LANDMANN 82442 8 Feet Firewood Rack with Cover Instruction Manual
- July 27, 2024
- LANDMANN
Table of Contents
LANDMANN 82442 8 Feet Firewood Rack with Cover
Specifications
- Product Name: 8 Ft. Firewood Rack with Cover
- Model Number: 82442
- Assembly Time: 20 minutes
- Material: Steel
- Country of Origin : China
Product Usage Instructions
READ FIRST! RULES FOR SAFE USE
- USE THE FIREWOOD RACK ONLY ON FLAT SURFACES.
- THE FIREWOOD RACK IS RECOMMENDED FOR USE ON A HARD SURFACE SUCH AS A CONCRETE PATIO OR GRAVEL.
- CAUTION! IF USED ON AN UNSTABLE SURFACE, THE FIREWOOD RACK MAY TIP OVER.
- CAUTION! DO NOT DROP OR SLAM WOOD IN THE FIREWOOD RACK.
- CAUTION! DO NOT MOVE THE FIREWOOD RACK ONCE WOOD HAS BEEN LOADED.
Assembly Instructions
For easiest assembly, follow the assembly steps in this order.
A Phillips screwdriver and an adjustable wrench are needed for assembly.
Assembly time: 20 minutes
For easiest assembly, follow these steps:
- Insert the the side frame legs [ AB ] into the side frames [ AA ] and assemble using (2) 1.6 IN. bolts [ J ], small washers [ K ] and small hexnuts [ L ] per leg. Assemble (2) side frame legs per side frame. Tighten bolts securely.
- STEP 2 Assemble the side frames and (6) bottom frames [ BB ] as shown inserting a cross bar [ C ] between each assembly point. Use (2) 3.1 IN. bolts [ D ], large washers [ E ] and large hexnuts [ F ] at each assembly point. Tighten bolts securely
- STEP 3 Place cover [ G ] on firewood and rack. Make sure the cover straps are securely tied around both the side frame leg [ AB ] and the bottom frame [ BB ]. The door flap has 6 straps. Tie these straps with the cover straps to keep the door flap closed.
Parts List
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| AA | SIDE FRAME | 2 |
| AB | SIDE FRAME LEG | 4 |
| BB | BOTTOM FRAME | 6 |
| C | CROSS BAR | 4 |
| D | 3.1 IN. BOLT | 16 |
| E | LARGE WASHER | 16 |
| F | LARGE HEXNUT | 16 |
| G | COVER | 1 |
| J | 1.6 IN. BOLT | 8 |
| K | SMALL WASHER | 8 |
| L | SMALL HEXNUT | 8 |
Thank you for your purchase of the 8 Ft. Firewood Rack with Cover. At Landmann USA, we strive to provide you with an easy to use, easy to assemble product. Should you have questions, issues, a defective part or if you have any questions concerning its use, please contact us at: customerservice@landmann- usa.com
1-800-321-3473 M-F 8-5 Eastern Time
Proof of purchase may be required.
Landmann® Limited
- Distributed by Landmann® USA
- Cartersville, GA 30120
- www.landmann-usa.com
- Made in China
- © 2012 Landmann USA
FAQ
Q: What tools are needed for assembly?
A: A Phillips screwdriver and an adjustable wrench are needed for assembly.
Q: How do I secure the cover on the firewood rack?
A: Place the cover on the firewood and rack, then make sure the cover straps
are securely tied around both the side frame leg and the bottom frame.
Q: How long does it take to assemble the 8 Ft. Firewood Rack with Cover?
A: The assembly time is approximately 20 minutes.
Q: Where can I get replacement parts for the Landmann 82442?
A: You can shop genuine replacement parts for Landmann 82442 through Appliance
Factory Parts.
Q: What is the recommended surface for placing the firewood rack?
A: It is recommended to place the firewood rack on a hard surface such as a
concrete patio or gravel.
References
- USA Location information - USA.com
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Landmann Fireplace Parts - Select From 49 Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>