GOLOZA LA-C337 Projection Alarm Clock with FM Radio User Manual

GOLOZA LA-C337 Projection Alarm Clock with FM Radio User Manual

Before use

Thanks a lot for choosing our product. Please read the following information carefully:

1. This product is designed to be used with the original adaptor provided in the package.
2. The built-in battery inside the product is only for time backup in case of a power outage.
3. Please follow the instructions to set up the product.

We hope you have a nice experience using our product.

Precautions:

1. Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity..
2. A cloth or other protective material should be placed between the clock and the furniture.
3. Plug off the power before cleaning the clock with a soft cloth moistened only with mild soap and water.
4. You must use the original adapter.
5. Do not disassemble the clock or touch any components.

Package Content

• Alarm Clock x1

• Charging Cable x1

• Adapter x1

• User Manual x1

Diagram

1. FM Radio
2. Digit Decrease
3. Digit Increase
4. Snooze/Display Button
5. Time Setting
6. Projection Button
7. Projection Len
8. Projection Pillar
9. USB Charging Port
10. Type-C Power Supply Port
11. 11. Radio Volume Adjustment
12. Display Brightness Adjustment
13. Alarm Volume Adjustment
14. Alarm Setting
15. Antenna
16. Reset

Time Setting

In time display mode, long press  to enter HOUR setting, short press to adjust time and long press  to quickly adjust. Short press again to enter MINUTE setting. After setting is finished, short press to save  .

12/24-Hour Time Format Conversion

In time display mode, short press saved to switch between 12 and 24 hour format. The setting automatically  saved  after 3s.

Alarm Setting

In time display mode, long press , to set alarm 1, short press to set HOUR, long press to quickly adjust. Short press , again to set MINUTE, Short press , to save settings. NOTE: Setting steps of alarm 2 is the same as the alarm 1.

Alarm Ringtones Setting

1. In time display mode, short press to choose ringtones, short press it again to next ringtone. When you setting, the display will simultaneously show the correspond icon namely, 01, 02, 03, BU, and RD. The last ringtone you choose will be the alarm ringtone.
   NOTE: If you set the FM radio as your alarm ringtone, the last radio channel you listen will be alarm ringtone.

2. Toggle the switch to to adjust the alarm volume.

Snooze Mode

When the alarm rings, short press temporarily stop the alarm for 9 minutes and the alarm will go off again after 9 minutes’ snooze.

Turn off the Alarm

1. When the alarm rings, short press any button except to turn off the alarm, and the alarm will go off on the next day.
2. Short press , or , to turn off the alarm permanently, and the display will not show the icons or

Deactivate the Alarm

Press the or  will never go off. on the back of the clock, the alarm icon on the display will disappear, and the alarm

FM Setting

FM Station Searching

1. Short press to turn on/off FM radio, Long press to manually search radio channels.
   NOTE: Long press the FM radio will automatically search and save up to 30 channels when you use it at the first time.

2. When you listening to the radio, short press to switch saved radio channels.

3. Adjust FM volume via the button on the back.

FM Sleep Mode

1. In radio mode, short press to enter FM sleep mode, press it again to set sleep time 5, 15, 30, 45, 90 minutes).
2. After setting, short press  and the display will show the remaining sleep time.

NOTE: The FM radio will automatically turn off after the sleep time is finished.

Projection

Brightness adjustment

In time display mode, short press to turn on the projection, and short press again to adjust projection brightness (Low-Medium-High-OFF), Long pressing can flip the time projection in 180 degrees.

Note:

• The best projection distance is from 0.5m to 3m, so please maintain the projection distance in this range.
• The projection cannot be used in a strong light environment, so the projection bright- ness may be weak in the day.
• After power outage, the projection brightness and display direction are the same as the last time.

Projection Setting

In projection mode, rotate the projection pillar to adjust projection angle from-90 degrees to 90 degrees.

Display Brightness Setting

1. Steplessly adjust display brightness via the switch on the back,
2. Long press to turn on or off the display, the projection brightness will not change.

Note: If you adjust the display to low brightness before sleeping, please adjust the brightness to the highest via on the next day.

USB Charging Function

1. The Type-C 10 port on the back is used for the power supply of the clock.
2. The USB 9 port on the side is used for charging your phone, tablets, etc.

Note: Please use the original adapter while charging.

Specification

• Input:  5V=1.5A
• Projection angle: -90°-90°
• Projection brightness: 3 levels
• Usb output: 5V=1.2A (Max)
• Projection distance: 0. 5 -3m
• Alarm ringtones: 4 ringtones + FM radio

FAQ

How to set up the projection correctly?

Why does the clock not get FM radio signals?

1. Make sure that the FM antenna on the back is completely untied. 2. Please check whether the location is remote and whether other signal receptions are normal. 3. Move the clock to an open space to check whether it can receive signals. 4. Check if there are any interference signals or devices to affect the signal such as mobile phones, keys, and so on.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncon- trolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

WARNING:

Do not ingest the battery, Chemical Burn Hazard (the remote control supplied with). This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal bums in just 2 hours and can lead to death.

Keep new and used batteries away from children, If the battery compartment, isn’t closed securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seex immediate medical attention.

This appliance can be used by children over 8 years old, and children shall not play with the appliance. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>