KOHLER K-1947-XHGHL Alcove Heated Bubble Massage Air Bath And Whirlpool Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER K-1947-XHGHL Alcove Heated Bubble Massage Air Bath And Whirlpool
Specifications
- Model: 60 x 30 alcove Heated BubbleMassageTM air bath and whirlpool, left drain K-1947-XHGHL
- Dimensions: 60 x 30 inches
- Weight: 138 lbs (62.6 kg)
- Water Capacity: 57 gallons (215.8 L)
- Electrical Components: Pump – 120 V, 7 A, 60 Hz; Heater – 120 V, 5 A, 60 Hz
- Drain Location: Left
Product Usage Instructions
Before installing the product, ensure you have the necessary electrical service requirements and follow the provided installation instructions carefully.
- Surround and support the body in a warm massage
- Adjustable BubbleMassageTM intensity to 18 levels
- Hydromassage flow and direction control at each jet
- Alcove design for easy installation
Maintenance
- Refer to the website for detailed warranty information and recommended cleaning products for maintaining the product.
FAQ
- Q: What is the water capacity of the product?
- A: The water capacity is 57 gallons (215.8 L).
- Q: What are the electrical requirements for the product?
- A: The pump requires 120 V, 7 A, 60 Hz, and the heater requires 120 V, 5 A, 60 Hz.
- Q: Is the product ADA-compliant?
- A: Yes, the product is ADA-compliant when installed according to specific regulations.
Features
- 118 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust Heated BubbleMassage™ massage intensity to 18 levels
- Single-speed whirlpool revitalizes sore muscles
- 8 fully adjustable whirlpool jets allow users to customize hydromassage flow and direction at each jet
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Hydrotherapy
- Whirlpool
Technology
- The auto-shutoff timer on the blower allows users to enjoy the Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control for Heated BubbleMassage™; air switch actuator for whirlpool
Installation
- Left drain
Required Products/Accessories
-
K-7271 Brass Slotted Overflow Bath Drain
or -
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
- K-1446 Remote Installation Kit
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31797 Slotted overflow bath drain kit
- K-31795 Slotted overflow above-the-floor bath drain kit
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- ADA
- ICC/ANSI A117.1
- IAPMO Certification
- cUL Listed
- UL Listed
KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER®
Hydrotherapy Components Five-Year Limited Warranty
See the website for detailed warranty information.
Available Colors/Finishes
- Color tiles are intended for reference only.
Color Code Description
- 0 White
- 96 Biscuit
- NY Dune
- 95 Ice™ Grey
- 58 Thunder™ Grey
- 7 Black Black™
Dimension
Required Electrical Service
- Three dedicated circuits are required, protected with Class A
- Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).
- Pump, Heater: 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
- Blower: 120 V, 15 A, 60 Hz
Technical Information
- All product dimensions are nominal.
- Drain location: Left
- Basin area, bottom: 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
- Basin area, top: 52-1/8″ x 22-1/16″ (1324 mm x 560 mm)
- Weight: 138 lbs (62.6 kg)
- Minimum floor load: 51.3 lbs/ft² (250.5 kg/m²)
- Water depth: 15-1/8″ (384 mm)
- Water capacity: 57 gal (215.8 L)
- Electrical component rating:
- Pump: 120 V, 7 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz
- Heater: 120 V, 12 A, 60 Hz
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- Remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
- Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
- ADA-compliant when installed to the specific requirements of these regulations.
CONTACT
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
- 2-28-2024 21:48 – US
References
Read User Manual Online (PDF format)
Loading......