dji RS 4 Pro Gimbal Stabilizer Instructions
- July 31, 2024
- DJi
Table of Contents
dji RS 4 Pro Gimbal Stabilizer
Specification
| Date | 2024.07.17 |
|---|---|
| Firmware | v01.03.00.00 |
| DJI Ronin Image Transmitter (RavenEye) Firmware: | v01.03.00.72 |
| DJI Ronin Tethered Control Handle Firmware: | v32.33 |
| DJI Ronin App iOS: | v1.8.0 |
| DJI Ronin App Android: | v1.8.0 |
| User Manual: | v1.0 |
What’s New?
- Added support for DJI SDR Transmission.
- Optimized the algorithm when the gimbal is upside down and recenters in FPV mode.
- Optimized gimbal performance.
- Optimized the hot swapping experience when using Canon cameras including the EOS 200D Mark II, EOS 800D, EOS 6D Mark II, EOS 80D, and EOS 90D.
- Optimized the recording experience after focusing several times using Sony cameras.
- Optimized Zcam camera control experience.
- Optimized the calibration experience when using single motor in Z mode.
- Optimized the battery level display when using a third-party accessory.
Notes:
- Make sure that the DJI Ronin app is the latest version when updating the firmware.
- Motor parameters are reset after updating firmware. Make sure to autotune the gimbal.
- Update the firmware using the DJI Ronin app by connecting the gimbal via Bluetooth. Do not disconnect the DJI Ronin app and the gimbal during the update process.
- Update the firmware for the DJI Ronin Image Transmitter using the DJI Ronin app by connecting the Image Transmitter via Wi-Fi. Do not disconnect the DJI Ronin app and DJI Ronin Image Transmitter during the update process.
- If the gimbal has a camera attached and is powered on while updating the firmware, make sure to protect the camera and lens as the motors will power off during the update.
- If the firmware update fails, restart the gimbal and retry
Customer Support
http://www.dji.com/rs-4-pro
Copyright © 2024 DJI All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>