sanag A30S Pro, A30S Pro Max Bluetooth Headset User Guide
- July 31, 2024
- sanag
Table of Contents
A30S Pro, A30S Pro Max Bluetooth Headset
User Guide
A30S Pro, A30S Pro Max Bluetooth Headset
Thank you for choosing our bone corduction Bluetooth neodset for a beller experience Please read the instruction manual corefully before using this product. If there is any printing error or Trorslation errors hope that the majority of users understand
Overview of key features
- Volume increase / Next song: short press volume increase, long press one song
- Key on/multi-function keys: switch on/off, play pause, multi-function switching
- Volume decrease / previous song: short press volume decrease, long press previous song
- LED display lamp
- MIC
- Horn: air conduction sound generating unit
Charging use
When the earphone is under low voltage, the red light flashes once a second
and there is an alarm sound. At ch’s time, please connect the power adapter
The adapter charges the headset, otherwise the headset will automatically shut
cown when the power of the headset is too low.
The earphone is charged through a magnetic charging wire. After the charging
is completed, the working indicator changes from red (steady on) to blue
(steody on). Note: “Please use D DC 5V power adapter that meets rational
standards and hos passed CCC certification for charging”
Bluetooth pairing
First boot pairing:
In the off sta.e, lorg press the multi-function button for 2 secords, the blue
light is always on for 1 second, the red/blue light alternately flashes, the
headset is turned on and directly enters the pairing search mode, tl’e power
is accompanied by a prompt sound, and the mobile phone or smart electronic
device is turned on, from Bluetocin in the is find Sanag A50S Pro / A50S Pro
Max” and click Connect.
Key operation
Headset on:
In the off state, press and hold the multi-function button for 2 seconds, the
blue light is always on for 1 second, the red/blue light flashes allternately,
and the headset is tumed on with a beep.
Headset off:
When the headset is tumed on, press and hold the multi-function button for 4
seconds, the red light will be on and then il will go oul, ond the headsel
will turn off. Accompanied by a beep.
Disconnection, over distance disconnection or equipment shutdown:
When the mobile phone and headset exceed the Bluetooth conrection distance,
the heaeset appears with a prompt tone, and the mobile phone and headset are
disconnected, Return to the Bluetooth connection ronge between the headset and
the mobile phone with in 3 minutes. The headset and the mobile phone can be
automatically connected. After 3 minutes, the headset enters the standby mode.
If it is not connectec after 5 minutes, the headset will automatically shut
down.
TF card mode or Bluetooth mode:
When the headset is on, double-click the on key, and the blue light flashes
once every 10 seconds to switch the TF card mode or Bluetooth mode,
accompanied by “Music” prompt tone
volume up
When the headset is on o call, short press the volume up key to continuously
‘ncrease the volume to the maximum, accompanies by a prompt tone
volume down
When the headset is talking, press the volume reduccion button and the volume
continues to decrease (the minimum tone), accompanied by a beep tone.
Music play/pause:
Snort oress the multi-function outtor, music play/pause, play status: blue
light flashes once in 5 seconds Pause status: blue light flashes once in 10
seconns.
Single loop/full loop:
Under the state of music, three strikes open kev, single cycle prompt “du” a
short note, all cycle Prompt “beep” wo times.
Answer/reject:
The first call comes in, short press the multi-function button to answer it,
Jong press the multi-function button to reject it.
Hang up during a call
Sort presse multi-function autton to hang up.
Next song button/volume up
In the music state, short press the volume up button and the volume continues
to increase. When it reaches the maximum, there will be a beea. Ploying
status, long press to switch to the next song
Previous song button/volume down
In the music state, short press the volume down button and the volume will
continue to decrease. When it reaches the mirimum, there will be a beep.
Playing status, lorg press to switch to the previous song
How to copy data
In any state, insert the data calle into the PC or mobile phone (wi: OTG
adapter) to read e LSB flash disk, and cop/the required songs or data lies to
the device.
Low voltage alarm/shutdown
Alarm: the red ligh: flashes once every second, accompan’ed by the alarm sound
“Please charge”. Power off. When the red light is on for 3 seconds, the
headset is turned off.
Matters needing attention:
When the phone is med on without connecting to an/moblephone, will qutor
clically turn off alter 5 miles.
Please fully crage product for the first
Hease doret diemortle or peromcefy this procuct for any reason, otherwise I
may couse fire ore electronic breakdown. To completely darrage the product
If the charging is completed, olease c’sconect me drarger from the device,
Dorot exceeo 2 hours.
Please doral if rowclo batteries make household garbage or disposal Imoroper
disposal a batteries Toy cause comegolf the battery coaches fre or exploons,
please follow local regubrions to dispose of this procuct, batten and other
accessories
The batten is rctallowed to oesassemoled acueezed or thrown to res severely
swoller, please do not cor linue to use The battery must not be exposed to
excessive heat.
Do not repair this aroc ict by yourself.
If consumers use a power adapts to drengo ney snould surenase e matening cowe
docroter that nas oeer certified by CCC and meers the stancoro.
Basic parameters
- weight: bare metal 25g
- headset type: Sports Bluetooth headset
- Rluetooth version. V 5.3
- charging input: DC 5V 120mAh
- transmission distonce: 10M
- product impedance: 16 0+ 10%
- earphone size (length, width and height): 13810641mm
- charging time: about 1.5 hours (it is better to charge more than 2 hours for the first timc)
- operating temperature: -20 °C to 70°C storage temperature: -20 °C to 70°C
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following twa conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation, Any Changes or
modifications not expressly approved by the party responsible for compliance
could vaid the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the Limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable prolection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>