TiLite EZ-Ti Permobil Wheelchair Instruction Manual
- October 29, 2023
- TiLite
Table of Contents
EZ-It Premorbid Wheelchair
Instruction Manual
How to order
Catalog
-
Identify CMDs you wish to order and fill out. Please confirm compatibility with the chair you’re ordering.
-
Fill out the catalog page corresponding to that CMD with the required information for us to complete your request.
• EZ-Ti ID, PO#, or Quote# if available.
• Measurements, selections, and special instructions if necessary. -
Email the filled out page(s) to chairs.tilite@permobil.com and include Order Form if applicable.
Order Forms
-
Identify CMDs you wish to order and fill out. Please confirm compatibility with the chair you’re ordering.
-
In the “Notes” section on the last page of the order form, include the following information:
• CMD number(s) being requested.
• Measurements, selections, and special instructions if necessary. -
Submit Order Form via email (chairs.tilite@permobil.com) or fax (509) 586-2413.
EZ-Ti
-
Identify CMDs you wish to order and fill out. Please confirm compatibility with the chair you’re ordering.
-
In the “CMD” section on the Summary page of EZ-Ti, include the following information:
• CMD number(s) being requested.
• Measurements, selections, and special instructions if necessary. -
Submit quote request via EZ-Ti.
Please note, custom requests may impact quote turnaround time and chair build
time. Pricing for these custom options may vary based on the amount of added
labor and material costs.
Offset profiled side guard (removable or fold-down) CMD #7
Clinical rationale
Modification intended to allow for specified offset (height) between edge of
the side guard and edge of rear wheel, giving the customer the ability to
increase the size of the side guard as needed for more protection or comfort.
Available on:
Tillite TR, Tillite TRA, Tillite Aero T, Tillite ZR, Tillite ZRA, Tillite Aero
Z, Tillite TWIST, Tillite Aero X, Tillite 2GX
Notes:
- Requires rigid-removable or fold-down side guards.
- Aluminum or Carbon Fiber side guard must be selected.
- Side guard panel can be above or below the rear tire.
- Side guards will be cut profiling the rear tire if no offset is selected below.
- Aluminum side guards are black powder-coated with edge molding.
- May not work with all chair configurations.
- Folding wheelchair models are not compatible with fold-down side guards.
Required information
(Insert required information for CMD-E to complete this request)
Select one: ❑ Removable OR ❑ Fold-down
Offset: …………….
Above or Below Tire Diameter: ………….
Adapted spacing on desk arm CMD #12
Clinical rationale
Modification indicated to allow for proper fit of client in their wheelchair
due to width constraints on the chair. Modification allows for wider seat
width while maintaining overall chair width.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero Z, Tillite Aero
T, Tillite Aero X, Tillite 2GX, Tillite TWIST
Notes:
- This adaptation is not available with 2-point desk arm option.
- Non-standard desk arm spacing may require rear wheels spacing to be increased for clearance.
- Offsets are selectable in 1/4” increments up to 1”.
- May not work with all chair configurations.
Required information
(Insert required information for CMD-E to complete this request)
Desk Arm Offset (1/4” increments only): ………….
Adapted spacing on flat, rigid removable side guard CMD #15
Clinical rationale
Modification is indicated for individuals who may require more width without
getting a wider seat width measurement, or who may not be eligible for a new
manual wheelchair.
Available on:
Tillites TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite
Aero Z, Tillite Aero X, Tillite 2GX, TiLite TWIST
Notes:
- Non-standard side guard spacing may require rear wheels spacing to be increased for clearance.
- Offsets are selectable in 1/4” increments up to 1”.
- May not work with all chair configurations.
Required information
(Insert required information for CMD-E to complete this request)
Side guard offset (1/4” increments only):……..
Carbon fiber rendered side guards fixed in place CMD #33 Clinical
rationale
Modification is indicated for individuals who require fender side guard to
protect clothes and they do not require it to be removed.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillites ZRA
Notes:
- May not work on all configurations.
- CMD-E to approve clearances and identify limitations.
- Must be on a titanium non-folding backrest.
- Carbon fiber fendered panels ONLY.
- Offset dimension must be no less than 1/4” above rear tire.
Required information
(Insert required information for CMD-E to complete this request)
Default offset will be set at 1/4” above rear tire if no offset dimension is
denoted below
Requested Offset Dimension: ……………..
Titanium welded on calf strap loops CMD #34 Clinical rationale
Modification is indicated for individuals who require precise placement of
calf strap for lower extremity positioning and to prevent rearward migration
of lower extremities on the footplate.
Available on:
TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA
Notes:
- May not work with all chair configurations.
- Only available on Titanium frames.
Required information
(Insert required information for CMD-E to complete this request)
Polished stainless steel side guards CMD #41 Clinical rationale
Modification indicated for individuals who require a side guard and also
desire a side guard that does not remove and has durability.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero
Z, Tillite 2GX, Tillite Aero X
Notes:
- The fixed side guard option is only available on Titanium RIGID wheelchairs with non-folding backrests.
- Side guard panel is profiled to rear wheel unless an offset (above or below the rear tire) is denoted below.
- Rigid-removable side guards are the only ones available on folding chairs (fixed and fold down are not available with folding model wheelchairs.
- May not work with all chair configurations.
Required information
(Insert required information for CMD-E to complete this request)
Offset Dimension: ……………
Folding chair clamp-on, non-removable side guards CMD #60 Clinical
rationale
Modification indicated for individuals who require a side guard and desire a
side guard that does not remove and is compatible with a folding frame.
Available on:
TiLite Aero X, TiLite 2GX
Notes:
- Aluminum or Carbon Fiber side guard must be indicated.
- Side guard panel can be above or below the rear tire.
- Side guards will be cut profiling the rear tire if no offset is selected below.
- Aluminum side guards are black powder coated with edge molding.
- May not work with all chair configurations.
Required information
(Insert required information for CMD-E to complete this request)
Offset: ………..
Above or Below Tire Diameter:……………..
Flat fixed side guards CMD #73
Clinical rationale
Modification indicated for individuals who require a side guard and desire a
side guard that does not remove.
Available on:
Tillite TR, Tillite TRA, Tillite TX1, Tillite ZR, Tillites ZRA
Notes:
- Non-folding backrest required.
- May not work with all chair configurations.
- Side guard panel is profiled to rear wheel unless off-set dimension indicated below.
- Side guard panel can be Aluminum or Carbon Fiber.
Required information
(Insert required information for CMD-E to complete this request)
Offset Dimension:…………
❑ Aluminum OR ❑ Carbon fiber
TiLite manual wheelchairs
Creative Mobility Division
NOT E: Per Mobil’s warranty does not cover Creative Mobility Division
frames and frame components, unless Premorbid determines that the frame or
frame component was defectively manufactured.
2701 West Court St, Pasco, WA 99301
Phone +1 509 586 6117 | 800 545 2266