soundcore B32 Beat Light LED Light Strip User Guide

soundcore B32 Beat Light LED Light Strip

INSTALLING

1. Spread through the light strip straight and power on to test whether it lights normally. Make sure to correctly connect the control box with the light strip.
2. Choose a dry, clean and smooth surface and wipe off the dust with alcohol prep pads.
3. Tear off the adhesive tape and paste the light strip on the chosen surface immediately. Avoid bending on the LED beads.
4. Press firmly to remove the air between the light strip and the surface. ST
5. Use the provided clips and screws to reinforce it if necessary.
6. Connect to the power adapter and then the power supply.

CONTROL BOX

SOUNDcORE APP

Download the Soundcore app to enhance your experience.

1. Check product informaiton;
2. Adjust and manage light patterns; Customize unique light effects;
3. Enter PartyCast mode to sync with your PartyCast-enabled speakers;
4. Bluetooth connection; Set the timer for the lights to automatically turn on and off.
5. Upgrade firmware.

SPECIFICATIONS

Important Safety Instructions

Read all the instructions before using the product, refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the product.

1. Store the product in a cool and dry place.
2. Do not store the product in a hot or humid environment.
3. This product should not be exposed to dripping or splashing or submerged in water.
4. Keep out of the reach of children.
5. Do not touch the product for a long time when powered on. Power ot and unplug the adapter when not used for an extended period of time.
6. Do not connect the rope light to the supply while it is in the packing or wound onto a reel.
7. Do not use the rope light when covered or recessed into a surface.
8. Keep away from any sharp objects. Do not open or cut or bend the rope light.
9. Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
10. The operating temperature should be between 0°C to 40°C.
11. Do not disassemble the product or make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, and system performance, and may void the warranty.
12. Do not leave or dispose of the product, including the batteries (battery pack or batteries installed) in both extremely low air pressure and extreme heat such as sunshine, fire, or the like.
13. Do not clean the product with harmful chemicals or detergents.
14. Misuse, dropping or excessive force may cause product damage.
15. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical Systems separate from each other.
16. Be avware the discharged battery may cause Tire Or smoke, tape the terminals to insulate themm.
17. Do not subject the product to mechanical shock, crushing, or cutting.
18. Do not short-circuit the product or be short-circuited by other metal objects.
19. Do not use any cell or battery which is not designed for use with the equipment.
20. Do not put fingers or hands into the product.
21. Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
22. Do not use the product that is damaged or modified. It may exhibit unpredictable behavior resulting in tire, explosion, or risk ot injury.
23. Do not connect the chain to the supply while it is in the packaging.
24. Replace tailed lamps immediately by lamps of the same type as delivered or of a type specitied by the manufacturer.
25. Have servicing performed by a qualified repair person using only identical replacement parts. Servicing is required when the apparatus has been damaged in any way: such as power supply or cord is damaged; liquid has been spilled or objects have tallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
26. Do not install this equipment near any heat sources or in a contined or building-in space such as a bookcase or similar unit, and remain in good ventilation conditions at an open site.
27. Only suitable for safe use in areas below 2000m above sea level. Suitable for safe use in tropical and non-tropical areas.
28. Attention should be drawn to the environmental aspects of battery disposal.
29. Protect the power supply or cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time.

Disposal

1. Disposal of a battery into tire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
2. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of tlammable liquid or gas.
3. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

WARNING: Use only power supplies/attachments/accessories specitied by the manufacturer. Use only adapters below by Dong Guan Royal Intelligent Co.,Ltd. according to different area.

1. Model(s) for US & Canada: BI24G-120200-AdU
2. Model(s) for JP: BI24G-120200-AdJ

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Do not touch the light strip when in mono-color mode. Doing so may lead to partially light off due to electrostatic discharge. You need to reset the light strip via the remote control or the control box. It is normal and within the expectation of the manufacturer. This product complies with the radio interterence requirements of the European Community.

Declaration of Conformity

1. Hereby, Anker Innovations Limited declares that the product type A3561 is in compliance with Directives 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com/products
2. Maximum output power: 11.63 dBm
3. Frequency band: 2.4G band (2.402GHz-2.480GHz)
4. Anker Innovations Limited
5. Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
6. Importers for EU and UK
7. ANKER TECHNOLOGY (UK) LTD
8. Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
9. Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany

Indoor use only. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection tacility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

GB Declaration of Conformity

This product complies with the radio interference requirements of the United Kingdom. Hereby, Anker Innovations Limited declares that the product type A3561 is in compliance with Radio Equipment Regulations 2017(RER 2017 (SI 2017/1206). The full text of the UK declaration of contormity is available at the tollowing internet address: https://www.soundcore.com/products

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interterence to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit ditterent from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmtul interference, and (2) this device must accept any Interference received, including interterence that may cause undesired operation.

RF Exposure Warning Statements

This equipment complies with FCC radiation exposure limits set forth tor an uncontrolled environment. This equipment shall be installed and operated with a minimum distance 2Ocm between the radiator & body. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA91/64Telephone: +1 (800) 988 7973 This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1 This device may not cause interference. (2) This device must accept any interterence, including interterence that may cause undesired operation of the devIce.

Radio frequency Exposure statement for LIC

This equipment complies with IC exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure conditions. This equipment shall be installed and operated with a minimum distance 20cm between the radiator & body.  The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use oft such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners.

Additional Legal Rights for Consumers

For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, it different, their country of residence, the benetits conterred by Soundcore’s Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights. For FAs and more information, please visit

Customer Service

1. 8-month limited warranty Litetime technical support Our warranty is additional to the legal rights consumers have buying this product.
2. service@soundcore.com
3. support.mea@soundcore.com(For Middle East and Africa Only)
4. support@anker.com (HA)
5. +1 (800) 988 7973 (US) Mon-Fri 6:15 – 17:00 (PT)
6. +44 (0) 1604 936200 (UK) Mon-Fri Mon-Fri 6:00 – 17:00 Sat-Sun 6:00 – 14:00 (GMT)
7. +49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00
8. 03 4455 7823 (HA) H – 9:00 17:00
9. +86 400 0550 036 (tE) HEHi 9:00 – 17:30
10. +82 02-1670-7098 (3)2-5 10:00 17: 00
11. +971 42463266 (Middle East & Africa) Sun-Thu 9:00 – 17:30 (GMT+4)
12. +971 8000320817 (UAE) Sun-Thu 9:00 – 17:30 (GMT+4)
13. +966 8008500030 (KSA) Sun-Thu 8:00 – 16:30 (GMT+3)
14. +965 22069086 (Kuwait) Sun-Thu 8:00 16:30 (GMT+3)
15. +20 8000000826 (Egypt) Sun-Thu 7:00 – 15:30 (GMT+2)

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong ANKER TECHNOLOGY (UK) LTD Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Deutschland GmbH Georg- Muche-Strasse 3, 80807 Munich, Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>