SIGNALFIRE IQSB-2XD-A2 IQ Battery Pack Owner’s Manual
- July 30, 2024
- SIGNALFIRE
Table of Contents
SIGNALFIRE IQSB-2XD-A2 IQ Battery Pack
Product Information
Specifications:
- Pack Size: 2 D-Cell Batteries
- Power Input: DC Power (10-30VDC)
Product Usage Instructions
Installing the IQ Battery Pack:
The IQ Battery pack replaces the blue Lithium battery pack and is installed
inside the Sentinel or A2 device.
Power Connection:
Connect DC Power (10-30VDC) to the screw terminals on the IQ battery pack for
operation.
Usage Precautions:
Ensure that the IQ Battery pack is used in a general-purpose area and not in
hazardous environments as it is not C1D1 rated.
Contact Information:
For technical support, contact SignalFire Telemetry at:
43 Broad St C-300
Hudson, MA 01752
Phone: 978-212-2868
Email: support@signal-fire.com
Revision History:
| Revision | Date | Changes/Updates |
|---|---|---|
| 1.0 | 6/30/17 | Initial release |
FAQ:
- Q: Can the IQ Battery Pack be used in hazardous locations?
A: No, the IQ Battery Pack is not C1D1 rated and should only be used in general-purpose areas.
Features
The SignalFire IQ Battery Pack has the following features:
- Complete battery with integrated battery charger
- Screw terminal connection for DC power input
- Regulated output voltage for Sentinel or A2 devices
- 2 “D-Cell” Batteries
- Used when DC Power is available
- General Purpose area use
- Provides battery backup
Specifications
- Pack Size: 2.75” tall × 3.0” wide x 1.5” deep
- Battery Capacity: 2.5 Amp/Hr
- Temperature range: -40ºC to +80ºC
- Power Input: 10 to 30 VDC (250mA Max current draw)
Connection to Sentinel or A2 Node
The IQ Battery pack replaces the blue Lithium battery pack and is installed
inside the Sentinel or A2. The IQ Battery pack is not C1D1 rated so if it is
used the C1D1 rating for the Sentinel is no longer valid.
DC Power (10-30VDC) must be connected to the screw terminals on the IQ battery
pack.
Technical Support Contact Information
SignalFire Telemetry
43 Broad St C-300
Hudson, MA 01752
978-212-2868
support@signal-fire.com
Revision History
| Revision | Date | Changes/Updates |
|---|---|---|
| 1 0 | 6/30/17 | Initial release |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>