Pioneera In-Dash Navigation AV Series Receivers Instructions

Pioneer In-Dash Navigation AV Series

Specifications:

• Models: AVH-Z9150BT, AVIC-Z910DAB, AVIC-Z710DAB, AVH-Z9200DAB, AVIC-Z920DAB, AVIC-Z720DAB, AVIC-Z930DAB, AVIC-Z730DAB
• Regions: Australia & New Zealand

Product Usage Instructions

Checking the Firmware Version:

1. Press the HOME button to display the Top menu screen.
2. Touch the following keys : System -> System Information -> Firmware Information
3. Check the firmware version number displayed.

Downloading Firmware Update Files:

1. Visit Pioneer’s website link provided.
2. Find your product in the table and download the corresponding firmware update file.
3. Extract the downloaded zip file to obtain the updated folder.

Updating the Firmware:

1. Connect a blank SD memory card or USB storage device to your computer.
2. Copy the correct update file onto the SD card or USB device.
3. Insert the SD card or connect the USB device to the unit.
4. Turn off the source on your unit.
5. Press HOME -> System Information -> Firmware Update.
6. Touch [Continue] to initiate the update.

FAQ:

• Q: How do I know if my unit needs a firmware update?
  • A: Check the firmware version by following the steps provided in the user manual under “Checking the firmware version on your unit.”
• Q: What should I do if I encounter issues during the firmware update?
  • A: If you experience any problems during the update process, contact Pioneer Technical Support via their website for assistance.

This firmware update applies only to the following models of Pioneer In-Dash AV Receivers sold in Australia & New Zealand.

AVH- Z9150BT

AVIC- Z910DAB
AVIC- Z710DAB
AVH- Z9200DAB
AVIC- Z920DAB
AVIC- Z720DAB
AVIC- Z930DAB
AVIC- Z730DAB

IMPORTANT

Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and, in the order described below.

Note: If you have any questions, please contact the Pioneer Technical Support team via our website at https://www.pioneer.com.au/contact-us/, Monday through Friday, 9:00 AM – 4:30 PM (excluding holidays).

In order to perform this update, the following items are needed:

• Pioneer In-Dash Navigation AV Receiver or Multimedia DVD receiver listed above;
• Blank (does not contain any files) SD memory card or USB storage device 2 GB or larger in capacity, formatted to FAT32

CAUTION

• DO NOT turn your unit off, eject the SD memory card or disconnect the USB storage device while the firmware is being updated.
• You can only update the firmware when the vehicle is stopped, and the parking brake is engaged.

IMPORTANT (For navigation system users)

• When this firmware update is installed, all navigation function settings will be reset, and saved data will no longer be available. Once the update has finished, you will need to reconfigure the settings.
• Any content purchased and added through Naviextras will also need to be re-installed. Note that no charges will be incurred to download previously purchased content.

Checking the firmware version on your unit

Check whether the firmware of your unit needs to be updated by checking the version number of the firmware.

Procedure

1. Press the HOME button to display the Top menu screen.
2. Touch the following keys in the following order.
   • The “System” screen appears
3. Scroll down the list.
4. Touch [System Information].
5. Touch [Firmware Information].
6. After the “Firmware Information” screen appears, check the firmware version number.

Downloading the firmware update files from Pioneer’s Website

1. Download the firmware update files by clicking on the following link and finding your product:

(See the table below)

https://www.pioneer.com.au/firmwaresoftware/

Model Name

| Update is necessary

when

| File Name| Version
---|---|---|---

AVH- Z9150BT

| The current version is Lower than

1.08

|

18MY_FW-Update_v1_080100_AVH.zip

|

1.08

AVIC- Z910DAB

| The current version is Lower than

1.06

|

18MY_FW-Update_v1_06_AVIC.zip

|

1.06

AVIC- Z710DAB

AVH- Z9200DAB

|

The current version is Lower than

1.07

|

19MY_FW-Update_v1_070100_AVH.zip

|

1.07

AVIC- Z920DAB

| The current version is Lower than

1.07

|

19MY_FW-Update_v1_070100_AVIC.zip

|

1.07

AVIC- Z720DAB

AVIC- Z930DAB

| The current version is Lower than

1.06

|

20MY_FW-Update_v1_060100_AVIC.zip

|

1.06

AVIC- Z730DAB

Extract the download file.
The downloaded zip file will produce the following folder when decompressed: (See the table below)

Updating the firmware on your Unit

IMPORTANT

AVH-Z9150BT

AVIC-Z910DAB
AVIC-Z710DAB
AVH-Z9200DAB
AVIC-Z920DAB
AVIC-Z720DAB
AVIC-Z930DAB
AVIC-Z730DAB

•   DO NOT perform this firmware update if the model number of your Pioneer product is anything other than one of the above models.
•  Ensure that the update file is located within the root (top) folder of your SD memory card or USB storage device. There should be no other files on the SD memory card or USB storage device
• While your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the unit’s touchscreen as this may result in severe damage to your unit.
• DO NOT remove the SD memory card or USB storage device during the firmware update process.
• Performing the firmware update wil l restore all settings to their default values.
• Disconnect any external mobile devices that are currently connected to your unit before starting the  update

Updating the firmware on your Unit

Procedure

1. Connect a blank (formatted) SD memory card or USB storage device to your computer, then locate the correct update file and copy it onto the SD memory card or USB storage device.
2. Insert an SD memory card into the SD card slot or connect the USB storage device to the USB port.
3. Turn the source off on your unit
4. Press the HOME button to display the Top menu screen.
5. Touch the following keys in the following order
   • The “System” screen appears.
6. Scroll down the list.
7. Touch [System Information].
8. Touch [Firmware Update].
   • The “Firmware Update” screen appears.
9. Touch [Continue] to display the data transfer mode.
   • Wait for file check to complete
10. Touch [Start].
    • Progress status is shown
11. Wait until the update process is complete. Once the firmware update process is complete, the unit will display the “Update Complete” screen.
12. Press the HOME button.
13. Remove the SD memory card or USB storage device.
14. The firmware update is complete.

Verify that the firmware has been updated

Please refer to “Checking the firmware to verify that the firmware has been updated
If you have any difficulty performing these instructions, please contact the Pioneer Technical Support team via our website at https://www.pioneer.com.au/contactus/us/, Monday through Friday, 9:00 AM 4 :30 PM (excluding holidays).
Copyright 20 24 Pioneer Corporation

References

• Contact us - Pioneer
• Firmware & Software - Pioneer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>