DATREND MN-112c Automated ESU Analyzer User Guide
- July 30, 2024
- DATREND
Table of Contents
DATREND MN-112c Automated ESU Analyzer
Product Information
- Model: vPad-RFTM Automated ESU Analyzer
- Package Contents: MN-112c 6100-092 vPad-RF Quick Start Guide 2024-Feb-15 (x2)
Product Usage Instructions
-
Unboxing and Setup
Start by unpacking the vPad-RFTM Automated ESU Analyzer package. Check that all components, including the Quick Start Guide, are present. -
Power On
Connect the vPad-RF according to the guide provided. Power on the device by following the instructions in the Quick Start Guide. -
Calibration
Perform the initial calibration of the vPad-RF as outlined in the user manual to ensure accurate measurements. -
Testing
Follow the testing procedures specified in the user manual to evaluate the ESU Analyzer’s performance.
Frequently Asked Questions (FAQ)
-
Q: How often should I calibrate the vPad-RF?
A: It is recommended to calibrate the vPad-RF Automated ESU Analyzer before each testing session to maintain accuracy. -
Q: Can I use the vPad-RF for all types of ESU devices?
A: The vPad-RF is designed to work with a wide range of ESU devices, but it is essential to refer to the user manual for compatibility information.
Package Contents
- ESU ANALYZER (vPad-RF)
- POWER CORD (3000-xxx)
- USB CABLE (3140-391)
- SHORTING JUMPER x 3 (3220-600)
- TESTING CABLES (7200-570, 7200-572, 7200-574, 7200-575, 7500-430)
Using Instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>