Marshall Major V Bluetooth Headphones User Guide

Marshall Major V Bluetooth Headphones

Product Specifications

• Customizable M-Button for music control
• LED indicator for status display
• Control knob for music and call management
• Wireless charging capability
• 3.5mm AUX input/output for connectivity
• USB-C power input for charging

Product Usage Instructions

DEVICE LAYOUT

1. CUSTOMISABLE M-BUTTON
   Push the M-button to get the music started with Spotify Tap. The M-button can be customised in the Marshall Bluetooth app.

2. LED INDICATOR
   The LED shows the battery level while charging, red through orange to green (0–100%). It pulses blue while in Bluetooth pairing mode and white while searching for a device. The LED is steady white when connected.

3. CONTROL KNOB
   Use the Control knob, located on the right ear cup to control your music, phone calls and more.

4. WIRELESS CHARGING
   Charge the headphones by placing the right ear cup facing down on a wireless charging pad.

5. 3.5 MM AUX INPUT/OUTPUT
   Use the included 3.5 mm lead and connect to the analogue output of a sound device or plug in another set of headphones and listen together.

6. USB-C POWER INPUT
   Charge the headphones by plugging in a USB power source.

GETTING STARTED

1. Push and hold the Control knob until the LED turns to a slow blue pulse.
2. Select MAJOR V from your sound device’s Bluetooth® list.
3. Download the Marshall Bluetooth app and follow the in-app instructions to complete the setup.

CONTROL KNOB
Use the Control knob, located on the right ear cup to control your music, phone calls and more.

• Power on/off – push and hold for 1 second
• Play/pause – push once
• Skip backward/forward – push left/right
• Turn up/down the volume – push up/down
• Receive/end a call – push once
• Reject a call – push twice
• Bluetooth pairing, headphones are off – push and hold for 2 seconds
• Bluetooth pairing, headphones are on – push twice

Charging the Headphones
Use a wireless charger or plug the headphones into a USB power source. The LED indicator will turn steady green when fully charged. Use a wireless charger or plug the headphones into a USB power source to charge them. The headphones are fully charged when the LED indicator is steady green.

1. For wireless charging:
2. Place the right ear cup flat against the wireless charging pad.
3. Ensure the LED lights up to indicate charging.
4. Once the LED turns steady green, the headphones are fully charged.

To charge the headphones using a wireless charger, follow the instructions below.

1. Place the headphones with the right ear cup flat against the wireless charging pad.
2. Make sure that the LED lights up to indicate that the headphones are charging.
3. Once the LED indicator has turned steady green, the headphones are fully charged.

Using Spotify Tap
Get straight to the music with Spotify Tap. Wherever your day takes you, Spotify Tap is the easiest, most personal way to take your music with you, and it’s ready in seconds. Spotify Tap allows quick access to music recommendations based on your taste.

1. Press the M-button for a recommendation.
2. Press again for the next recommendation

• Push the M-button to play a recommendation based on your listening taste.
• Push the M-button again for the next recommendation made just for you.

To use Spotify Tap, make sure your Spotify app is up to date.

M-BUTTON
Push the M-button to access a custom action, that can be selected in the Marshall Bluetooth app. By default, the M-button action is Spotify Tap.

Connecting to a 3.5mm Sound Device
Use the included audio lead to connect to an analogue audio output.

1. Connect the audio lead to the 3.5mm AUX port on the headphones and the sound device.
2. Ensure Bluetooth audio is paused on the sound device.

Use the included audio lead to connect to an analogue audio output.
Note: Make sure that the sound device’s volume is set to low before plugging in the headphones.

1. Connect the audio lead to the 3.5 mm AUX port on the headphones, and the 3.5 mm stereo output on the sound device.
2. Make sure that any Bluetooth audio is paused and start playing on the sound device.

CONNECTING HEADPHONES TO YOUR MAJOR V
Let a friend connect their headphones to the 3.5 mm AUX port on your Major V and listen together.

1. Ensure that Major V is connected to your sound source via Bluetooth.
2. Connect the 3.5 mm jack of the other headphones to the 3.5 mm AUX port on Major V.

CLEANING YOUR MAJOR V
Headphones come in close contact with your skin frequently and sometimes for long periods of time. This may over time cause build-up of dirt and grease that can affect performance and cause skin irritation. Clean your headphones regularly to keep them fresh and make them last longer. Unplug any cables before cleaning the headphones. Make sure everything is completely dry before charging the batteries, plugging in any cables or using the headphones.

