CALEX IP65 Garden Spotlight on Skewer Instruction Manual
- July 29, 2024
- CALEX
Table of Contents
CALEX IP65 Garden Spotlight on Skewer
Parts Lists
| 1 x Light Fixture | 1 x Ground Spike | 2 x Wall Plugs | 2 x Screws |
|---|
Installation Instructions
Wall Mounting
-
Step A1
Disassemble the light fixture by unscrewing the front part. -
Step A2
Insert the GU10 bulb (max 5W) into the light fixture. -
Step A3
Reassemble the light fixture by screwing the front part back on. Ensure the fixture is rated IP44 or IP65. -
Step A4
Mark and drill two holes (6mm diameter) in the wall where the fixture will be mounted. -
Step A5
Insert the wall plugs into the drilled holes and attach the mounting plate to the wall using screws. -
Step A6
Attach the light fixture to the mounting plate and connect the input to 230V AC.
Ground Mounting
-
Step B1
Disassemble the light fixture by unscrewing the front part.
Step B2 -
Insert the GU10 bulb (max 5W) into the light fixture.
Step B3
-
Reassemble the light fixture by screwing the front part back on. Ensure the fixture is rated IP44 or IP65.
-
Step B4
Attach the ground spike to the light fixture. -
Step B5
Insert the ground spike into the ground. For hard surfaces, drill a hole and insert a wall plug before inserting the spike. -
Step B6
Connect the input to 230V AC.
Specifications
| Parameter | Details |
|---|---|
| Bulb Type | GU10 |
| Max Wattage | 5W |
| Input Voltage | 230V AC |
| IP Rating | IP44 or IP65 |
FAQ
What type of bulb does this fixture use?
This fixture uses a GU10 bulb with a maximum wattage of 5W.
What is the input voltage required for this fixture?
The fixture requires an input voltage of 230V AC.
Can this fixture be used outdoors?
Yes, the fixture is rated IP44 or IP65, making it suitable for outdoor use.
How do I mount the fixture on a wall?
Follow the wall mounting instructions provided in the installation guide. Mark and drill holes, insert wall plugs, attach the mounting plate, and then attach the fixture.
How do I mount the fixture in the ground?
Follow the ground mounting instructions provided in the installation guide. Attach the ground spike to the fixture and insert it into the ground. For hard surfaces, drill a hole and insert a wall plug before inserting the spike.
Electro Cirkel Retail B.V.
Lyonstraat 29, 3047 AJ Rotterdam, The Netherlands
WWW.CALEX.EU