Philips Norelco PQ208/40 Travel Electric Razor User Manual

Philips Norelco PQ208/40 Travel Electric Razor

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

General description (Fig. 1)

1. Protection cap
2. Shaving heads
3. Shaving unit
4. Retaining frame
5. Central spring of retaining frame
6. Release button
7. Hair chamber
8. On/off slide
9. id of the battery compartment
10. Philips Cleaning Spray (HQ 110) (Optional)
11. Cutter
12. Guard
13. Cleaning brush

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Warning

• Keep the appliance dry.
• This symbol means: Forbidden to clean with water (Fig. 2).
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Caution

• Use and store the appliance at a temperature between 5°C and 35°C.
• Remove the batteries from the appliance if you are not going to use them for a month or more.
• Use Philips batteries to achieve optimal shaving performance.
• Only use the cleaning brush supplied.
• Make sure the cleaning brush remains clean.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Preparing for use

Inserting the batteries

The appliance operates on two R6 AA 1.5-volt alkaline batteries. Preferably insert new Philips alkaline batteries to get optimal shaving performance.

Make sure that your hands are dry when you insert the batteries.

1. Remove the lid of the battery compartment (Fig. 3)

2. Place two batteries in the battery compartment (Fig. 4).
   Note: Make sure the + and – indications on the batteries match the indications in the battery compartment. Note: The shaver does not work if the batteries have been placed incorrectly.

3. Put the lid of the battery compartment back onto the appliance.
   First place the top part of the lid(1) and then press down the bottom part until you hear a click (2) (Fig. 5).

How to avoid damage due to battery leakage

• Do not expose the appliance to temperatures higher than 35°C.
• Remove the batteries if you are not going to use the appliance for a month or more.
• Do not leave empty batteries in the appliance.

Shaving time

Two new Philips alkaline batteries offer a shaving time of 60 minutes.

Using the appliance

• Remove the protection cap.
• Press the on/off slide to unlock it and push it upwards to switch on the shaver (Fig. 6). The on/off slide has an integrated switch lock to prevent accidental switching on of the shaver.
• Move the shaving heads over your skin. Make both straight and circular movements (Fig. 7). Note: Shave on a dry face only. Do not use the shaver in combination with gel, foam or water. Note: Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system.
• Push the on/off slide downwards to switch off the shaver.
• Clean the shaver after every shave, see chapter ‘Cleaning and maintenance’.
• Put the protection cap on the shaver after use to prevent damage and avoid dirt accumulation in the shaving heads (Fig. 8).

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.

Clean the shaver after every shave to guarantee better shaving performance. For the best cleaning result, we advise you to use Philips Cleaning Spray (HQ110). Ask your Philips dealer for information.

Note: Philips Shaving Head Cleaning Spray (HQ110) may not be available in all countries. Contact the Customer Care Centre in your country about the availability of this accessory.

After every shave: shaving unit and hair chamber

• Switch off the shaver.
• Clean the top of the appliance with the cleaning brush supplied (Fig. 9).
• Press the release button (1) and pull the shaving unit straight up off the shaver (2) (Fig. 10).
• Clean the inside of the shaving unit with the cleaning brush (Fig. 11).
• Clean the hair chamber with the cleaning brush (Fig. 12).
• Put the shaving unit back onto the shaver (Fig. 13).

Every two months: shaving heads

Note: Do not use cleaning agents or alcohol to clean the shaving heads. Only use Philips Cleaning Spray (HQ110).

• Switch off the shaver.

• Press the release button (1) and pull the shaving unit straight up off the shaver (2) (Fig. 10).

• To remove the retaining frame, push the sides of the central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2) (Fig. 14).

• Slide the shaving heads out of the retaining frame. Remove and clean one shaving head at a time. Each shaving head consists of a cutter and a guard (Fig. 15).
  Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.

• Remove the guard from the cutter (Fig. 16).

• Clean it with the short-bristled side of the cleaning brush. Brush carefully in the direction of the arrows (Fig. 17).

• Clean the guard with the long-bristled side of the cleaning brush (Fig. 18)

• Put the cutter back into the guard after cleaning (Fig. 19).

