Tech-Life TL3BM00 BeatClip Vehicle Service Instruction Manual
- July 27, 2024
- Tech-Life
Table of Contents
TECH-LIFE BEATCLIP – OPERATING INSTRUCTIONS
TL3BM00 BeatClip Vehicle Service
What’s in the box:
- 1 x BeatClip Speaker
- 1 x USB-C charging cable
- 1 x Instruction Manual
Getting Started
1-Charge it Up!
- We recommend a full charge to maximize battery life.
- The Type C charge port is located on the bottom of the speaker.
- When plugged in a solid red light will illuminate to indicate the speaker is charging.
2-Turn it On!
- Press and hold power button for 2-seconds until speaker says “Hello”.
3-Pair it up!
- The BeatClip will automatically go into pairing mode.
- In your device’s Bluetooth Menu look for “TECH-LIFE BEATCLIP”.
- The Speaker will say “YOUR DEVICE IS CONNECTED” when pairing is successful.
- You’re ready to go!
VOICE PROMPT MEANINGS:
- “Battery level high” = 81-100% battery charge remaining.
- “Battery level medium” = 16-80% battery charge remaining.
- “Battery level low” = 1-15% battery charge remaining.
- “Low battery” during playback = <5% battery charge remaining.
- ‘I’m ready to pair a device” = The speaker is in pairing mode and is ready to connect.
- “Your device is connected” = The speaker has successfully connected to your device.
- “Your device is disconnected” = The speaker has disconnected from your device.
- “Power off, goodbye” = The speaker has been successfully shut down.
BUTTON FUNCTIONS:
- Power on/ Power off – Hold down the power button.
- Play/Pause from Speaker – You can play or pause your music simply by single clicking the power button.
- Answer call/ Hang-up call: Single click the power button to answer or end a phone call.
- Track Change – Long-Press -/+ Volume buttons for track forward or track backward to skip songs.
EXTRA DETAILS:
- Automatic Power-Off – If there is no device connected to the speaker for 60 minutes, the speaker will automatically power-off to save battery.
- Tech Specs
- Power Output: 5 Watts
- Play Time Estimate: Up-to 14 hours
- Bluetooth 5.0, A2DP Audio protocol
- Connection Distance: 50ft to phone
If All Else Fails, Get in Touch:
support@tech-life.com
facebook.com/TechLifeOfficial
instagram.com/TechLifeOfficial
www.tech-life.com
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
FCC ID: 2ARTGTL3BM-00
References
- Login • Instagram
- The Most Iconic Photographs of All Time - LIFE
- Portable high fidelity wireless Bluetooth speakers for music lovers!