SAN SOUND SANWEAR-GT Wireless Gaming Earbuds User Manual
- July 31, 2024
- SAN SOUND
Table of Contents
SAN SOUND SANWEAR-GT Wireless Gaming Earbuds
Before using SANWEAR, review the SANWEAR User Guide at sansound.com/pages/manual. Retain
Product Overview
Model: SNWR-GT
FCC ID-2BDBE-SANWRGT, FCC ID:2BDBE-SANSCGT, FCC ID:2BDBE-SANSYNC
Game Mode:
- Default mode optimized for gaming.
- Tap 3 times on either side to enable ‘Game Mode’.
Gestures and Controls
- Volume Up: Tap, then tap and hold on the right side.
- Volume Down: Tap, then tap and hold on the left side.
- Pause/Play: Tap once to pause or play your audio.
- Additional gestures can be customized through the SOUNDSCAPE app.
Parts of the SANWEAR
- Ear Tips: Different sizes for optimal fit and comfort.
- Microphone: Built-in microphone for calls and voice commands.
- Sport Hooks: Secure fit during physical activities.
- Charging Pads: Magnetic charging pads for easy and efficient charging.
Twist Fit Guide
Adjust the ear tips and sports hooks for the best fitment for your ears.
Light Indicators
- Exterior Case Light:
- Pulsing White: Full Charge
- Pulsing Red: Charging
Interior Case Light
- White: 67-100%
- Charged Blue: 34-66%
- Charged Red: 1-33% Charged
In-Ear Monitor:
- Flash Red + White : Pairing
- Flashing Red: Battery > 20%
- Pulsing Red: Charging
- White: Full Charge
Using the SOUNDSCAPE App
Download the SOUNDSCAPE app to unlock the full potential of your SANWEAR-GT headphones. Customize your audio experience, enable additional gestures, and access firmware updates through the app.
Note: The app is now called ‘SOUNDSCAPE’ and is available on both iOS and Android platforms.
Safety Information
To reduce the risk of fire or burns, do not disassemble, crush, puncture, or
dispose of in fire or water. Replace only with the specific type or equivalent
battery recommended by the manufacturer.
Battery and Charging
- Battery Composition: Lithium-ion
- Battery Life: Up to 33 hours on a full charge.
- To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose of in fire or
- water. Replace only with the specific type or equivalent battery recommended by the manufacturer. Batteries should be recycled or disposed of separately from household waste and according to local environmental laws and guidelines.
Environmental Information
SANWEAR by SAN SOUND is dedicated to reducing our environmental footprint. The
packaging of SANWEAR is designed to be recyclable. Contribute to a sustainable
future by disposing of the packaging responsibly. When it’s time to move on
from your SANWEAR device, don’t throw it in the trash. Dispose of it
separately by taking it to your local electronics recycling point. With little
effort, you can recycle valuable raw materials properly and safely.
Hearing Safety
Protect your ears and your hearing health. Avoid listening at high volumes for
extended periods. If symptoms like ringing in the ears or muffled speech
occur, reduce volume or consider taking a break.
Exposure to Radio Frequency
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Information
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Labelling Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Warning Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
European Union (CE Compliance)
SANWEAR conforms to the essential requirements and other relevant provisions
of Directive 2014/53/EU. For full details, refer to the CE marking on the
product or its packaging.
Other Regions
Please refer to local guidelines and regulations. Ensure you comply when
traveling or using the product abroad.
Contact Information
For support, warranty information, and other inquiries, please visit our
website at sansound.com or email us at
support@sansound.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>