mipeace MI-11 Wireless Audio Receiver User Manual

mipeace MI-11 Wireless Audio Receiver

Operating Instructions

1. Powering On
   Press and hold the multifunction button for 3 seconds, the blue light will flashes.

2. Powering Off
   Press and hold the multifunction button for 5 seconds, the red light will flashes.
   Please charge it before the first use and at least once every two months to keep the battery fresh and capable of holding a full charge.

3. Charging

4. When the LED flashes red, the battery is low and needs recharging.

5. Connect the USB charging cable to the receiver and plug the other end into a USB port on a PC or a DC 5V/1A charger.

6. It will take about 1.5 hours for a full charge. The LED will illuminate solid red during charging and turn off when complete

Pairing and Connection

1. Plug your 3.5mm wired headphones into the 3.5mm porton the receiver. Alternatively, connect the receiver to non-Bluetooth speakers or a car stereo system using a 3.5mm to3.5mm audio cable.
2. Turn on the receiver and enter pairing mode (the indicator light will flash blue and red alternately).
3. Turn on Bluetooth on your phone, search for the Bluetooth ID “Mipeace”, and select it. Wait until you hear a prompt voice saying “connected,” indicating that the pairing is finished

Calling

Play Music

LED Indications

Maintenance

Read the following recommendations before using the receiver:

1. Keep the receiver away from liquid, moisture, and humidity to avoid damaging the internal circuitry.
2. Avoid using abrasive cleaning solvents to clean the receiver.
3. Do not expose the receiver to extreme temperatures, as thiscan shorten the life of the device and damage the battery.
4. Do not dispose of the receiver in fire to prevent explosions.
5. Avoid contact with sharp objects to prevent scratches and damage.
6. Do not drop the receiver to protect the internal circuitry.
7. Do not disassemble the receiver unless you are a professional.
8. Store the receiver in a dry, temperature-controlled place when not in use for an extended period.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF warning statement:

1. The device has been evaluated to meet general RF exposure requirements.
2. The device can be used in portable exposure conditions without restriction.

WARRANTY

The warranty covers normal use only. Man-made damages from unsuitable power sources, devices, or improper use, and damages from non-approved repairs, misuse, or improper installation void the warranty. Shipping fees are not included.

Made in China

FAQ

1. What should you do if the receiver won’t turn on or off?
2. Please charge the receiver for a few times.
3. What should you do if the receiver won’t pair or connect?
4. a. Ensure the Bluetooth device is within 10 meters (33 feet).
5. b. Make sure the receiver is in pairing mode.
6. What should you do if there is noise, delay, or echo during phone calls?
7. Clip the receiver to your collar, keeping it within 30 centimeters (12 inches) of your mouth.
8. Can it work with a TV or wireless headphones?
9. It is a wireless audio receiver that receives Bluetooth signals but does not transmit. It does not support multipoint connections.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>