LINDY 43202 2 Port Type C Mst Kvm Docking Station User Manual
- June 3, 2024
- LINDY
Table of Contents
43202 2 Port Type C Mst Kvm Docking Station
User Manual
Safety Instructions
! WARNING ! Please read the following safety information carefully and
always keep this document with the product.
Failure to follow these precautions can result in serious injuries or death
from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death.
This device is a switching type power supply and can work with supply voltages
in the range 100 – 240 VAC.
To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Introduction
Thank you for purchasing the 2 Port Type C MST KVM Docking Station. This
product has been designed to provide trouble free, reliable operation. It
benefits from both a LINDY 2-year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain
it for future reference.
This desktop docking station allows the user to control two Type C (with DP
alternate mode) sources such as a Laptop and a Smartphone or Tablet from two
displays, mouse, keyboard, headset, LAN and many more USB Type A and Type C
devices.
It’s a flexible solution for smart office and hybrid working applications
providing a lot of functions such as PD 3.0 up to 100W, dual MST with HDMI and
DisplayPort outputs, BC 1.2 charging and 2 ports Type C KVM switch.
Package Contents
- 2 Port Type C MST KVM Docking Station
- 20VDC 6A IEC C14 Power Supply, DC Jack 5.5/2.5mm
- Schuko and UK to IEC C13 power cables, 1m
- Lindy Manual
Features
- Docking Station with 2 port Type C KVM Switch
- Support resolutions up to 4K60Hz with HDR (single display)
- Support MST, max resolutions for dual display: 4K30 and 1920×1080@60Hz
- Compatible with USB Type C sources with DisplayPort Alternate mode support
- Support BC 1.2 charging
- Support PD 3.0 up to 100W on port 1 and up to 65W on port 2
- Button for switching and powering On/Off the unit
User Manual
Specification
- HDMI 2.0
- DisplayPort 1.4
- Maximum Bandwidth: 18G
- HDCP 2.2/1.4 Pass-Through
- USB 3.1 Gen 1 / USB 3.2 Gen 1 up to 5Gbps
- Analogue Audio Stereo, sampling rate 24bit/96KHz
- RJ45 Gigabit Ethernet 10/100/1000Mbps
- Operating Temperature: 0°C – 55°C (32°F – 131°F)
- Storage Temperature: -10°C – 70°C (14°F – 158°F)
- Relative Humidity: 0 – 85% RH (Non-condensing)
- Plastic and Aluminium Housing
- Colour: Black
- Power Requirements: AC100-240V 50/60Hz
- Chipsets:
• VL170 / VL160: Electronic switch
• FL7102 / FL7112: Protocol
• AX88179A: Gigabit Ethernet
• GL3510: USB 3.0 hub
• KT0200: Audio
• RTD2142: Video
Installation & Operation
Front
- DC 20V: Connect the 20V 6A Power Supply to give power to the docking station and provide 65W power charging to PC2 host device.
- PC2: Connect a Type C source using a USB 3.1 Gen1 (USB 3.2 Gen1) or above Type C Male to Male cable. Please Note: Type C source connected must support DisplayPort Alternate mode, it can also be powered from the Docking Station’s power supply if supporting Power Delivery (up to 65W).
- PC1: Connect a Type C source using a USB 3.1 Gen1 (USB 3.2 Gen1) or above Type C Male to Male cable. Please Note: Type C source connected must support DisplayPort Alternate mode, it can also be powered from the PD port connecting a Type C PD power supply (up to 100W).
- SWITCH: for future use.
- DP: Connect a DisplayPort monitor using a DisplayPort Male to Male cable.
- HDMI: Connect a HDMI monitor using a HDMI Male to Male cable.
- RJ45: Connect to a network LAN using a Cat.5e or above cable.
- USB: Connect USB devices (support up to 5Gbps each port).
- PD: Connect a Type C PD power supply to provide power on PC1 port. Please Note: Type C source connected to PC1 port must support PD, the charging power depends on the PD power supply connected (up to 100W).
Rear
- AUDIO: 3.5mm stereo input/output to connect headphones, speakers or microphone.
- USB/BC 1.2: Connect USB devices (support up to 5Gbps and BC 1.2 for fast charging on each port).
- PC1 LED: Illuminate when PC1 is selected.
- PC2 LED: Illuminate when PC2 is selected.
Top POWER / SWITCH Button: Long press (3 seconds) to power the unit
On/Off, short press to switch between PC1 and PC2 ports.
The LED on the button will light up when the unit is connected and gets power
from a host.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1
| Hersteller / Manufacturer (EU): | Manufacturer (UK): |
|---|
LINDY-Elektronik GmbH
Markircher Str. 20 68229
Mannheim Germany
Email: info@lindy.com,
T: +49 (0)621 470050| LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk,
T: +44 (0)1642 754000
Tested to comply with
FCC standards.
For home and office use.
No. 43202
1st Edition, May 2022
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>