Lorelli Jaguar Speed Up Children Tricycle Instruction Manual

July 21, 2024
lorelli

Speed Up!

children tricycle

JAGUAR air tires


age range: from 10 months up to 6 years
max: 25 kg

MANUAL INSTRUCTION

designed in EU


V2.3

www.lorelli.eu

 

find us on

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.

[1]

A

| | G| | M|

1

---|---|---|---|---|---
B| | H| |

N

|

C

| | I|

1

| O|
D| | J| |

P

|

E

| | K| | Q|

1

2

F| | L| |

R

|
|

S

|
[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

Free wheel

[11]

[12]

[13]

[14]

[15]

IMPORTANT! KEEP FOR FUTURE REFERENCE! READ CAREFULLY!

SAFETY REQUIREMENTS

1. WARNING! Do not leave the child unattended!
2. WARNING! Protective equipment should be worn! (helmet, gloves, knee- pads and elbow-pads).
3. WARNING! Protective equipment should be worn. Not to be used in traffic. 25 kg maximum.
4. WARNING! After unpacking the tricycle parts, throw away all packages and plastic bags.
5. WARNING! The child needs to have special skills to use the tricycle and avoid falls or collisions causing injury to the child or third parties!
6. WARNING! It is suitable for children aged 10 – 72 months.
7. WARNING! Not to be used by children over 72 months due to insufficient strength.
8. WARNING! This product shall be assembled by an adult only.
9. WARNING! Before the child ride the tricycle, teach her/him how to step on the footrests, how to control the steering wheel, how to pedal, how to get on and off. If the child can’t ride the tricycle by herself/ himself, support the tricycle by using of the parental control. Teach the child not to dangle her/his legs aside.
10. WARNING! The tricycle should be ridden on even ground. It is forbidden to ride on stairs, bridges, puddles, roads, highways and uneven surfaces. It is forbidden to push the child while she/he is riding.
11. WARNING! The maximum weight of the child is 25 kg and the product is only for one child. The overloading is forbidden, otherwise the child may be injured.
12. WARNING! Read the instruction for use carefully and keep it for future reference. The non-observance of the instructions may harm your child.
13. WARNING! Make sure the safety belt is fixed correctly.
14. WARNING! Before use check if all components are connected.
15. WARNING! Keep small parts out of children’s reach.
16. WARNING! This toy has no brake!
17.WARNING! Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
18. WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.
EN 71-1, 2, 3

CLEANING AND CARE

1. Before use inspect if the tricycle is in good condition. If there are broken or damaged parts change them immediately. Regularly check for loose bolts/ screws.
2. Do not keep the tricycle on wet, very hot or very cold places.
3. Clean the tricycle with wet cloth.
WARNING! If the tricycle has been used on the beach, clean it to remove the sand and the salt from the moving parts and from the wheels.

PARTS

Picture 1
A. Frame
B. Front fork
C. Rear wheels
D. Front wheel
E. Lower parental control
F. F-1 Bolt M8x38; F-3 Bolt M8x120; F-4 Key 6 mm
G. Steering wheel
H. Backrest
I. I-1 Basket;
J. Upper parental control
K. Canopy
L. Foot rest
M. M-1 Rear axles;
N. Fender
O. Seat
P. Latch of seat
Q. Q-1 Cup; Q-2 Brake
R. Front footrest
S. Protective cap

ASSEMBLY
ASSEMBLY OF TRICYCLE

1. Insert Fender (N) in the front fork (B) and tighten the bolt. Picture 2
2. Remove the bolts from the front wheel (D), insert the front fork (B) in the front wheel (D) and tighten the bolts.
3. First place the brake components Q-2 on both sides of the rear axle of the frame. Picture 3 Second: Insert the rear axle in the rear wheels, install them in the back of the frame and tighten the nuts at the end of the axles. Make sure the rear wheels can rotate smoothly.
4. Insert the front wheel (D) in the frame (A). Picture 4.3
5. Insert the steering wheel (G) on the front fork (B) and tighten with bolt (F-1) until you hear a “click”. Picture 4.4
6. Assemble the seat retainer (P) to the seat (O) with the bolt (F-3). Picture 4.5
7. Place the seat on the frame (A) and secure with bolt (F-1).
8. Push the backrest (H) in the seat (O) until you hear “click”. Picture 5.1
9. Remove the screws and plastic elements of the foot rest (L). Install the foot rest under the frame, place the plastic components and tighten bolt. Picture 5.2
10. Remove the plastic bolts of the two sides of the seat (O). Picture 6. Place the front footrest (R) and tighten the bolts on the sides.
11. Install the canopy of the both sides of the seat. Picture 6
12. Insert the top of parental control (J) at the bottom of parental control (E) until you hear “click”. Picture 7.1 then place them in the steering (I-2) and tighten with wrench.
13. Put the basket (I-1) in the rear part of the frame and tighten the plastic bolt. Picture 7.3
14. Place the cup (Q-1) at the top of parental control.

USE OF TRICYCLE

1. For the contraction and expansion of the foot rest, press the plastic ring down and move forward or backward. Picture 8
2. Activate and deactivate the brakes by pressing and releasing the pedals to the rear wheels. Picture 9
3. Turn the front wheel bolt counterclockwise to secure the pedal rotation. Picture 10
4. Turn the front wheel bolt clockwise to release the pedal from the wheel.
5. Adjust the backrest by pressing the side buttons. Picture 11
6. Adjust the canopy by pulling the buttons on both sides. Picture 12;13
7. Option to push. Picture 14 WARNING! To raise the front axle of the tricycle to overcome the obstacle, press the rear axle with the foot, and then pull the handle back against you. Caution: Do not push the handle straight down! First pull the handle toward you !!! Attention: The attemptings to overcome obstacles and applying excessive force to the handle causes a seriouse damage to the handle which is not subject to a warranty repair !!!!!!
8. Optional drive. Picture 15. When the seat and the handle of parental control are removed, put the protection cap (S) on the axis behind the seat. Warning! If your tricycle is provided with an adjustable free-wheeling mechanism on the steering wheel, pedals that can be disengaged from the hub or a button “free handlebar”, please pay attention to the following: When the push handle (parental control) is removed, the free-wheeling mechanism on the steering wheel shall be inactive, the pedals shall be engaged, the button “free handlebar” shall be inactive, otherwise there is a hazard your child to lose control, drop down and hurt itself.
9. Rotate the seat: to rotate the seat you must first tilt the steering wheel in front of it. Picture 16.1 Raise the fixing chop of the steering wheel tube and simultaneously tilt to the front (Picture 16.2; 16.3) until you hear a “click”. Then pull the button under the seat (picture 17.1) and rotate the seat to 180°. Picture 17.2; 17.3

WARNING! To avoid serious injury, always use seat belt!

Optional air tires: Please inflate air tires to the maximum pressure of 0,8 BAR (0,8 ATM) (11,6 PSI) (80 kPa)
WARNING! The volume of the tire is very small and it inflates very quickly! Do not exceed the maximum tire pressure described in the instruction! This can cause its destruction, which is not subject to warranty restoration! Observe the tire’s maximum tire pressure as described in the instruction manual and not that indicated on the tire!

Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +359 54 850 830
e-mails: home.market@didis-ltd.com;
export@didis-ltd.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals