KOENIG PLUS NEURATH Staffeltisch Nesting Table Instruction Manual

: July 27, 2024
: KOENIG PLUS NEURATH

Table of Contents

INTRODUCTION
AREA OF APPLICATION
SAFETY INSTRUCTIONS
POSITIONING THE TABLE
FOLDING UP THE TABLETOP
SPACE-SAVING STORAGE
MOTORISED HEIGHT ADJUSTMENT/ LIFT ADJUSTMENT WITH GAS SPRING
CLIP-DOWN CABLE TRAY
LINKING TABLES
CARE AND CLEANING INFORMATION
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KOENIG PLUS NEURATH Staffeltisch Nesting Table

KOENIG PLUS NEURATH Staffeltisch Nesting Table

INTRODUCTION

Dear Customer

You have chosen a quality product from König+Neurath.
To ensure that your furniture performs to your complete satisfaction, please read the following instructions carefully and take note of the safety guidelines.

AREA OF APPLICATION

The table is not suitable for use in the workshop or warehouse, nor in wet areas.
Observe DIN EN 15372 – test level 1+2 medium use.

SAFETY INSTRUCTIONS

Please ensure that power cables are not trapped when connecting the table to the mains.

Do not allow any liquid to enter the table once connected to the mains.

Apply the castor brakes during use.

Motorised adjustment/lift adjustment:
The enclosed operating instructions must be read before initial operation!

Table with motorised adjustment:
To avoid the risk of crushing and shearing, the table must have a clearance of at least 25 mm to adjacent objects.

Move table with motorised adjustment:
First move tabletop to lowest position. Pull out the mains plug and stow the cable in such a way that it will not be damaged during moving.
Release castor brakes.

Caution:
The tabletop must not be folded up during motorised height adjustment.

POSITIONING THE TABLE

**** Turn the castors inwards and lock.

Positioning The Table

Note:
Screens should not be mounted on the table as there is a risk that it will tip over!

FOLDING UP THE TABLETOP

Folding Up The Tabletop

SPACE-SAVING STORAGE

Space-saving Storage

MOTORISED HEIGHT ADJUSTMENT/ LIFT ADJUSTMENT WITH GAS SPRING

Caution:
The enclosed operating instructions must be read before initial operation.
Motorised Height Adjustment/ Lift Adjustment With Gas
Spring

CLIP-DOWN CABLE TRAY

Clip-down Cable Tray

LINKING TABLES

Linking Tables

Note:
Only possible for tables with fixed height!

CARE AND CLEANING INFORMATION

Melamine-coated and metal surfaces:

Clean the surface with a duster. Use warm water and/or a mild cleaner to remove marks, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent visible damage.

Natural wood finishes:

Wipe the surface with a duster. Use a damp cloth and a neutral cleaning agent to remove soiling, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent visible damage. Avoid direct exposure of the natural wood finish to high temperatures and moisture.
Please note that the natural wood finish can change colour over time if exposed to UV rays. This is a natural ageing process of the wood.

No liability is accepted for damage to the finish caused by incorrect cleaning.

CUSTOMER SUPPORT

Deutschland
König + Neurath AG
Industriestraße 1–3
61184 Karben
T +49 6039 483-0
info@koenig-neurath.de
koenig-neurath.com
SAP-Nr. 2221103
Stand 01/2024 / Last updated 01/2024 Logo