Datrend Systems Inc D101 10.1 inch Quad Core 3G Calling Tablet Instruction Manual

Datrend Systems Inc D101 10.1 inch Quad Core 3G Calling Tablet

Specifications

• Main Chip: [Main Chip model]
• Display GPU: [GPU model]
• Operation System: [Operating System version]
• DDR: [DDR capacity]
• Built-in WiFi: Yes
• TP: [Touch Panel type]
• RTC (Real-time clock): Yes
• G-sensor: Yes
• Power Charger: [Charger specifications]
• Front   Camera: [Front camera specifications]
• Rear Camera: [Rear camera specifications]
• Dimensions: [Dimensions]
• Operational Temperature: [Temperature range]
• Multi-language Support: Yes

Product Usage Instructions

Power On

• To power on the device, press and hold the power button until the device starts up.

Basic Operation

• Use the touch screen to navigate through the device’s interface and apps.

Power Off

• To power off the device, press and hold the power button, then select the Power Off option on the screen and confirm.

Sleep

• The device will automatically enter sleep mode after a period of inactivity. Press the power button to wake it up.

Power Reset

• If the device becomes unresponsive, press and hold the power button for several seconds to perform a reset.

Screen Time Out

• The screen will automatically turn off after a set period of inactivity to conserve battery life. Simply press the power button to wake it up.

Inserting and Pulling out the Micro SD card

• Inserting: Carefully insert the Micro SD card into the designated slot.
• Pulling out: Gently push the card to release it from the slot and then remove it.

Battery

• Charging: Plug the DC charger into a wall outlet with AC 220V output, then connect the DC jack to the device. Allow the battery to charge fully before first use.

FAQ

Q: How do I change the language on my tablet?

A: After charging the battery, follow the on-screen instructions to select a language and a wireless network.

Q: How do I lock and unlock my tablet?

A: To lock, press the power button. To unlock, turn on the tablet, place your finger on the lock icon, and slide it to the unlock position.

Points for Attention

1. Do not use the player in exceptionally cold or hot, dusty, damp, or dry environments.
2. Do not allow the player to fall while using it
3. Please charge your battery when
   • A. The battery power icon shows an empty icon.
   • B. The system automatically shuts down and the power is soon off when you switch on the unit once again;
   • C. There is no response if you operate on any key
4. Please do not disconnect power abruptly when the player is being formatted or in the process of uploading or downloading. Otherwise, it may lead to an error in the program.
5. When this unit is used as a moving disk, the user shall store or export files in the proper file management operation method. Any improper operation method may lead to the loss of files, for which this Company will be held no liable.
6. Please do not dismantle this unit by yourself. If there is any inquiry, please contact the dealer.
7. There will be no separate notice in the case of any change in the functions and performance of this product.

Basic Operation

Power on

• In the shutdown state, long press button boots

Power off

• In the power-on state, long press the key for 3 seconds then pop-up device options, and select ” Power off ” for shutdown.

Sleep

• The machine is under normal operating conditions, Short press the power button, and Into hibernation, Now, the Screen will close. Short press the power button again, and Be able to resume normal mode.
• When the time is used this MID can enable this feature when To reduce power consumption.

Power reset

• If there is a shutdown to the player in the process of operation, you can turn off and restart the player by pressing the “reset” key

Screen time out

• If you do not contact the player within the set time and do not operate the button, the contact screen will be automatically turned off.
• In any state, short press the button for activation; Then skid the lock upwards to the green of spotted which will accomplish access to the upper interface.
• If it is necessary to deactivate the contact screen time-out function, you can set the [Screen time out] option under the [display] function into Never.

Using the Micro SD card

• After this unit is connected to the computer, you will find two moving disks.
• The first one is the built-in memory disk for this unit and the other is the disk for the Micro SD card.
• If no card is inserted, the second disk can not be opened. This unit supports the extension of the Micro SD card from 4GB to 512 GB.

Inserting and Pulling out the Micro SD card

Inserting:

Put the Micro SD card face up (side with words), and slightly force the card into the socket of the card, i.e. connecting the unit. Under this state, you can play the content on the Micro SD card.

Pulling out (extraction):

Slightly push the Micro SD, and it will bounce by a section, and then you can take it out.

Caution

Please perform inserting and pulling operations when the power is off! Otherwise, it will lead to the loss or damage to the files within the unit! If no card is inserted, the computer will be unable to perform the read-and-write operation for the disk notes of the later removable disk (Micro SD card)

Battery

• High high-capacity Polymer battery is used for this unit.
• The duration available of the battery power depends on volume, types of playing files, and operation of batteries.
• The player can be set up by the user as “user define power off time” or “display setup” to save batteries

Charging:

• This unit can be recharged by USB port, you can also use a DC Charger machine.
• Take out the DC charger, plug it into the wall outlet with AC 220V(output current 1500mA output voltage 5V~5.2V)), then plug in the DC jack into the device DC-in jack.