• Slide the shaving heads back into the retaining frame. (Fig. 20)

• Put the retaining frame back into the shaving unit (‘click’) (Fig. 21).

• Put the shaving unit back onto the shaver (Fig. 13).

Storage

Keep the appliance dry. Use and store the appliance at a temperature between 5°C and 35°C.

• Switch off the shaver.
• Put the protection cap on the shaver after use to prevent damage and avoid dirt accumulation in the shaving heads (Fig. 22).

Replacement

Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with Philips shaving heads only (HQ4+ for China or HQ56 for the rest of the world). For instructions on how to remove the shaving heads, see chapter ‘Cleaning and maintenance’, section ‘Every two months: shaving heads’.

Accessories

To retain the top performance of your shaver, make sure you clean it regularly and replace its shaving heads at the recommended time.

Shaving heads

• We advise you to replace your shaving heads every two years. Always replace them with Philips shaving heads only (HQ4 for China or HQ56 for the rest of the world) (Fig. 23).

Cleaning

• Use Philips Cleaning Spray (HQ110) to clean the shaving heads thoroughly.

Environment

• Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 24).
• Batteries contain substances that may pollute the environment. Do not throw away batteries with normal household waste, but dispose of them at an official collection point for batteries. Always remove the batteries before you discard them and hand in the appliance at an official collection point (Fig. 25).

Guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country. You find its phone number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Guarantee restrictions

The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country.

FREQUENTLY ASKED QUESTIONS

Can I use the shaver with gel, foam or water?

No, the shaver should only be used on a dry face.

How long does the shaving time last with new batteries?

Two new Philips alkaline batteries offer a shaving time of 60 minutes.

Can I use any type of battery in the shaver?

No, it is recommended to use new Philips alkaline batteries to achieve optimal shaving performance.

How often should I clean the shaver?

The shaver should be cleaned after every shave to guarantee better shaving performance.

Can I use scouring pads or abrasive cleaning agents to clean the shaver?

No, never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.

How often should I replace the shaving heads?

The shaving heads should be replaced every two years for optimal shaving results.

Can I dispose of the appliance with normal household waste?

No, do not throw away the appliance with normal household waste but hand it in at an official collection point for recycling.

Are the shaving heads covered by the international guarantee?

No, the shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear.

What should I do if I encounter a problem with the appliance?

If you are unable to solve the problem with the information provided in the user manual, contact the Consumer Care Centre in your country for assistance.

How does the Philips Norelco PQ208/40 Travel Electric Razor work?

The Philips Norelco PQ208/40 Travel Electric Razor is a battery-powered device that uses rotating blades to trim and cut facial hair. It features a compact and portable design, making it convenient for travel and on-the-go grooming.

How long does the battery last on the Philips Norelco PQ208/40?

The battery life of the Philips Norelco PQ208/40 can vary depending on usage. On average, the batteries can last for several months with regular use before needing replacement.

Is the Philips Norelco PQ208/40 suitable for sensitive skin?

The Philips Norelco PQ208/40 Travel Electric Razor is generally suitable for sensitive skin. Its blades are designed to minimize skin irritation and provide a comfortable shaving experience. However, individual experiences may vary, so it’s always a good idea to test the razor on a small area before using it extensively.

Can the Philips Norelco PQ208/40 handle longer facial hair?

While the Philips Norelco PQ208/40 is designed primarily for quick touch-ups and maintaining stubble, it may struggle with longer facial hair. It is more effective on shorter hair lengths for achieving a close shave.

Can I use the Philips Norelco PQ208/40 on other parts of the body?

The Philips Norelco PQ208/40 is primarily designed for facial grooming. While you may use it on other parts of the body, such as the neck or body areas with light hair, it may not provide the same level of performance as dedicated body groomers.

Is the Philips Norelco PQ208/40 easy to clean?

Yes, the Philips Norelco PQ208/40 is easy to clean. Simply remove the cutting head and brush off any hair debris using the included cleaning brush. Avoid submerging the device in water.

DOWNLOAD THE PDF LINK:Philips Norelco PQ20840 Travel Electric Razor USER MANUAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>