MagSafe T1 Magnetic Wireless Car Charger Instruction Manual

MagSafe T1 Magnetic Wireless Car Charger

Packaging Description

• Product Name: Magnetic Wireless Charging
• Power: 15W/10W/7.5W/5W
• Effective transmission distance: 1-6mm
• Product size: 61 61 31.8mm
• Charging interface: USB TYPE-C

Packaging list:

• Vehicle mount x 1. Instructions × 1,
• Data cable × 1.
• Car-mounted air outlet base (clip) × 1,
• Exquisite packaging box × 1

Functional Components

Specifications

1. Weight: 48.8g
2. Material: PC+ABS+tempered glass
3. Input voltage/current: 5V/3A, 9V/2A
4. Output power: 15W/10W/7.5W/5W
5. Charging frequency: 110K-205KHz
6. Charging distance: 0-6mm
7. Supporting specifications: Compliant with QI wireless protocol charging
8. Supports magnetic suction device models, iPhone 15 Series, iPhone 14 Series,iPhone 13 Series, iPhone 12 Series Other of wireless charging phones, such as iPhone 11 Series, iPhone XS Max, iPhone XR,iPhone X,iPhone 8,iPhone 8X, HUAWEI Mate 60 Series, Mate 50 Series, Mate 40 Series, Mate 30 Series,Mate 20 Series, P50 Pro, P40 Pro, P30 Pro, V40 Series, V30 Series,SAMSUNG GALAXY Series, S8-S20 Series, Note8-10 Series When supporting wireless charging for mobile phones, you can attach a magnetic pad on the back to use it normally.
9. Devices that do not support wireless charging require purchasing a wireless receiver that meets QI standards to charge.

Instructions for use

1. Connect the onboard wireless charging device to the compatible data cable during use.
2. Connect the USB end of the data cable to the rechargeable interface on the car (such as using a cigarette lighter charger or a QC3.0 compatible car charger, or using a car charger without fast charging, which may cause slow charging and other issues)
3. The device clamp can be used to clamp the air outlet end of the air conditioner, or other places that can be clamped can be placed to fix the bracket.
4. After the device is powered on with 5-9V DC power, the ambient light on the edge logo will turn ice blue. Place the phone in the magnetic induction area, and the device will firmly hold the phone. When the wireless charging phone is detected, the work indicator light will turn green. When the phone is removed, the light will turn back to ice blue; The product equipment has FOD detection function. When the equipment detects FOD foreign objects (such as metal patches, etc.), the light will flash red and green. Button control – When the button is pressed once, the light will switch to another color. The default color for the power on light is ice blue, and the button will switch to seven colors: blue, purple, red, orange, green, and yellow; Press and hold the mechanical button switch for 3 seconds to turn off the lights; You need to restart the light and lightly press the button to turn it on.
5. This device has overvoltage protection, over-temperature protection, magnetic field protection, and short-circuit protection. If the device encounters any abnormalities, it will automatically stop working.

Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperatures, humidity or corrosive environments to avoid damaging the device’s circuit

Thank you for using this product!

warranty card

*The above information is to be filled out by the seller

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>