CLATRONIC HL 3631 Ceramic Fan Heater Instruction Manual
- July 30, 2024
- CLATRONIC
Table of Contents
- CLATRONIC HL 3631 Ceramic Fan Heater
- Specifications
- Product Information
- Usage Instructions
- Instruction Manual
- Special Safety Precautions for this Appliance
- Overview of the Components
- Notes for Use
- Operation
- Setting the Temperature
- Overheat Protection
- Cleaning and Maintenance
- Technical Data
- Product Data Sheet
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CLATRONIC HL 3631 Ceramic Fan Heater
Specifications
- Model: HL 3631
- Date: 29.02.24
- Language: Deutsch, Polski, English, Magyarul, Nederlands, Italiano
Product Information
The HL 3631 is a versatile product designed for various applications. It includes components such as a handle and function controls for easy operation. The product comes with safety warnings and instructions for proper use and maintenance.
Usage Instructions
-
General Notes
Ensure all parts are easily accessible and keep small children away from packaging materials to prevent choking hazards. -
Application
Use the handle and function controls to operate the product effectively. Refer to the instruction manual for detailed guidance on usage. -
Cleaning and Maintenance
Use mild detergent and a soft cloth to clean the product. Avoid using abrasive cleaners. Regular maintenance will ensure optimal performance. -
Storage
Store the product in a dry and safe place when not in use to prolong its lifespan. -
Technical Data
Refer to the product data sheet on page 15 for detailed technical specifications. -
Warranty
For warranty claims and service, visit our service page at www.clatronic.de/service and follow the instructions for warranty processing. You will receive a shipping ticket via email after registration.
Instruction Manual
Thank you for choosing our product. We hope you will enjoy using the appliance.
Symbols in this Instruction Manual
Important information for your safety is specially marked. It is essential to
comply with these instructions in order to avoid accidents and prevent damage
to the appliance:
WARNING
This warns you of dangers to your health and indicates possible injury risks.
CAUTION
This refers to possible hazards to the appliance or other objects.
NOTE
This highlights tips and information.
General Notes
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt, and, if possible, the box with the internal packing. If you pass the appliance on to a third party, always include all the relevant documents.
- The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
- Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid), and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
- Always switch off the appliance and pull the mains plug out of the socket (pull the mains plug, not the cable) when you are not using the appliance, attaching accessories, for cleaning or in the event of a fault.
- Do not operate the appliance without supervision. If you leave the room you should always turn the appliance off. Remove the plug from the socket.
- The appliance and the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
- Do not repair the appliance by yourself. Always contact an authorized technician.
- Use only original spare parts.
- In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
WARNING
Do not allow small children to play with the plastic foil. There is a danger of suffocation.
Special Safety Precautions for this Appliance
You will find the following symbol with warning character on the appliance:
WARNING
In order to avoid overheating, do not cover the heater.
WARNING: Risk of Burns
- Some parts of the product can become very hot and cause burns. Avoid skin contact. Carry the appliance by the handle.
- Take special care when children and vulnerable persons are present.
- Do not place the heater immediately below a socket-outlet.
- Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- Do not use this heater if it has been dropped.
- Do not use if there are visible signs of damage to the heater.
- Use this heater on a horizontal and stable surface.
- Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
- To reduce the risk of fire, keep textiles, curtains, or any other flam-mable material a minimum distance of 1 m from the air outlet.
- Children younger than 3 years of age should be kept away from the appliance, unless they are supervised at all times.
- Children from the age of 3 and younger than 8 years of age may only turn the appliance on and off if they are supervised, or have been instructed with regard to the safe use of the appliance, and if they have understood the risks resulting from it, provided that the appliance has been placed and installed in its normal position of use.
- Children from the age of 3 and younger than 8 years of age may not insert the plug into the socket, may not regulate the appliance, may not clean the appliance and / or may not perform the mainte-nance by the user.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental ca-pabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Under no circumstances may the fan heater be used in rooms with explosive gas (e. g. petrol) or while work is being carried out with inflammable adhesives or solvents (e. g. when gluing or painting parquet, PVC etc.).
- Do not insert any objects into the fan heater.
- Ensure that a safety distance is maintained between the power cord and the housing.
- Do not use the fan heater in the open air.
- If the supply cord is damaged, it must be replaced by the manu-facturer, its service agent or similarly qualified persons in order to avoid a hazard.
Unpacking the Appliance
- Remove the appliance from its packaging.
- Remove all packaging material, such as foils, filling material, cable ties and cardboard packaging.
- Check the appliance for possible transport damage to avoid hazards. Do not operate a damaged appliance. Return it to the dealer immediately.
NOTE
There may still be dust or production residues on the appliance. We recommend that you clean the appliance as described under “Cleaning”.
Overview of the Components
-
Handle
-
Function control knob
-
Temperature control
-
Filter
-
Stand
-
Safety switch
-
Grille for heating elements
-
Indicator lamp
Notes for Use
Safety Switch
Your fan heater features a safety switch that disconnects the power supply in
case the appliance falls over. The safety switch prevents hazards caused by
overheating.
WARNING
Place the appliance on a smooth, horizontal and stable surface. Avoid carpets in ord
NOTE
The appliance turns on automatically once back in an upright position.
Connected Load
The appliance supports a power input of 1500 W.
- CAUTION: Overload
- When using an extension cord, it must have a cable cross-section of at least 1.5 mm².
- Do not use a multiple socket as this appliance is too powerful.
- Do not connect any other powerful devices to the same electric circuit.
Filter
There is a coarse filter at the back of the appliance. This collects the dust
and holds it in place.
Operation
Electric Connection
- Make sure the voltage of the appliance (see rating label) matches the mains voltage to be used.
- Set the function control knob to 0.
