septentrio AsteRx SB3 Ruggedized GNSS Receiver Installation Guide
- June 3, 2024
- septentrio
Table of Contents
septentrio AsteRx SB3 Ruggedized GNSS Receiver
Release Notes and Installation Guide
AsteRx SB3 ProBase Firmware Package v4.12.4
Installation Guidelines
This is the ˝rst release of the ˝rmware for the AsteRx SB3 ProBase. The receivers shipped from Septentrio come with this ˝rmware pre-installed.
Known Issues and Limitations
- When con˝guring the receiver to broadcast or multicast data (e.g. SBF, NMEA) over UDP, on the “Ethernet over USB” network interface, the data is transmitted twice. Unicast UDP and other network interfaces are not a˙ected by this.
- It is not possible to upgrade the receiver using mobile Safari on iOS devices.
- If more than one user simultaneously changes settings via the web interface, the resulting con˝guration of the receiver may not be consistent.
- The web server on the receiver has been tested with Chrome, Firefox and Microsoft Edge. If you experience any problems with your browser, please use a di˙erent client application.
- IPS connections may stay visible in the web interface after the client has been disconnected.
- The NTRIP server connection is sometimes not reliable when connected to a caster running “Professional Ntrip Broadcaster” (up to v2.0.22).
- Firewall on computers can delay accepting connection by up to 4 minutes. Before using IPR functionality ensure that the desired IP port is enabled on your computer.
- The generation rate of GBS and GRS NMEA sentence is limited to 1 Hz.
- When accessing the webUI over HTTPS, occasional CPU overloads can be detected.
Support
For further information or support, please consult the Septentrio support website (http://www.septentrio.com/support).
Legal Notice
Septentrio does not authorize the use of its products as critical components
in devices or systems intended for safety-of-life applications or in devices
or systems, of which the failure may endanger life or cause injuries, unless
written approval is given.
All the ˝rmware and documentation delivered with the AsteRx SB3 ProBase
Firmware Package is licensed, as explained in the About page which is
accessible via the web interface of the receiver.
System Components and Versions
Product: AsteRx SB3 ProBase
Version: 4.12.4
Receiver Platform: GRB0053
Release Date: 13 June 2022
| ****
version
| AsteRx SB3 ProBase-4.12.4-failsafe.suf| AsteRx SB3 ProBase-4.12.4.suf
---|---|---|---
Failsafe| 12.0.4-ge3f94ac| Y|
Operating System| 12.0.4-ge3f94ac| | Y
GNSS Firmware| 6.12.8-ge25b2a7513| | Y
Antenna Information| 2.14.0-gc29b2898f4| | Y
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>