Bekrvio BROAD Magazine Rack Installation Guide
- July 31, 2024
- BEKRVIO
Table of Contents
Bekrvio BROAD Magazine Rack
Assembly Instructions
-
Step 1
Attach the lower rack to the two side frames using four screws (A). Use the provided wrench (B) to tighten the screws. -
Step 2
Attach the upper shelf to the two side frames using four screws (A). Use the provided wrench (B) to tighten the screws. -
Step 3
Ensure all screws are tightened and the structure is stable. -
Step 4
Check the stability of the entire assembly and make any necessary adjustments.
Specifications
Part | Quantity | Image |
---|---|---|
Screws (A) | 8 | Image of a screw |
Wrench (B) | 1 | Image of a wrench |
FAQs
-
Q: What tools are needed for assembly?
A: Only the provided wrench (B) is needed for assembly. -
Q: How many screws are needed?
A: A total of 8 screws (A) are needed for assembly. -
Q: How can I ensure the structure is stable?
A: Make sure all screws are tightened properly and check the stability of the entire assembly after completing all steps.