- Unwind the mains cable completely.
- Only connect the mains plug with a properly installed earthed socket.
Setting the Temperature
The thermostat constantly switches the fan heater on and off, thereby keeping the temperature at the desired level. Set the desired temperature as followed:
-
Set the temperature control to its highest setting.
-
Once the desired temperature has been reached, slowly turn the temperature control back, until the fan heater switches off audibly. The indicator lamp turns off.
NOTE
The audible position of the temperature control de-pends on the ambient temperature. -
The fan heater will then keep the desired temperature level.
CAUTION
When not using the appliance, disconnect the mains plug.
Oscillation
To achieve even heating or ventilation, the appliance is also equipped with
an oscillation function.
Use control positions 2 a to 2 d to switch on oscillation mode.
CAUTION
Never adjust the swiveling mechanism with your hand. The mechanism could be damaged.
NOTE
The appliance has a swiveling range of approx. 45 °.
Fan Operation
If you want to use the appliance as a fan, turn the function control knob to
the fan icon and turn the temperature control to the highest position.
End Operation
If you want to end the operation, set the function control knob to the
position 0. The indicator lamp turns off. Then disconnect the mains plug from
the socket.
Overheat Protection
The appliance features an overheat protection mechanism causing the device to switch off automatically in case of overheating.
- Set the function control knob to position 0 and pull the mains plug out of the socket.
- Let the appliance cool down for approx. 10 minutes before using it again.
NOTE
If the overheat protection mechanism causes the appliance to switch off again after a short period, this might indicate a defect.
- Switch off the appliance and disconnect it from the mains.
- Have the appliances checked by your dealer or our customer service.
Cleaning and Maintenance
WARNING
Always unplug the appliance from the mains before cleaning and wait until the appliance has cooled down.
Never immerse the appliance in water to clean it. This may lead to electrical shock or fire.
CAUTION
- Do not use wire brushes or other abrasive materials.
- Do not use caustic or scouring agents.
- Wipe away dust with a dry cloth.
- Flecks can be removed with a suitably damp cloth.
Dust on the Protective Grilles
Accumulation of dust on the protective grilles can lead to overheating.
- Remove the dust by careful brushing.
- Use the upholstery nozzle of your vacuum cleaner to remove the dust.
Cleaning the Filter
Open the filter cover on the back. Remove the filter. You can clean it under
running water.
CAUTION
Allow the filter to dry completely before reinserting it.
Storage
- Let the appliance cool down before putting it away!
- Wind the mains cable loosely.
- We recommend storing the appliance in its original packaging if you do not intend to use it for a long period of time.
- Always store the appliance out of the reach of children in a well-ventilated and dry place.
Technical Data
- Model:……………………………………………………………… HL 3631
- Power supply:……………………………………. 220 – 240 V~, 50 Hz
- Power consumption:…………………………………………….1500 W
- Protection class:…………………………………………………………..
- Net weight:……………………………………………….. approx. 1.5 kg
Notice of Directive Conformity
The appliance meets the European standards and directives in the current version at delivery:
- Low Voltage Directive (LVD) 2014 / 35 / EC
- Electromagnetic Compatibility (EMC) Legislation Direc-tive 2014 / 30 / EC
- RoHS-directive 2011 / 65 / EU & (EU) 2015 / 863
- Ecodesign-directive (ErP) 2009 / 125 / EC
- Commission Regulation (EU) 2015 / 1188
(Product Data Sheet see page 15 + 16)
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of elec-trical equipment in the
domestic waste.
Please return any electrical equipment that you will no longer use to the
collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of re-utilisation of
electrical and electronic equipment.
Information concerning where the equipment can be disposed of can be obtained
from your local authority. Your dealer and contractual partner is also obliged
to take back the old appliance free of charge.
Product Data Sheet
Model identifier | HL 3631 |
---|---|
Item | Symbol |
Heat output | Type of heat input, for electric |
storage local space heaters only
Nominal heat output| P nom| 1.5| kW| manual heat charge control, with
integrated thermostat| N.A.
Minimum heat output (indicative)| P min| ****
1.0
| ****
kW
| manual heat charge control with room and / or outdoor temperature feedback|
N.A.
Maximum continuous heat output| P max,c| ****
1.5
| ****
kW
| electronic heat charge control with room and / or outdoor temperature feedback| ****
N.A.
Auxiliary electricity consumption| fan assisted heat output| N.A.
At nominal heat output (fan motor)| el max| ****
1.487
| ****
kW
| ****
Type of heat output / room temperature control
At minimum heat output (fan motor)| el min| ****
0.991
| ****
kW
| ****
single stage heat output and no room temperature control
| ****
no
In standby mode| el SB| N.A.| kW| Two or more manual stages, no room
temperature control| no
| | | | with mechanic thermostat room temperature control| yes
---|---|---|---|---|---
| | | | with electronic room temperature control| no
| | | | electronic room temperature control plus day timer| no
| | | | electronic room temperature control plus week timer| no
| | | | Other control options
| | | | room temperature control, with presence detection| no
| | | | room temperature control, with open window detection| no
| | | | with distance control option| no
| | | | with adaptive start control| no
| | | | with working time limitation| no
| | | | with black bulb sensor| no
Contact details| Clatronic International GmbH, Industriering Ost 40, 47906
Kempen, Germany
N.A. = not applicable
Contact Us
Industriering Ost 40
47906 Kempen
Internet: http://www.clatronic-germany.de
E-Mail: info@clatronic.de
Made in P.R.C.
FAQ
Q: How do I clean the product?
A: Use a soft cloth and mild detergent to clean the product. Avoid abrasive cleaners.
Q: Where can I find technical specifications?
A: Refer to the product data sheet on page 15 for detailed technical information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>