Hotop S7 Plus RGB Monitor Light User Guide

July 31, 2024
Hotop

User Guide
RGB Monitor LightHotop S7 Plus RGB Monitor Light

S7 Plus RGB Monitor Light

Hotop S7 Plus RGB Monitor Light - FIG

Product Parameters

Model: S7 Plus
Material:Aluminum alloy +ABS
Rated voltage:5V Power:12W (max)
Lighting:LED+RGB LED
Color temperature:2800k-4500k-6500k
Ra: >90
Remote Control Input: DC5V1A
Remote Control Capacity:1000mAh
Working temperature:-10°C ~40°C
Working humidity:10%-90%

Monitor Light Operating instructions

Hotop S7 Plus RGB Monitor Light - overview

  1.  Main LED Light

  2. Light control button
    Click the button to turn on/off the power;Long press the button to adjust the brightness
    Click the button to change the color temperature.There are three modes: Cold, warm, medium white.Long press the stepless button to adjust the color temperature
    Long press the RGB button to activate RGB function.Double click to shift voice pick up mode/RGB mode. Under voice pick up mode, the RGB light flashes according the rhythm of voice Single click to shift functions under each mode.

  3. Gravity clamp

  4. TYPE-C input port

  5. RGB LED Light

Remote Control Operating instructions

  1. Press and hold on/off
  2. Pressand hold switchon/off monitor lamp.Click to switch the smile touch button to adjust brightness/color temperature
  3. Long press the RGB button to activate RGB function.Double click to shift voice pick up mode/RGB mode. Under voice pick up made, the RGB light flashes according the rhythm of voice. Single click to shift functions under each mode.

Hotop S7 Plus RGB Monitor Light - overview 1

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient  or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals