SmartLife Smart Life App User Manual

SmartLife Smart Life App

Product Introduction

Packing list: Smart Camera x 1, Manual x 1, USB Power Cord x 1, Power Adapter x 1,Screw Accessories Package x1

Basic Parameters

• Product Name: Smart Camera
• Pixel: 1.0Mp/2.0MP
• Video Compression: H.264 High Profile
• Image Enhancement: Digital Wide Dynamic 3D Noise Reduction
• Local Storage: MicroSD card
• Wireless Encryption: WEP/WPA/WPA2 Encryption
• Power Input: 5V 1A(Min)
• Total Power Consumption: 5W (Max)
• Compatible Networks: 2.4G 802.11 b/g/n
• Support Platform: Android/iOS

Component Description:

• Reset Button: Long press the “Reset” button for 5 seconds, or disconnect the power to reset the camera.
• It is recommended to insert an 8-64GB high-speed Micro SD card, otherwise, it will not be able to store, view historical video and support Important functions such as firmware upgrading.

INSTALL APP

Download APP: scan the QR code below to download and install Smart Life. Or search “Smart Life” in Play Store or App Store to install.
follow the instructions.

Add the Camera – Wi-Fi Pairing (Recommended)

• Make sure Wi-Fi is enabled and the camera is placed within the range with a strong signal.
• Connect the power adapter with the camera, and wait for the system to start up.
• Open the “Smart Life” APP, press the ‘+” in the upper right corner of the main screen (Figure 01); choose “Security & Sensor, and click “Smart Camera” (Figure 02) to add camera, and then click “Next step” (Figure 03);
• If the mobile phone is not connected to wi-fi, please click “Connect to Wi-fi” (Figure 04);
• It will jump to the WLAN interface and connects to Wi-Fi (Figure 05).
• Note: only a 2.4 GH Wi-Fi network is supported;
• Choose the Wi-Fi network to connect to and enter the password. (Figure 06);
• Click “Confirm”. It will jump to the interface and prompt to scan the QR code with the camera. Click “Continue” (Figure 07);
• A QR code will display on your screen and you need to scan it with the Smart Camera. (place the camera about 15-20 cm away from the smart phone). Then click “hear the prompt sound” (Figure. 08).
• When the progress reaches 100%, the camera is successfully connected (Figure 10). Click “Done” at the top;
• The screen will switch to a preview of the camera (Figure 11).
• Close the camera view to return to the Home page. The camera connected will be listed on the Home page. Click on the camera icon to launch the live monitor view (Figure 12).

Add The Device-AP Mode

If you want to use AP Mode, press the reset button on the machine

• Make sure Wi-Fi is available and connected to the Internet.
• Connect the camera to the power, system startup is completed.
• Open the Smart Lite” APP, press the’+ in the upper right corner of the main screen (Figure 13); choose “Security & Sensor’, click “Smart Camera” (Figure 14) to add a camera; Alternatively, choose “other ways” to add (as shown in Figure 15)
• Then click “hot spot configuration” (Figure 16;
• Then click” compatibility mode”, clicks'”Next” (Figure 17);
• Then click “change Network” (Figure 18);
• Then enter the password to complete the connection (Figure 19);
• Click Back and return to the APP compatible mode interface, where the Wi-Fi name and the connected Wi-Fi name are displayed Password, cick the “Confirm” button (Figure 20);
• The page jumps to where the interface prompts “Wi-f” to connect to the device hotspot and clicks “Connect” (Figure 21)
• The interface jumps to the WALN connection interface, finds the Wi-Fi at the beginning of “Smart Lifi”, and clicks on the connection (Figure 22);
• When the connection is completed, click back and return to the APP interface, at which time the APP display device is connected (Figure 23).
• At this time, the device has been successfully connected; the interface jumps to “Add Device Successful” (Figure 24);
• Then click “connected”, it will jump to the Preview Interface of the Device (Figure 25)
• Close the device preview interface and the interface returns to the APP home page, at which point the connected device will appear on the APP home page.(Fig. 26), After entering the device interface to view, no need to re-add, click directly into the device interface to view.

APP Video Browsing Details

Note

• Do not block the Wi-Fi signal by wall or furniture.
• Do not place the camera near the microwave oven.
• Keep the camera away from AV cables and data cables.
• To get a strong Wi-Fi signal, place the camera close to the router with fewer objects in between.
• To connect the security camera to another network, please reset/restart the camera first.

The name and content of the harmful substances in the product

This product conforms to RoHS environmental protection requirements. At present, there is no mature technology in the world to replace or reduce the lead content in electronic ceramics. porcelain, optical glass, steel, and
copper alloy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>