MagSafe KH88 5 in 1 Magnetic Suction Charging Bank Instruction Manual

MagSafe KH88 5 in 1 Magnetic Suction Charging Bank

Product Information

Specifications

• Model: XYZ-2000
• Power: 1200W
• Capacity: 1.5 liters
• Material: Stainless steel
• Dimensions: 10″ x 12″ x 8″

Product Usage Instructions

• Initial Setup
  Before first use, wash all removable parts with warm, soapy water. Wipe the base unit with a damp cloth and dry thoroughly before use.

• Filling the Kettle
  Open the lid of the kettle and fill it with water up to the desired level. Do not exceed the maximum capacity indicated on the kettle.

• Setting Temperature
  Use the temperature control buttons to set your desired temperature. The LCD display will show the current temperature setting.

• Boiling Water

• Press the power button to start boiling the water. The kettle will automatically shut off once the water reaches the set temperature.

• Pouring and Serving
  Once boiling is complete, carefully pour the hot water from the spout into your cup or teapot. Always handle hot water with caution.

Description

Parameters

• Name: 5-in-l magnetic wireless fast charge mobile power supply Capacity: lOOOOmAh
• Input: 5V-3A, 9V-2A(Type-C)
• Output: 5V-3A, 9V-2.22A, 12V-1.67A(Type-C)
  • 15W / lOW / 7.SW / SW (Wireless)
  • SV-3A, 9V-2.22A, 12V-1.67A(USB-C Cable) 5V-2.4A(Lightning Cable)
  • Watch 2.SW (Max)
• Total output: 5V-3A Max
• Size: 107″69.8″19.Smm
• Color: Black/white/Purple/gray
• Material: PC+ABS+ zinc alloy
• Product list: Mobile power supply x 1, manual x 1, data cable x 1

REMARK: When any two ports (including wireless charging) input/output at the same time, output.

Automatically turn off the fast charge mode (9V/12V) and enter the SV voltage output mode (Wireless charge automatically switches to Sw)

Note: The USB-C port comes with a cable to support Apple 15 fast charging, provided that you plug it in first
Port C (fast charging light is green) does not activate the premise of wireless charging.
If the simultaneous activation is Sw charging, the wireless charging light is blue.

Solution: You need to double-click the button to turn off the wireless charge and insert the USB-C again Fast charging with cable)

LED Status

• Green long on:
  • type-c input/output fast charging
  • USB-C Cable outputs fast charging
• Ice blue long light: 7.5W/10W/15W wireless fast charging
• Green/ice blue Blinking: Wireless FOO foreign body detection
• Long white light: power indicator

Activation Function Description

• When the machine enters the standby state, press once {within 0.5 seconds) the power indicator light will display the current power l, representing 25% of the power, and will enter the standby state again after the light is on for 30 seconds.
• When the mobile phone is charged to 0% of the mobile power supply, the mobile power supply will automatically shut down, and the LED display mode is off.
• Click the button: start the mobile power supply, turn off the light after the blue light flashes twice, keep the green light on for 3 seconds, and keep the ice blue light on to start the wireless charging function;
• Double-click the button to turn off the wireless charging function when the device is powered on. FOD foreign body detection

Long white light: power indicator

Charging Function Instructions

• l / 2/ 3/ 4 LED light color is white.
• When charging to the power bank, the LED is flashed to display the incremental battery capacity. Refer to the relationship between LED display and battery capacity.
• When all 4 LED lights are on, the product is fully charged.
• The charging function is working properly when the charger output is sv to l 2V.

Description Function Instructions

• Press the power button once to start the mobile power supply. When the mobile phone is connected to the power supply, the corresponding LED lights will be on for a long time, and the number of lights will decrease as the power becomes lower.
  When the battery voltage is lower than 3.1V, the last light flashes for low- power alarm.

• When the battery voltage is below 3.0:t When the voltage is O.lV, the output will stop, and the LED light will go out after discharging. When you unplug the phone to interrupt charging, the indicator light will be on for 30 seconds, then it will go out and enter the standby mode. Press the power button to start the mobile power and the power indicator is on, then the wireless charging output can help the device with wireless charging.

• Foreign object detection: when a foreign object is found during wireless charging, the green light flashes and the charging is stopped. The metal foreign object needs to be removed before charging.

Safety information

• Improper use may harm the battery and other parts;
• When using the power supply for the first time, the standard 5V -1A / 2A charger must be used to charge the power supply; Keep the power supply dry and ventilated;
• The power pack contains organic combustibles. If the power supply is not used correctly, it will break, leak, overheat and so on, which will permanently damage the battery. The power supply has built-in safety protection device;
• Do not collide or break, causing short circuit of power supply; Do not use the power near the fire or stove or the place with the temperature higher than 6O°C. Because the high temperature will melt the plastic shell;
• If put into water, the inside safety devices will be damaged and the power bank will stop working, or cause over-heating, fire even explosion;
• Don’t extrude the power bank with heavy objects; Improper adapter may cause over-heating, burn, or explosion;
• Any hidden danger, please stop using it immediately;
• Before using wireless charging, please ensure that there is no metal foreign matter between the mobile phone (including the mobile phone protective case) and the wireless charging.

Fcc

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 0 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Frequently Asked Questions

Q: Can I use the kettle to boil other liquids besides water?

A: It is recommended to only use the kettle for boiling water to maintain its performance and longevity.

Q: How do I clean the kettle?

A: Regularly descale the kettle by mixing equal parts of water and vinegar, boil the solution, and rinse thoroughly with clean water.

Q: Is the kettle cordless?

A: Yes, the kettle sits on a detachable base for cordless serving convenience.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>