IMOU A26HS Network Camera User Guide
- June 6, 2024
- imou
Table of Contents
Quick Start Guide
Version 1.0.0
Packing List
Camera Introduction
Note: Press and hold the reset button for 10 s to reset the camera.
The pattern of the LED indicator is included in the following table.
LED Indicator Status | Device Status |
---|---|
Off | •Powered off/LED turned off |
•Rebooting after reset
Red light on| •Booting
•Device malfunction
Greenlight flashing| Waiting for network
Greenlight on| Operating properly
Red light flashing| Network connection failed
Green and red lights flashing alternately| Firmware updating
About the Guide
– This quick start guide is for reference only. The minor differences might be
found in the user interface.
– All the design and software here are subject to change without prior written
notice.
– All trademarks and registered trademarks mentioned are the properties of
their respective owners.
– Please visit our website or contact your local service engineer for more
information.
– If there is any uncertainty or controversy, please refer to our final
explanation.
Operating with Imou Life App
Step 1
Scan the following QR code or search “Imou Life” in Google Play or App Store
to download and install the app.
Note: If you have installed the app, update it to the latest version.
http://mobile.easy4ipcloud.com/imou/detect.html
Step 2
Run You Life App, and then register an account for the first use.
Step 3
Connect the camera to the power source with the power adapter.
Step 4
Wait for booting to be finished, and then the camera indicator flashes with
green light.
Step 5
Do the following operations to finish adding the camera.
Note:
If you have more than one camera, do step 5 to add them one by one.
If the Wi-Fi network has changed or the indicator status goes wrong, reset the
camera, and then do step 5 to add it again.
Installing Camera
Note:
Make sure that the mounting surface is strong enough to hold at least three
times the device weight.
Step1 Drill screw holes on the mounting surface as the positioning map
shows, and then put in the expansion bolts.
Step2 Attach the pedestal to the mounting surface with the self-tapping
screws.
Step3 Power up the camera, and then adjust the lens to the ideal angle.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>