ANKER PAP 22 MagGo Wireless Charging Station User Guide
- July 26, 2024
- Anker
Table of Contents
ANKER PAP 22 MagGo Wireless Charging Station
QUICK START GUIDEF
Anker MagGo Wireless Charging Station ( Foldable 3-in-1)
FEATURES
- This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
- Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
- Wireless charging products make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.
- The maximum ambient temperature during use of this product must not exceed 40°C.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator & your body.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The equipment complies with IC Radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.
EU Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration
of conformity is available at the following internet address:
https://support.anker.com/s/articleRecommend?otherType=AnkerEN
Extemal_Manual_and_Download&secondType=doc
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
TX/RX Frequency Range and Max Radiated H-Field(Only for EU and UK):
Phone:110.60-145.60kHz; Max Radiated H-Field:-7.35 dBuA/m(@10m)
Phone:356.50-369.40kHz; Max Radiated H-Field:-16.01 dBuA/m(@10m) Apple
Wacth:324.52-328.02kHz; Max Radiated H-Field:-22.47 dBuA/m(@10m) Apple
Wacth:1.697-1.707MHz; Max Radiated H-Field:-23.51 dBuA/m(@10m)
TWS:110.80-146.60kHz; Max Radiated H-Field: -1.88 dBuA/m(@10m)
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Limited
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Indoor use only
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
For tutorial videos, FAQs, manuals, and more information, please visit:
https://support.anker.com
Or scan the QR code below:
support@anker.com
support.mea@anker.com (For Middle East and Africa Only)
(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200
(DE) +49(0)69 9579 7960
(Middle East & Africa) +971 529750842
(UAE) +971 8000320817
(KSA)+966 8008500030
(Kuwait) +965 22069086
(Egypt) +20 8000000826
(AU) +61 3 8331 4800
(TR) +90 (850) 460 14 14
(RU) +8 (800) 511-86-23
(日本) 03 4455 7823
(中国) +86 400 0550 036
(한국) +82 02-1661-9246
Anker Innovations Limited
Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong
Usage Instructions:
Compatibility:
This wireless charger is compatible with MagSafe-enabled devices and is not suitable for non-MagSafe phone cases like Otterbox Defender cases.
Power Requirements:
Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter for efficient charging. Avoid using a 5V/1A wall charger or a USB port on a computer to prevent issues with wireless charging functionality.
Avoid Interference:
Ensure no foreign objects are placed between your device and the charger’s surface, including metal pads, magnetic cards, coins, or NFC cards, as they can impact charging speed, cause overheating, or demagnetize the charger.
Charging Speed:
Wireless charging technology may offer convenience but typically charges devices at a slower rate compared to wired chargers due to current wireless limitations.
FAQ:
FAQ 1: Is the Anker MagGo Wireless Charging Station compatible with all
phone cases?
No, this charger is only compatible with MagSafe phone cases and is not suitable for non-MagSafe cases like Otterbox Defender.
FAQ 2: What type of wall adapter should I use with this wireless
charger?
It is recommended to connect the charger to a Quick Charge 2.0/3.0 or Power
Delivery wall adapter for optimal performance.
Avoid using a 5V/1A charger or USB port on a computer.
FAQ 3: Can I place metal objects on the charger while charging my
device?
Avoid placing any metal objects between your device and the charger’s surface as it may affect the charging speed, cause overheating, or demagnetize the charger.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>