Remove the ear cushions by turning them anticlockwise and clean them separately. To put back the ear cushions, place them on the ear cups, tilted at a 45° angle, and turn them clockwise to lock them in place. Gently clean the headphones, headband, ear cushions and cables with a lintfree cloth, slightly damp with either:

• water,
• 70% isopropyl alcohol, or
• 75% ethyl alcohol

Avoid getting moisture in any openings or in the speaker mesh. Carefully clean those areas with a dry and soft brush, or a cotton swab.

• Do not use any sharp objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the headphones in any cleaning agents.
• Do not rinse the headphones under running water.

Connecting Headphones to Another Device
Allow a friend to connect their headphones to yours via the 3.5mm AUX port.

1. Ensure your device is connected to the source via Bluetooth.
2. Connect the other headphones to your device’s AUX port.

Cleaning Your Headphones
Regularly clean your headphones to maintain performance and hygiene.

1. Disconnect all cables before cleaning.
2. Ensure headphones are completely dry before use or charging.

BATTERY CARE GUIDE
Your headphones come equipped with high-performance lithium-ion batteries with a life span that is affected by charging and usage. Follow the guidelines below to keep your batteries in great condition for as long possible.

1. Avoid using fast chargers if possible. Fast charging causes stress on the battery and will degrade it.
2. Avoid letting the battery drain completely or charging it when it’s already full. Try to keep the charge between 30% and 80%.
3. If the headphones are stored for a long time, it’s recommended to charge them to about half-charge and then do a factory reset. Store the headphones in a cool, dark, and dry place.
4. Avoid using or charging the headphones in hot and unventilated places, 45°C/113°F and above.
5. Avoid charging the battery at low temperatures, below 10°C/50°F and using the headphones below 0°C/32°F.
6. Avoid strong mechanical shocks such as dropping the headphones on hard surfaces as it might harm the batteries.

Download the Marshall Bluetooth app and select the battery preservation level that best suits you and your headphones.

PAIRING A NEW DEVICE
Major V can be connected with two devices at a time and remembers up to 10 previously paired devices. When in range, they will try to reconnect with the last connected device.

1. Start with the headphones turned on.
2. Double press the Control knob and the LED turns to a slow blue pulse.
3. Select MAJOR V from your sound device’s Bluetooth list.

RESETTING THE HEADPHONES
If your headphones become erratic or unresponsive, follow the instructions below.

1. Push and hold the control jog for 10 seconds to restart the headphones.
   If the problem persists, perform a factory reset.
   Note: This will delete all user settings and the headphones will need to be paired again.

2. Remove MAJOR V, and MAJOR V [LE] if present, from your sound device’s Bluetooth list and the Marshall Bluetooth app.

3. Push and hold both the control jog and the M-button for 10 seconds and release when the LED indicator turns purple.

4. The headphones have returned to their factory settings and are ready to be paired, see the section Getting started.

MARSHALL BLUETOOTH APP
Download the Marshall Bluetooth app to get the most out of your headphones and keep them up to date with the latest software.

TROUBLESHOOTING

Follow the in-app instructions to ensure that Major V has the latest firmware version.
| There is a software error.| Perform a factory reset, see the section Resetting the headphones.
| | The headphones need to be set up again.
PROBLEM| CAUSE| ACTION
---|---|---
Spotify does not| The Spotify app is not| Install the latest version
start| installed on your sound| of the Spotify app on
| device.| your sound device.
| The M-button is| Download the
| configured with a| Marshall Bluetooth
| different action.| app and connect
| | to the headphones
| | to customise the
| | M-button behaviour.

All intellectual property in the product and packaging (including the MARSHALL trade mark, copyright, designs, and patents) are owned by Marshall Group AB and may not be used without permission. All rights reserved. The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Marshall Group AB is under license. Google Play is a trademark of Google LLC. App Store is a service mark of Apple Inc., registered in the U.S. and other countries Marshall Group AB, Centralplan 15, 111 20 Stockholm, Sweden. R 1.0

Frequently Asked Questions (FAQ)

Q: How do I customize the M-button functionality?
A: Use the Marshall Bluetooth app to customize the action assigned to the M-button.

Q: Can I use the headphones while they are charging?
A: It is not recommended to use the headphones while charging to avoid any potential safety hazards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>