EUROLAIKAS MULTI4 Universal Hand Transmitter Instructions
- June 13, 2024
- EUROLAIKAS
Table of Contents
EUROLAIKAS MULTI4 Universal Hand Transmitter
Product Information
The text-extract from the user manual contains a series of characters, numbers, and symbols. It is difficult to determine the exact product based on this information alone. Please provide more specific details or context about the product so that I can provide accurate information and usage instructions.
Product Usage Instructions
Without knowing the specific product, it is challenging to provide accurate usage instructions. However, I can offer some general guidelines for using most products:
- Read the User Manual: Start by carefully reading the user manual or instructions that came with the product. This will provide detailed information on how to use the product correctly and safely.
- Power Supply: Check if the product requires any power source, such as batteries or an electrical outlet. Ensure that you have a reliable power supply before using the product.
- Assembly: If the product requires assembly, carefully follow the provided instructions to assemble it correctly. Make sure to tighten any screws or connections securely.
- Operating Modes: Some products offer different operating modes or settings. Familiarize yourself with these modes and understand how to switch between them if applicable.
- Buttons and Controls: Identify the buttons, switches, or controls on the product. Refer to the user manual to understand their functions and how to operate them.
- Safety Precautions: Always prioritize safety when using any product. Follow any safety guidelines provided in the user manual, such as wearing protective gear or keeping children away from the product.
- Maintenance and Cleaning: Regularly maintain and clean the product as per the instructions in the user manual. This will ensure its optimal performance and longevity.
- Troubleshooting: If you encounter any issues or problems while using the product, refer to the troubleshooting section of the user manual. It may provide solutions to common problems or contact information for customer support. Remember, these are general usage instructions, and it is crucial to refer to the specific user manual or instructions for the product you are using.
Multifrequency Remote Control Duplicator
Technical parameters
- Transmit Mode :ASK
- The copy frequency error range: less than±200KHZ
- Working voltage: 6V
- Quiescent current: 0mA
- Working current: 18mA
Operating instruction
To remove the existing code: Press button 1 and 2 simultaneously until the LED flashes(approximately 5 seconds), release both buttons and all codes will be deleted.
To duplicate code:
-
Keep the original remote control near to remote control duplicator ( please note the range between them must be
2 cm-7cm not less than 2cm, otherwise it will affect duplicate, you can adjust the copy distance by yourself according to your actual copy effect ) -
Hold the original remote control button firstly (please note you need to do it firstly), then hold the remote control duplicator button (where you wish to duplicate the original remote control) until the LED flashes quickly, release both buttons and the code w ill have been accepted (please note if the original remote control is adjustable frequency, the duplicate time will be longer approximately 10 seconds, if the original remote controls have t wo waveband, it shows they can not be duplicated). If the L ED only flash once then go off during the duplicate process, it shows the system identification copy distortion then it will reset to duplicate automatically. Please do not release both buttons until the LED flash quickly at this moment.
If the LED flashes once then go off every 8 seconds during the duplicate process , it shows the remote control duplicator cannot recognize the original remote control frequency, so it can not be duplicated.
Code retrieval: If the code is inadvertently removed ,the previous code can be retrieved by pressing buttons 3 and 4 until the LED flashes. (approximately 5 seconds)
Battery status and replacement
While pressing the button to transmit, the LED remains ON instead of bilking, furthermore, it can not work with the receiver, which will notify you low battery status. So you need to replace 2 new pieces CR2016 battery.