Playtive HG10984A Pool Float Kids Swim Ring Beach Ball Instruction Manual

Playtime HG10984A Pool Float Kids Swim Ring Beach Ball

List of pictograms used

• Safety information
• Instructions for use

Kids’ Inflatable Pool Float/ Kids’ Swim Ring/Beach Ball

Introduction

We congratulate you on the purchase of your new product. You have chosen a high-quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. DEFIANCE AND VIOLATION OF THIS MANUAL CAN RESULT IN HAZARDS, SUCH AS PERSONAL INJURY AND DEATH, E.G. DROWNING!

Intended use
This product is designed as a toy for private use. For HG10984A, and HG10984B: The product is not suitable for children under 3 years of age. For HG10984C: The product is suitable for all ages. Any use other than previously mentioned or any product modification is prohibited and can lead to injuries and/or product damage. The manufacturer is not liable for any damages caused by any use other than for the intended purpose. The prod-uct is not intended for commercial use.

Description of parts

1. Kids’ Inflatable Pool Float (HG10984A)/ Kids’ Swim Ring (HG10984B)/ Beach Ball (HG10984C)
2. Air valve
3. Repair patch

Scope of delivery

• 1 Kids’ Inflatable Pool Float (HG10984A)/ Kids’ Swim Ring (HG10984B)/ Beach Ball (HG10984C)
• 2 Repair patches
• 1 Instructions for use

Safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

For HG10984A, HG10984B

• DANGER TO LIFE! Never let children unsupervised with the product. The product may not be used by children under the age of 3.
• DANGER TO LIFE THROUGH DROWNING! Never leave children and product alone and unsupervised in the water. There is a danger of drowning. Use swimming aids if necessary. Never stay in the water alone. Make sure that at least one competent person is present.
• WARNING! Only to be used in water in which the child is within its depth and under adult supervision.
• WARNING! Not suitable for children under 36 months! Risk of choking from swallowing small part.

For all models:

• RISK OF FATAL INJURY AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN! Never leave children unattended with the packaging material or the product. There is a risk of suffocation from the packaging materials and a risk of fatal injury by strangulation. Children often underestimate dangers.
• CAUTION! RISK OF INJURY! Make sure that all parts are undamaged. Damaged parts could adversely affect safety and function. CAUTION! RISK OF INJURY! Make sure that you do not pump too much air into the product. Otherwise, the product may burst.
• CAUTION! RISK OF POISONING AND RISK OF DAMAGE TO PROPERTY! Do not light any fires near the product and keep it away from sources of heat.
• Do not use the product on hard or stony ground. Otherwise, this may result in damage to the product.
• Keep the product away from pointed objects. Otherwise, damage to the product may result.
• CAUTION! The air chambers may be pressed under the water’s surface when getting onto it. This – as well as uneven loading of the product – could cause it to tip over.
• Keep the repair patch 3 out of the reach of children.

Operation

• Note: Before using the product for the first time, check it carefully for holes, porous places, and or seams that are not airtight by adults. Recommendation: Blow up the product and leave it alone for one day. Air new products in the open air for a few days.
• Note: You will need a pump with a conical adapter (ø approx. 7.5 mm / 17.5mm) for the air valve 2 to inflate the product.

Letting in air

• CAUTION! Inflatable plastic products react sensitively to the cold and hot. That is why you should never use the product when the ambient temperature falls to below 15 ° C and rises above 40 ° C. Otherwise damage to the product may result.
• Note: Basically,  only an adult should be responsible for pumping the product up. Make sure that you do not pump too much air into the product. On no ac-count should you use a compressor. Stop the process when resistance increases during pumping and the seams start to stretch. Otherwise, the material might tear. Only use manual pumps and/or pumps specifically designed for use with inflatable plastic products.
• IMPORTANT! Keep in mind that air temperature and weather conditions can affect the air pressure inside inflatable products. In cold weather, the prod-uct behaves as if it has less air pressure in it because the air inside contracts. Under these conditions, you may have to add air. In hot weather, the air inside expands. Under these conditions, you may have to remove air to avoid overfilling.
• Roll the product out first and then check for holes, tears, and other damage.
• Inflate all air chambers.

Letting air out
Open the air valve 2 and let all the air out of the product.

Note: Make sure that the product is completely dry before folding it together. This will prevent the formation of mold, bad odors, and discoloration.

Cleaning and care

Use a slightly damp, lint-free cloth to clean the product. On no account should you use corrosive or scouring detergents.

Storage instruction
Make sure that the product is completely dry both inside and out when wishing to store it for any length of time. Otherwise, mildew and mold may form. Store the product in a dark, dry place – out of reach of children. The ideal storage temperature is 10 – 20 °C. Ensure that the product does not come into contact with sharp objects during storage.

Repairing the product

Note: Minor damage can be repaired by the owner using the supplied repair kit. Has any major damage been carried out at a specialist repair shop?

• First, let all the air escape from of the product (see “Letting air out”).
• Cut the repair patch 3 to suit the size of the hole. Note: Ensure that the repair patch 3 is larger than the hole and overlaps the edges of the hole.
• Round off the sides of the repair patch 3 and pull off the protective foil.
• Place the repair patch 3 on the hole and press it down firmly. If necessary, stand a heavy object on the repair patch 3.
• Wait for 24 hours before you pump up the product again.

Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects,s you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below. The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase. Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product. Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts. This warranty becomes void if the product has been damaged, or used or maintained improperly. The warranty covers material or manufacturing de-fects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions: Please have the till receipt and the item number (IAN 446481_2307) available as proof of pur-chase. You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product. If functional or other defects occur, please contact the service department listed either by telephone or by e-mail. You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

Service Great Britain Tel.: 08000569216 E-Mail: owim@lidl.co.uk

OWIM GmbH & Co. KG Stiftsbergstraße 1 74167 Neckarsulm GERMANY Model-No.: HG10984A / HG10984B / HG10984C Version: 01/2024 Last Information Update · Információk állása Stanje informacij · Stav informací · Stav informácií Stand der Informationen: 10/2023 Ident.-No.: HG10984A/B/C102023-4

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>