Disnep RS1702452714 Wireless Bluetooth Headphones Instruction Manual
- July 30, 2024
- Disnep
Table of Contents
Disnep RS1702452714 Wireless Bluetooth Headphones
Exterior layout
- Headphone: Right ear,
- Headphone: Left ear
- Battery indicator light: From top to bottom, indicating 100%, 75%, 50%, 25% battery
- Lanyard buckle: Can be worn with a portable lanyard
- Charging light: Flashing during charging, solid when fully charged
- Charging port: TYPE-C
- Touch button:
- Single tap (play/pause, answer/end call, reject call when long pressed during incoming call)
- Double tap (next track), triple tap (increase volume on master / decrease on slave)
- Long press (2s to summon Siri, 4s to power on, 4s to power off)
- Headphone indicator light: Flashing (pairing mode), off (connected successfully)
- Microphone
Bluetooth Connection Diagram
- When there are no obstacles, the maximum effective connection distance between the headphones and the phone does not exceed 10 meters.
- When you take out the headphones, the headphone indicator light flashes, indicating that the headphone Bluetooth is in pairing mode.
- Activate the “Search Bluetooth” function on your phone, please refer to the phone manual for correct operation.
- Select and click “Q.7” from the Bluetooth search list on your phone.
Note: When this device is connected to a phone or other Bluetooth electronic device, it uses wireless radio signals. However, this type of connection is not always stable and reliable in all situations. Therefore, in case of emergency, please do not rely solely on this device for communication.
Specifications
Product model | Q.7 |
---|---|
Bluetooth version | 5.2 |
Effective range | ≤ 10m |
Battery specifications | 350mAh lithium battery |
Supported protocols | A2DPAVRCP |
Charging function | Supports USB chargng I DC 5V adapter |
music playback time | About 3 hours (tested at 70% volume) |
Rated power | 5mw |
Speaker impedance | 320±15% |
Frequency response | 20hz-20khz |
Operating temperature | -10°C~45°C |
Note: The data provided in this manual is based on laboratory testing.
Actual usage may vary.
Lighting Conditions
Indicator light colors | Operational states |
---|---|
Headphone light flashing rapidly | Waiting for pairing |
Headphone light off | Connection successful |
Product Charging
- To charge this device: Use a TYPE-C charging cable to connect the product to a USB port on a computer, or you can use a 5V-1A power adapter for charging. If fast charging is required, please use a 5V-1A power adapter.
Safety Instructions
- Avoid exposure to direct sunlight, rain, and prevent severe vibrations, impacts, or compression.
- Store in an indoor environment with a temperature ranging from -10°C to 45°C and a relative humidity not exceeding 75%. Avoid contact with corrosive substances and keep away from moisture.
- Do not dispose of this product as ordinary household waste. Dispose of such waste at designated battery recycling points.
- The materials used are environmentally friendly and lead-free.
- This product is not suitable for children under 14 to use alone and must be used under adult supervision.
- This product complies with electronic standard GB8898, report number R0317120224S.
Note: Consumers shall bear all consequences of personal and property damage caused by their violation of the above warnings
Package Contents
- Bluetooth Earphones x 1
- Charging Cable × 1
- User Manual × 1
- Certificate of Compliance × 1
- Brand Label × 1
Friendly Reminders And Precautions
Friendly Reminders
- Please read the following content carefully before using this product.
- Improper usage or incompatible devices may damage your product or cause it to malfunction.
- Do not scratch the surface of this product with sharp objects. Avoid throwing, shaking, pressing forcefully, or attempting to disassemble the product.
- Ensure to fully charge the product at least once every three months when not in use for an extended period.
- Do not use chemicals or strong detergents to clean this product.
- After charging other devices, please promptly disconnect the connection cable to avoid draining the product’s battery.
Precautions
- Always check whether the voltage of the device being charged is compatible with this product.
- Avoid placing in water, extremely high or low temperature environments.
- Keep this product out of reach of children and refrain from allowing them to play with it.
- Do not forcefully dismantle or modify the product to avoid damaging its protective features, which may result in battery heating, ignition, or explosion.
- If any abnormal odors, excessively high temperatures (normal usage may generate heat but should not be hot to touch), or changes in shape occur during use, charging, or storage, immediately cease usage and contact the dealer.
- The user is responsible for any shortened lifespan or damage to the product due to incorrect usage or storage. This is not covered under warranty or manufacturer responsibility. Thank you for your understanding.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>