BEKRVIO Gurla Wall Mounted Table Installation Guide
- July 31, 2024
- BEKRVIO
Table of Contents
BEKRVIO Gurla Wall Mounted Table
Components
- A. Perforated positioning paper for support
- B. Table board
- C. Support bracket
- D. Expansion tube
- E. Expansion screws
Installation Steps
DO NOT install on hollow walls
Determine the Height of B
Mark the three screw holes of B corresponding to the holes on the wall, drill holes at the marks (Deeper than E), tap expansion tube D.
Install B
Screw E into D, then fix B on the wall.
Install C
Mark four drilling positions with A, and drill holes in the four positions (Deeper than E), then screw in E screws. Press the brackets inward to fold the table, pull out to open the table.
FAQ
- Q: Can this table be installed on hollow walls?
- A: No, this table should not be installed on hollow walls.
- Q: How do I determine the height for the table board?
- A: Mark the three screw holes of the table board corresponding to the holes on the wall, then drill holes at the marks.
- Q: What should I do if the screws do not fit properly?
- A: Ensure that the holes are drilled deeper than the length of the screws and use the provided expansion tubes.
- Q: How do I fold and open the table?
- A : Press the brackets inward to fold the table, and pull out to open the table.
COMPONENTS
INSTALLATION STEPS
- Determine the Height of B
- Mark the three screw holes of B corresponding to the holes on the wall, drill holes at the marks (Deeper than E), tap expansion tube D.
- Install B
- Screw E into D, then fix B on the wall
- Install C
- Mark four drilling positions with A, and drill holes in the four positions (Deeper than E), then screw in E screws.
Press the brackets inward to fold the table, pull out to open the table.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>