septentrio AsteRx-m3 ProBase Firmware Package v4.10.0 Installation Guide

Asterix-m3 ProBase Firmware Package v4.10.0
Installation Guide

Installation Guidelines

In order to upgrade the 1rmware to version 4.10.0, only the following 1le is to be installed on the receiver:

There is no need to install the file AsteRx-m3 ProBase-4.10.0-failsafe.suf, unless Septentrio Support advises otherwise.

New Features and Improvements

2.1 New features in version 4.10.0

1. The satellite timing system used for the positioning is now selected automatically by default. GLONASS cannot be used.
2. A second independent PPS output is now available.
3. IP over USB is now available.

2.2 Improvements in version 4.10.0

1. BeiDou Phase III signals (B1C and B2a) are now encoded in RTCM3 MSM according to the second addendum to the RTCM version 3.3 standard.
2. The NMEA talker ID for BeiDou has been changed from BD to GB in accordance with the NMEA version 4.11 standard.
3. Login with Ed25519 SSH keys is now supported.
4. An issue related to an invalid UTC time 1eld at the startup of the receiver in the NMEA interface has been resolved.
5. The decoding of Galileo ephemerides at cold startup has been improved.
6. TLS 1.3 is now supported.

Known Issues and Limitations

1. It is not possible to upgrade the receiver using mobile Safari on iOS devices.
2. If more than one user simultaneously changes settings via the web interface, the resulting con1guration of the receiver may not be consistent.
3. The web server on the receiver has been tested with Chrome (version 61), Firefox (version 55), and Internet Explorer (version 11). If you experience any problems with your browser, please use a different client application.
4. IPS connections may stay visible in the web interface after the client has been disconnected.
5. The NTR IP server connection is sometimes not reliable when connected to a caster running “Professional Strip Broadcaster” (up to v2.0.22).
6. Firewalls on computers can delay accepting connection by up to 4 minutes. Before using IPR functionality ensure that the desired IP port is enabled on your computer.
7. The generation rate of GBS and GRS NMEA sentences is limited to 1 Hz.
8. When accessing the web over HTTPS, occasional CPU overloads can be detected.

Support

For further information or support, please consult the Septentrio support website (http://www.septentrio.com/support).

Legal Notice

Septentrio does not authorize the use of its products as critical components in devices or systems intended for safety-of-life applications or in devices or systems, in which the failure may endanger life or cause injuries unless written approval is given.
All the 1rmware and documentation delivered with the AsteRx-m3 ProBase Firmware Package is licensed, as explained on the About page which is accessible via the web interface of the receiver.

System Components and Versions

Product: AsteRx-m3 ProBase
Version: 4.10.0
Receiver Platform: GRB0053
Release Date: 18 June 2021| **** version| AsteRx-m3  ProBase- .10.0-failsafe.suf| AsteRx-m3 ProBase-4.10.0.suf
---|---|---|---
Failsafe| 9.0.2-g6e95581| Y|
Operating System| 9.0.2-g6e95581| | Y
GNSS Firmware| 6.10.2-g92d2286c1e| | Y
Antenna Information| 2.13.0-e47835c0| | Y

References

• Support | Septentrio

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>