Jiangxi GX810 2.4G Wireless Keyboard and Mouse Set User Guide

GX810
Operation Guide

Specification Description:

The keyboard adopts Bluetooth/2.4G standard – two working modes and is connected to related devices for operation. The product can run on com- puter systems such as Win7, Win8, Win10, Winl11, MAC OS, etc. in 2.4G mode.
Bluetooth mode can run on mobile phones or computer systems with Bluetooth versions.

Hardware requirements

A mobile phone or computer with Bluetooth 5.0 standard and a USB port available for connecting devices.

Switch indication

Charging indication and sleep mechanism

7 indicator lights: NUMLOCK (green), CAPSLOCK (green), 2.4G indicator light (green), BT1 indicator light (blue), BT2 indicator light (blue), Low voltage indicator light (red), charging light (red)
When the CAPS light and NUM light are in the on state and the button is released for 2 minutes, the CAPS light and NUM light will automatically turn off
When the battery is at a low voltage of around 3.3V, the low voltage in- dicator light (red) will flash slowly once every 1 second to indicate
3. When charging, the charging indicator light is always on, indicating that it is fully charged and off
Sleep and Awakening
After releasing the button for 30 minutes, the keyboard enters sleep mode and can be awakened by pressing any key.

Product features

Dimensions: length 460MM width 190MM thickness 50MM; 6-key no charge; Monochrome backlight; 1500mAh battery; The keyboard and mouse share a common receiver;

Light setting monochrome backlight constant on mode

Five levels of backlight brightness (first level off ->second level ->third level ->fourth level ->fifth level), default to the third level, FN+PGUP backlight brightness plus FN+PGDN backlight brightness minus FN+SCRLK switch backlight
The default backlight on the keyboard is always on when powered on.
If there is no action on the button, the backlight will turn off after 2 minutes.
When the battery is low, the backlight will automatically turn off.

Button composite function combination button

Combination buttons| function| Combination buttons| function
---|---|---|---
FN+F1| player| FN+F10| Home page
FN+F2| Vol –| FN+F11| Keyboard lock
FN+F3| Vol +| FN+F12| calculator
FN+F4| Mute| |
FN+F5| Stop| |
FN+F6| Previous song| |
FN+F7| Play/Pause| |
FN+F8| Next song| |
FN+F9| Email| |

Connection method:

Short press the FN+2 combination key to switch to Bluetooth 1 mode, long press the FN+2 com- bination key for 3 seconds to enter Bluetooth 1 mode fo: pairing. When pairing, the blue indicator light flashes quickly, and the pairing time is 2 minutes. The pairing is successful, and the indicator light stays on for 2 seconds. Short press the FN+3 combination key to switch to Bluetooth 2 mode, long press the FN+3 combination key for 3S, and Bluetooth 2 mode enters the pairing mode. When pairing, the blue indicator light flashes quickly, and the pairing time is 2 m nutes. The pairing is successful, and the indicator light stays on for 2 seconds to indicate Bluetooth mode: Turn the power switch to the “ON” state, turn on the computer Bluetooth device pairing, and the keyboard can be used normally.

2.4G connection

Short press the FN+1 combination key to switch to 2.4G mode, long press the ESC+=+combination key 3S2.4G mode to enter the pairing mode. When pairing, the green indicator light flashes quickly, and the pairing time is 20 seconds. The pairing is successful, and the indicator light stays on for 2 seconds. At this time, insert the receiver up close and turn the two power switches to “ON”. The keyboard can be used normally.

List of items

1. Keyboard
2. Mouse
3. 2.4G receiver
4. TYPE-C charging cable
5. Manual warranty card

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received , including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Quality assurance card

Thank you for purchasing the products of our EWEADN. Thank you very much!
To ensure that you can use this product with peace of mind and better To protect your rights, our company strictly implements the joint information product department of the General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China And the “Repair, Replacement, and Return of Microcomputer Products” jointly issued by the State Administration for Industry and Commerce On the basis of the Goods Liability Regulations, we implement after-sales service and hereby make the following commitments:

1, Service validity period:
Effective from the date of purchase, the date recorded in this certificate shall prevail.

2. Service content:

1. From the date of purchase, any product malfunctions caused by poor electrical performance will be free of charge during the warranty period Perform repairs. (The specific maintenance matters shall be handled by the provincial representative or the former product headquarters in the region)

3, Not within the scope of services:

1. Those who have exceeded the effective service or free repair period.
2. Failure to use, maintain, or store according to the correct instructions, resulting in malfunction or damage.
3. Malfunctions or damages caused by unauthorized repair agencies for products that are not EWEADN.
4. Products without dealer registration information and seal on the three guarantee certificate.
5. Unauthorized alteration of the content of the three guarantees certificate.
6.  Consumers can remove the QC PASS sticker at the bottom of the product themselves.
7. Defective products caused by force majeure (such as earthquakes, fires, floods).
8. Product defects caused by human factors (such as operational errors, handling damage, bumps, input discrepancies) Suitable voltage, etc.
9. Other malfunctions or damages caused by non product design, technology, manufacturing, quality, and other issues.

Customer information
User’s Name:
E-mail:
Model No: _
Tel.NO:
Date of Purchase:
This certificate is an important basis for the after-sales service of the products of the EWEADN. Please keep it safe!Note: Please fill in his each item clearly, do not make unauthorized changes, and keep t warranty service card properly,To safeguard your  legitimate rights and interests. If you need service or have any questions, please consult your local dealer orContact us.

Yuandao Industrial (Shenzhen) Co., Ltd., Room 1610, 16th Floor, Jinhao Building, No. 109, Fuyong Section, Guangshen Road, Bao’an District, Shenzhen Jiangxi Jichi Technology Co., Ltd. Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji’an City, Jiangxi Province
Contact number: 0755-23089616
Website: www.eweadn.cn
Product execution standard number:Mouse GB/T 26245-2010
Keyboard:GB/T 14081-2010
Attention: The product images are for reference only and may differ from the actual product. Please refer to the actual product. We apologize for any inconvenience caused!

Want to learn more about scanning QR codes for reference

https://www.eweadn.cn/

Authorized by: Yuandao Industrial (Shenzhen) Co., Ltd
Room 1610, 16th Floor, Jinhao Building, No. 109, Fuyong Section, Guangshen Road, Bao’an District, Shenzhen
Manufacturer: Jiangxi Jichi Technology Co., Ltd
Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji’an City, Jiangxi Province
Contact phone number: 0755-23089616
Website: www.eweadn.cn
Product execution standard number: keyboard GB/T 14081-2010, Mouse GB/T 26245-2010
Attention: The product images are for reference only and may differ from the actual product.
Please refer to the actual product. We apologize for any inconvenience caused!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>