Warnings for charging

1. A new battery may be empty and not charged before you get the device.
2. If the device is not used for a long time, it is better to charge it to full capacity every 2 or 3 months during storage.

A power adapter is a key component of the portable player, which plays a crucial role in keeping the portable player’s normal work and protecting your security when using the player, long-term customer surveys and after-sales service Practice shows that the malfunction of the portable player In many cases was caused by using inappropriate accessories, in particular, the power adapter Use the substandard power adapter will shorten the life of the portable player by considerably, the voltage instability will seriously affect the normal work of the portable player and bring permanent damage to the player’s performance and reliability, Using the substandard power adapter will also reduce the vocal quality of the players, shutdown the player when you using it, In addition, Use the substandard power adapter will cause combustion and explosion which will disserve the safety of the consumers.

Setting up your tablet

• After charging the battery, press and hold the power button for up to 5 seconds until the pattern is displayed.
• IMPORTANT: If the battery image is not displayed on the screen, press the power button briefly to display the image, and then press and hold the power button until the logo is displayed.
• Follow the on-screen instructions to select a language and a wireless network.

Lock and unlock

• Lock—Press the power button.
• Unlock—Press the power button to turn on the tablet, then place your finger on the lock icon and slide the icon to the unlock position

Turn off the tablet

• Press and hold the power button, touch Power off, and then touch OK. If your tablet becomes unresponsive, press and hold the power button for several seconds to turn off the tablet.
• All apps—Displays a list of all apps installed. To confirm you’re your preferences, touch, and then touch
• Back—Opens the previous screen.
• Home—Opens or returns to the Home screen.
• Recent apps—Opens a list of apps used recently.
• NOTE: The appearance of the Home screen may vary.
• Google Search—Allows you to type one or more keywords to search.
• Voice search—Allows you to speak one or more keywords to search with the installed search app.
• The search feature varies by model and country with the installed search app.

Use gestures

The following gestures can be used with your tablet:

Organize the Home screen

• To add an app or a widget to the Home screen, touch the Apps tab or the Widgets tab, and then tap and hold an app or widget until it is added to the Home screen.
• To remove an app or widget from the Home screen, drag it to the X at the top of the screen.

Change your tablet’s view

• The Auto-rotate feature allows you to change your tablet’s view. For landscape view, hold the tablet horizontally. For a portrait view, hold the tablet vertically.
• NOTE: Some apps do not rotate automatically.
• To change the Auto-rotate setting, swipe down from the top of the screen to display notifications, and then touch the Screen rotation icon to lock or unlock the screen rotation.

Return to the Home screen

To quickly return to the Home screen, touch

Display apps, widgets, and notification

• Apps—Touch and then touch the Apps tab to see a list of all apps.
• Widgets—Touch  and then touch the Widgets tab to see a list of all widgets.
• Notification—Swipe down from the top of the screen to see your notifications.

Back up your data

• Strongly encourages that you periodically back up your data and media on your tablet to another computer, a dedicated storage device, or to the cloud using one of several commercially available solutions.

Specification

General| Main Chip| MT6797（X20) Deca-Core ,GPU:T880 780MHz ,64-bit ten- core processor ,two A72 2.1GHz,four A53 1.85GHz four A53 1.4GHz
---|---|---
Display| 10.1 inch 12001920 FHD
GPU| GPU: T880 780MHz
Operation system| Android 8.0 GMS
DDR| 3GB+32GB
Built-in WiFi| 4-8 Hours of video playtime
TP| COB 2.5D G+G GSL1680F 26 channels
RTC(Real-time clock)| Yes
G-sensor| Yes
Power Charger| 5V 2A
Front| 2.0 rear Camera
Rear| 5.0 rear camera
Dimensions| 240.8167.5*8.7mm
connection| 802.11 a/b/g/n/ac BT
Operational

Temperature

| -5~20
Language| Multi-language| English, Arabic, Chinese, Russian, French, German, Spanish, Indian, etc.
Power supply| Battery| 6000mah
Compatible format| Video| Supports MPEG4-SP, H.264/AVC,H.263,3GP,3G2,MP4,MKV,AVI,WEBM

etc.

Music| Supports MP3,MP2, AMR,AWB,APE,M4A, MIDI, OGG,WAV,FLAC,3GP

(Need Licence: AAC, WMA) etc

Photo| Supports JPG, BMP, GIF, and PNG photos
Ebook| Support PDF, TXT, EPUB, etc.e-book format

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

5G WiFi IC Statement

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>