XTREME XWC8-1022-BLK 10W Wireless Charger User Manual

: July 31, 2024
: Xtreme

Table of Contents

10W FAST
- MANUAL
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DOUBLE SIDED, ACCORDIAN FOLD, BLACK AND WHITE COPY

10W FAST

WIRELESS CHARGER

COMPATIBLE WITH 01 ENABLED
IOS & ANDROID SMARTPHONES

XWC8-1022-BLK
V1.1 0424
Package Contents:
10W Wireless Charger
3.28ft Micro USB Power Cable

855-999-8041 | www.xtremecables.com

MANUAL

PRODUCT INTRODUCTION

The Xtreme 10W Fast Wireless Charger is an intelligent product with a compact design which is compatible with 105 and Android smartphones with wireless charging capabilities.

Wireless Charging Works With: iPhone 15 Pro, iPhone 15 Pro Max, iPhone 15, Samsung Galaxy S24, Samsung Galaxy S24 Plus, Samsung Galaxy S24 Ultra, Google Pixel 8, Google Pixel 8 Pro, and more…

USB-C Port
Smartphone Placement
LED Indicator

APPLICABLE DEVICES

Any Qi compatible iOS or Android smartphone can be charged with the wireless charger. For maximum 10W charging, a USB-C power adapter with an output of at least 5V/2A or 9V/2A is required (not included)

Note: 75W is used for fast charging of most iOS devices.

OPERATING INSTRUCTIONS

1. Insert the USB-C end of the power cable into a USB-C power adapter (not included) as shown below.

Note: iOS devices are currently limited to a max of 7.5W charging capability for standard Qi enabled wireless chargers
2. Insert the USB-C end of the power cable into the USB-C port on the wireless charger. The LED indicator will flash blue and red one time then remain red to indicate power connectivity.

3. Place your smartphone device onto the center of the wireless charger. The smart LED indicator will slowly flash blue to indicate that the device is charging. For Android devices, the LED indicator will remain blue when the device is fully charged. For iPhone devices, the LED will not change.

SAFETY AND CARE INSTRUCTIONS

Failure to follow these safety instructions can lead to fire, electrical shock, personal injury, property damage or damage to this unit. Make sure to read this entire manual before initial Use.

Keep the unit away from heat sources and direct sunlight. Do not expose the unit to extremely high or low temperatures.
Use the product in a location with a temperature of 32°F -951.
Do not let the unit come in contact with water or any liquid. If it becomes wet, immediately unplug from the power source.
Do not handle the unit, USB cord, or wall charger with wet hands.
Do not let dust or other debris accumulate on the product and the wall charger.
Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
If you have an electrical device, such as a pacemaker, consult a physician before using this product.
Do not place magnetic cards or similar items near this product.
Be sure to use the specified power source and voltage.
Do not use a voltage converter/travel adapter.
Be sure the wall charger is inserted all the way into the electrical outlet. When not in use, unplug the wall charger.
Place the unit on a flat, sturdy surface during charging.
Keep the unit out of reach of children as this product is not a toy
Wireless chargers generate heat when charging, and the charger may temporarily stop charging if it gets too hot.
Do not dissemble, modify, or try to use for a non-intended purpose, and do not use if damaged or modified. Never insert objects other than the specified cables into the
Do not dissemble, modify, or try to use for a non-intended purpose, and do not use if damaged or modified. Never insert objects other than the specified cables into the product.
Consider tuning off your phones vibrating notifications during charging, as vibrations may cause your phone to shift position on the charger and stop charging.
Do not use abrasive cleaning solvents to clean the unit.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and y our body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC CAUTION

Any changes or modifications not expressly approved by the part responsible for compliance could void this user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two co nditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION:

To prevent damage to the phone or the charger:

Remove metal cases, or cases with any magnet/metal components, from phone before charging.
Do not place metal objects on the charger during charging.

NOTE:

Qi wireless chargeable phones with metallic looking finishes will charge normally. Very thick protective cases can obstruct charging. For effective charging it may be necessary to reposition the phone or remove the case.

ONE YEAR WARRANTY

Xtreme warrants its products for ONE YEAR against defects in manufacturing under regular consumer use with original receipt of retail purchase.

We believe in our products and want to provide you with a replacement, if needed, but we have to know about the problem while the product is still under warranty. If you discover a defect covered by this warranty, please contact us about receiving a replacement. In order to use the products warranty the customer must provide proof of the retailers receipt.

*Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect. if there is not a manufacturing defect, shipping and handling will be applied.

Xtreme’s warranty is limited to our products only. Our warranty does not cover the replacement or repair cost of any third-party accessory, electronic device or personal property.

For instructions about how to obtain warranty service for your product, please contact Customer Service at customerservice@xtremecables.com