SONOFF CAM Eyes ECAM Wi-Fi Smart Security Camera User Guide
- July 31, 2024
- SonOFF
Table of Contents
SONOFF CAM Eyes ECAM Wi-Fi Smart Security Camera
Download the eWeLink App
Power on
Insert the Type-C power cable, Once the device completes the rotational reset, it will enter the default Pairing mode for the first use. The device LED indicator will then flash in a red “short-short-long” pattern (if the LED indicator does not flash in this pattern, please press and hold the device button for 5 seconds to make the device enter the Pairing mode again).
Scan QR Code to Add Device
Open the eWeLink App and scan the QR code on the device, then follow the instructions given by the app to proceed.
Installation
This device can be placed on the desktop (Figure ) or installed on the ceiling (Figure 2).
User Manual
https://sonoff.tech/usermanuals
Enter the website provided above to view the User Manual for the device.
FCC compliance statement
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
This product is only suitable for safe use at altitudes below 2000m.
SAR Warning
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio
equipment type E-CAM is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet
address: https://sonoff.tech/compliance/
For CE frequency
- EU Operating Frequency Range
- Wi-Fi: 802.11 b/g/n20 2412-2472 MHz, 802.11 n40:
- 2422-2462 MHz 2414MHz-
- 2472MHz 5.15GHz-5.25GHz 5.725GHz-5.825GHz BT:
- 2402-2480 MHz EU
Output Power Wi-Fi
- 2.4G≤20dBm
- BT≤10dBm
- 5.15GHz~5.25GHz≤23dBm
- 5.725GHz~5.825GHz≤14dBm
BFWA (Broadband Fixed Wireless Access) members noted in blue -Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>