SYMA X500 Foldable Drone Camera User Manual

SYMA X500 Foldable Drone Camera User Manual

usa@symatoys.com (US)
eu@symatoys.com (EU)
http://www.symatoys.com

Important safety information

Thank you for purchasing this SYMA product. To ensure that you operate the drone correctly, please read these instructions carefully before first use and store them in a safe place for future reference.

Safety Guide

1. About or experienced RC pilot’s supervision is recommended for children.
2. Non-rechargeable batteries should not be recharge<!: Batteries should be inserted with a correct polarity; Different types of batteries. new or used batteries should not be mixing.
3. Turn off the drone/transmitter and remove the batteries when not in use.
4. The supply terminals are not be short-circuited
5. Keep away from the rotating blades (rotating blades my cause bodily injuries. or damage to property).
6. Attention: please assemble the <lone with the guidance of adults.
7. Do not look directly into the LED lights of the drone as it can damage your eyes.
8. The packing has to be kept since it contains important information.
9. Non-rechargeable galleries are not to be recharged.
10. Rechargeable galleries are to be remove<! from the toy before being charged.
11. Batteries are only to be charge<! by adults or by children at least 14 years old.
12. Different types of batteries or new an<l use galleries are not to be mixed<l,
13. Galleries are to be inserted with the correct polarity,
14. Exhausted batteries are to be remove<! from the drone.
15. The supply terminals are not to be short-circuited.
16. Don’t use or leave the battery near a heat source such as fire or heater.
17. After flying, don’t charge batteries at once to avoid batteries too heat to cause to the fire. make sure it cool down before charging.
18. Don’t hit or let batteries fall down when charging to avoid inner short-circuit.
19. Only use the included adaptor for charging. Please replace with new batteries in time if batteries aging.
20. After full charging, please take off adaptor in time. otherwise batteries will discharge and charge again. this way will shorten batteries service life.
21. Remove and insert the battery correctly.

Repair and maintenance

1. Use clean and soft cloth to clean the product.
2. Keep away the product from heat sources.
3. Avoid water exposure to this product. Moisture may cause damages of the aircraft electronic parts.
4. Transformers used with the aircraft should be examined regularly. Such as the cord. plug. enclosure and other parts. In case of any damages is found, please stop using it unless it is repaired or replaced.

Specifications

drone this product

Download the SYMA AIR app and watch the video tutorial

Installing the SYMAAIR app
Scan the OR code with your mobile device or download the app from your app store.

• Note: For best results. use a device with iOS 8.0/Android 5.0 or later.

Drone components

Remote control

Assembling the product

Charging the aircraft battery

Battery warning :

1. Failure to follow all the instructions may result in serious injury. irreparable damage to the battery and may cause a fire, smoke or explosion.
2. Always check the battery’s condition before charging or using it.
3. Replace the battery if it has been dropped, or in case of odor. overheating , discolouration. deformation or leakage.
4. Use only the supplied charging cable.
5. The battery temperature must never exceed 60C:(140°F) otherwise the battery could be damaged or ignite.
6. Never charger on a flammable surface near flammable products or inside a vehicle ( preferably place the battery in an on-flammable and nonconductive container ).
7. Never leave the battery unattended during the charging process. Never disassemble or modify the housing’s wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery . Do not short circuit the batteries .
8. Never expose the battery to moisture or direct sunlight. or store it in a place where temperatures could exceed60t.(drone in the sun, for example)
9.  Always keep it out of reach of children .
10.  Improper battery use may result in a fire. explosion or other hazard.
11. Non-rechargeable batteries are not to be recharged . Rechargeable batteries are only to be charged under adult supervision .
12.  Different types of batteries or new and used batteries are not to be mixed.
13. Batteries are to be inserted with the correct polarity.
14. The supply terminals are not to be short-circuited. Regular examination of transformer or battery charger for any damage to their cord, plug. enclosure and other parts and they must not be used until the damage has been repaired.
15. The packaging has to be kept since it contains important information.

Attaching the phone holder

Flight preparation and turning the aircraft on/off
Pairing the remote control with the aircraft

Calibrating the compass

Turning the drone off

Using the remote control

Flight modes

Smart app features

Understanding the aircraft LED indicators

Troubleshooting

Accessories

(available separately)

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radian technician for help.
  -This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure).This device must not be collocated or operating in conjunction with any other antenna or transmitter:

RF frequency band :2409-2475MHZ
Transmitter power: -3.73d8m (Max.)
product name: (DRONE)
model number: (XSOO)
Brand name :SYMA

Declaration of Conformity Inserts:
Hereby , GuangDong SYMA Model Aircraft Industrial Co. , ltd. declares that the radio equipment type drone is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.symatoys.com/down/declaration-of-conformity.html

info.cetservice@gmail.com
info.cetservice@gmail.com
amz@symatoys.com
warranty@symatoys.com.cn

WARRANTY

GET YOUR WARRANTY CODE AT aymatoya.com.cn/pages/warranty- signup
HAVE YOUR ORDER NUMBER AND/OR VEHICLE UPC READY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>