anko 43398225 Pet Elevated Bed with Canopy Instruction Manual
- July 30, 2024
- Anko
Table of Contents
anko 43398225 Pet Elevated Bed with Canopy
Pet Elevated Bed With Canopy
Contents
A. Long rail x 2 pcs| B. Short rail x 2 pcs| C. Poles x 6 pcs|
D. Legs x 4 pcs
---|---|---|---
E. Connectors x 4pcs| F. Mat x 1 pc| G. Canopy x 1 pc|
WARNING:
Do not place fabric near a fire or open flame.
For your pet’s safety, inspect regularly and remove if damaged.
Always supervise your pet during play.
Ensure the product is tightened and secure prior to letting your pet use it.
Maximum loading : 30kgs
Assembly Instructions
Step 1.
Insert the longer side rails (A x 2 pcs) through the pockets on the long side
of mat F.
Insert one of the short side rails (B x 1 pcs) through the pockets on the
short side of mat F.
Step 2.
Connect one of the legs (D x 1 pc) to the long rail (A x 1 pc) and the short
rail (B x 1 pc). Make sure both rails are reaching the end of the hole in the
legs.
Step 3.
Repeat step 2 for the remaining legs and use the last long rail (A x 1 pc) to
connect the legs.
Close and fasten the hook and loop. Note: make sure none of the black hook and
loop is showing.
Step 4.
Connect 2 of the poles (C x 2 pcs) by using the connectors (E x 2 pcs). Put
this through the canopy diagonally. Refer to images below:
Step 5.
Repeat Step 4 for the remaining poles and connectors. Insert the poles into
the provided holes in the legs. Refer to image below:
Step 6.
Attach the hooks from the canopy onto the 4 legs. Refer to image below:
WARNING:
For your pet’s safety, inspect regularly and remove if damaged.
Always supervise your pet during play.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>