ETI LIGHTING 13IN Led Round Flush Mount Instruction Manual

ETI LIGHTING 13IN Led Round Flush Mount

Specifications

• Product: 13IN. LED Round Flush Mount
• Order #: C01125301A
• Main Light Output: Full brightness with three color temperature options
• Nightlight Mode: Reduced light output at 2000K color temperature
• Color Temperature Settings: 2700K, 3000K, 3500K, 4000K, 5000K

Product Usage Instructions

• Facility:
  • Select a suitable location for mounting the fixture.
  • Turn counterclockwise to open the diffuser shade (B) and expose the mounting holes.
  • Install the mounting screws (AA) without fully tightening.
  • Connect hot and neutral wires from the J-box to corresponding wires in the fixture body (A).
  • Connect the grounding wire from the J-box to the green wire from the fixture body (A). Cover connections with wire connectors (BB) and electrical tape for security.
  • Position wires back inside the electrical box and fasten the mounting screws well.
  • Reinstall the diffuser shade (B) on the fixture body (A).
  • Restore power at the electrical panel and turn on the light switch to activate the fixture.
• Selecting Main Light or Nightlight Mode:
  • To turn on the main light, activate the light switch. To switch to nightlight mode with reduced light output, turn off and back on within 3 seconds. To return to main light mode when in nightlight mode, toggle the switch off and back on.
• Adjusting Color Temperature:
  • Choose a correlated color temperature (CCT) from options: 2700K, 3000K, 3500K, 4000K, 5000K.
  • Move the toggle switch inside the fixture body (A) to select your desired color temperature before attaching it to the lampholder or outlet box.

FAQs

• Q: Can I install this fixture myself if I’m not familiar with electrical work?
  • A: We recommend contacting a qualified electrician for installation if you are unfamiliar with electrical work to ensure safety.
• Q: Ho w do I change the color temperature of the light?
  • A: Use the toggle switch inside the fixture body to select from five color temperature options before attaching the fixture.

PACKAGE CONTENTS

HARDWARE INCLUDED

• NOTE: Keep your receipt and these instructions for proof of purchase.
• WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing an existing light fixture or installing a new one.
• If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.

INSTALLATION

Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture before drilling, based on the type of ceiling.

1. Turn counterclockwise to open the diffuser shade (B) to expose the mounting holes.
2. Install a mounting screw (AA) do not tighten fully.
3. Connect the hot and neutral (black and white) wires from the J-box to the same color wires from the fixture body (A). Connect the grounding wire from the J-box to the green wire from the fixture body (A). Cover the wire connections using the wire connectors (BB). Make sure to fasten them well. Cover the wire connectors (BB) with electrical tape for a more secure connection.
4. Position the wires back inside the electrical box. Make the mounting screw (AA) head cross the large ends of the keyholes on the fixture body (A), slide the base towards the narrow hole, and fasten these screws well.
5. Reinstall the diffuser shade (B) on the fixture body (A). Restore power at the electrical panel. Turn on the light switch to activate the fixture.

SELECTING MAIN LIGHT OR NIGHTLIGHT MODE

• The product can be used in one of two modes: The main light mode, which provides full brightness and allows selection from three color temperatures, or the nightlight mode.
• Nightlight mode provides a reduced light output at 2000K color temperature for very soft illumination at night.

TO TURN ON THE MAIN LIGHT:

• Turn on the light switch to activate the light fixture.

TO CHANGE TO NIGHTLIGHT MODE WITH REDUCED LIGHT OUTPUT:

• Switch the main light off and back on again in 3 seconds to active nightlight mode.
• NOTE: The main light will not provide light output when the nightlight trim is illuminated.

TO RETURN TO THE MAIN LIGHT WITH FULL LIGHT OUTPUT WHEN IN NIGHTLIGHT MODE:

• Toggle the switch off and back on to active.

ADJUSTING THE COLOR TEMPERATURE OF THE LIGHT
This LED light fixture allows you to customize the color temperature of the light using five settings from warm white to daylight.

1. Choose your favorite correlated color temperature (CCT) from five options: 2700K warm white, 3000K soft white, 3500K neutral white, 4000K bright white, or 5000K daylight.
2. Move the toggle switch on the inside of the fixture body (A) to make your selection before attaching the fixture body to the keyless lampholder or electrical outlet box. NOTE: The factory setting for the correlated color temperature (CCT) is 3000K.

CARE AND CLEANING

• CAUTION: Before attempting to clean the luminaire/light fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Clean with a soft, dry cloth. Do not use cleaners with chemicals, solvents, or harsh abrasives. Do not use liquid cleaner on the LEDs, LED driver, or wiring.WARNING: Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so could lead to electric shock, fire, or other injuries which could be hazardous or even fatal. • Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker. • To reduce the possibility of serious injury, always take the proper precautions and unplug the fixture before moving or cleaning. Risk of fire or electric shock.

FCC

NOTICE: This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna, increase the separation between the equipment and the receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and consult the dealer or an experienced radio/TV.

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• See the website for Warranty, Troubleshooting, or Care and Cleaning details at www.etissl.com.

CONTACT

• Questions, problems, missing parts?
• Call ETISSL Customer Service 8 a.m. – 5 p.m., CST, Monday – Friday
• 1-855-ETI-SSLI (1-855-384-7754) www.etissl.com.
• Order # C01125301A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>