Magsafe TE-QC1022 15W 3 In 1 MG Travel Wireless Charger User Manual
- May 15, 2024
- Magsafe
Table of Contents
Magsafe TE-QC1022 15W 3 In 1 MG Travel Wireless Charger
MVMT SW 3-IN-l MG TRAVEL WIRELESS CHARGER
User Manual
FEATURES
- Multi-functional fast wireless charging for compatible phones, AirPods and Apple Watch. Charge 3 devices at once. The charger will automatically identify the device and charge at the maximum wireless charging speed.
- Separately configure a 20W+ adapter to supply power for the entire charging base for fastest charging speed.
- Because our convenient design, the charging cables for AirPods and Apple Watch are hidden in the casing. The stand is perfect for a distraction-free workspace.
- The mobile phone wireless charging coil is smartly located away from the device’s heat source to improve the charging efficiency. It can be wirelessly charged in upright or landscape position, equally fast.
- Designed for AirPods and Apple Watch. The base is compatible with both new and old AirPods and allows for easy operation of your watch while mounted.
- Built-in magnetic isolation of the wireless charging coil, increases the effect of the magnetic attachment.
The electronic circuit is equipped with safety features; over-voltage protection, input over-current protection, output over-current protection, anti-ripple, short circuit protection, anti-electromagnetic protection and anti-static protection. Charge safer!
SPECIFICATIONS
- Product model QC1022
- Input 9V/2.22A, 12V/1.67 A & above (QC3.0/PD)
- Output iPhone (15W max)
- AirPods (SW max)
- Apple Watch (3W max)
- Dimensions L11.9″W3.1″ (L303W80 mm)
- MagSafe iPhone 15
- Compatibility iPhone 15 Plus
- iPhone 15 Pro
- iPhone 15 Pro Max
- iPhone 14
- iPhone 14 Plus
- iPhone 14 Pro
- iPhone 14 Pro Max
- iPhone 13 mini
- iPhone 13
- iPhone 13 Pro
- iPhone 13 Pro Max
- iPhone 12 mini
- iPhone 12
- iPhone 12 Pro
- iPhone 12 Pro Max
CAUTION
- Please check whether the charged device is compatible with the product voltage first.
- Before using the wireless charger, please check If there is a metal object covering the back of the phone. When there is a metal piece or material obstructing the back of the phone you want to charge, the wireless charger will start up the FOD foreign object detection function and the phone will not be charged normally.
- To ensure safety and efficiency, it is strongly recommended to use the original charging cable or a third-party certified charging cable to power the device.
- Only for indoor use and in dry environments, avoid using in high temperatures, humidity, and oily environments. Do not use when wet, and the product away from fire.
- Keep the product away from strong magnetic fields.
- Avoid placing It in reach of infants and children.
- Non-professionals are not allowed to disassemble and repair this product without authorization.
HOW TO USE
- Connect the power supply and the red light will turn on
- When charging, the white light is always on
- When metal foreign objects are placed in the wireless charging area or other errors occur, the red light flashes
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
DISCLA IMER
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AEW6-TE-QC1022
©2024 JME & Co. NYC, LLC. All Rights Reserved. MVMT and MVMT logo are
registered trademarks of JME & Co. Distributed by JME & Co. NYC, LLC, New
York, NY 10018 Designed in USA, Made in China
hello@jmeandco.com
