             0-9999 Hz

OVERVIEW

Dr. Jeoff Drobot
ExPhys, NMD
Visionary Biological Medicine physician, bio-hacking pioneer and published author, Dr. Jeoffry Drobot is recognized as a leading authority on European Biological Medicine, electroceutical performance technology and athletic per- formance. Dr. Drobot is the founder and co-founder of the Biomed Centers in Scottsdale and New England, collectively the largest, most preeminent Biological Medical centers in North America. Additionally Cofounder of CerebralFit Brain Training, a Nutraceutical, Electroceutical, company translating the latest research into solutions for peak performance and brain health across a life span.
Dr. Drobot has spent the last twenty years harnessing the cut-ting edge science of Biological Medical technology to assess and amplify human biology and physiology. He is passionate about guiding people near and far who envision being free from chronic illness and those dedicated to preventing a seri-ous diagnosis from ever manifesting.

Guy Odishaw, CTO, NFP
Healthcare Entrepreneur, Bioelectric
Medicine Practitioner
Founder of Bhakti Wellness Center, one of the largest, most diverse, integrative medicine clinics in the country. Co-founder of the first integrative student health clinics in the country at the University of Minnesota. Most recently, in collaboration with Dr. Drobot, the co-founder of CerebralFit Brain Training, a Nutraceutical, Electroceutical, company translating the latest research into solutions for peak performance and brain health across a life span.
Guy’s 30 years of clinical experience specializing in treatment resistant chronic pain, traumatic brain injury and psycho-emotional trauma informs his approach to brain health. Additionally, his 20+ years as meditation instructor and facilitator of courses on personal growth help him understand how to support clients through the potent changes arising from Neurotherapy. Brain training does not only alleviate unwanted symptoms it often also positively changes ones whole sense of self and relationship to the world around them.

Fitting Guide
Remove the helmet and components from the case. Take the velcro strips from the adhesive paper and apply onto the inside of the helmet as shown in the diagram. Apply the sponges or foam headpiece onto the velcro so the unit is fitted during use. Do not place any velcro on the clear plastic inside the helmet

Turning on the Device
Connect the helmet with the controller, connect the controller with the first power adapter.
Connect the controller with the second power adapter.
After connecting the cables, you can turn on the device via the button on the top right.

Selecting a Program
Select one of our 4 programs as shown above for general wellness.

It’s recommended to use it morning and evening, just like brushing your teeth!

Starting a Program
Now that you have selected your program, click the start button when the helmet is placed on your head.

For more information about us, the device, the science and much more please visit our website at neuronic.online

Our product cannot guarantee the same effects on each individual. There are no known side effects of using our device. Still, we advise you to consult us or your local doctor and conduct your independent research before using the device.
Please note this is not a medical device, we do not claim to treat, cure, prevent or diagnose diseases.

Custom Program:
To be used when instructed by a clinician. Contact us at team@neuronic.online for çmore information.

Dr. Jeoff Drobot, ExPhys, NMD
drdrobot@cerebralfit.com | 866.953.4325

Guy Odishaw, NFP, CTO
godishaw@cerebralfit.com | 866.953.4325
cerebralfit.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals